268 Emergency situations
fall from a lift if there is a change in ve
hicle weight distribution and balance.
This might happen, for example, when
heavy components such as the engine
block or transmission are removed .
- When removing heavy components like
these, anchor vehicle to hoist or add cor
responding weights to maintain the cen
ter of gravity. Otherwise, the vehicle
might tilt or slip off the hoist, causing
serious personal injury.
(D Note
- Be aware of the following points before
lifting the vehicle:
-The vehicle should never be lifted or
jacked up from underneath the engine
oil pan, the transmission housing, the
front or rear axle or the body side
members. This could lead to serious
damage.
- To avoid damage to the underbody or
chassis frame, a rubber pad must be
inserted between the floor jack and
the lift points.
- Before driving over a workshop hoist,
check that the vehicle weight does not
exceed the permissible lifting capacity
of the hoist.
- Before driving over a workshop hoist,
ensure that there is sufficient clear
ance between the hoist and low parts
of the vehicle.
Data
Data
211 hp, 2.0 liter 4-cyl. engine
Engine data
Maximum output SAE net
Maximum torque SAE net
No. of cylinders
Displacement
Stroke
Bore
Compression ratio
Fuel
Dimensions (approx.)
length (with licence plate bracket)
Width (with outside mirrors folded)
He ight (unloaded)
T urning circle diameter (curb to curb)
Capacities (approx. )
Fuel tank
- Total capacity
- Reserve (of total capacity) hp@rpm
lb-ft@rpm
C[D (cm
3
)
in (mm)
in (mm)
211 @4300-6000
258@ 1500-4200
4
121 (1984)
3 .65 (92.8)
3 .25 (82.5)
9.6: 1
Premium unleaded (91 AKI) Recommended for
maximum engine performance. Further details
Q page 211, Gasoline
B io-Ethanol (ESS ) Vehicles with flexible fuel en
gines may be operated with bio-ethanol fuels
(E85) or with premium unleaded gasoline (91
AKI). Further details Q page 212, Ethanol fuel
(Bio-ethanol).
in (mm)
in (mm)
in (mm)
ft (m)
182.1 (4626)
73.0 (1854)
54.0 (1372)
37.4 (11.4)
gal (liters)
gal (liters)
1.8-2.4
(7-9)
Wind shield and headlight* washer fluid container
Engine oil
with filte r change quarts (liters)
quarts (lite
rs)
4 .8 (4 .5)
4 .9 (4.6)
271
•
•
272 Data
333 hp, 3.0 liter 6-cyl. engine
Engine data
Maximum output SAE net
Maximum torque SAE net
N o. of cylinders
Displacement
Strok e
Bore
C ompressio n ratio
Fuel
Dimensions (approx .)
Leng th (wit h licence pl ate bra ck et)
Width (with outside mirrors folded) He igh t (unloaded)
T urning circle diamet er (curb to curb)
Capacities (appro x.)
Fuel tank
- Total capacity
- Reserve (o f to tal capacity) h
p@rpm
L b-ft@ rpm
C ID (cm
3
)
in (mm)
i n (mm)
333 @ 5500-6500
325
@ 2900-5300
6
182.8 (2995)
3.50 (89)
3 .33 (84.5)
1 0.3 : 1
Premium unleaded (91 AKI) Recomme nded for
m aximum engine performance. Further details
¢ pag e 211, Gasoline
in (mm) 182 .7 (4 640)
in (mm) 73.0 (185 4)
in (mm) 53. 9 (136 9)
ft (m) 37.4 (11.4)
gal (liters) 1 6.1 (61.0)
g al (li ters) 1.8-2 .4
(7 -9)
Windshield and headlight* washer fluid container quarts (li ters) 4.8 (4.5)
Engine oil with filter change qu
arts ( lite rs) 7. 2 (6 .8)
