2013 Alfa Romeo Giulietta button

ELECTRIC SUN ROOF(for versions/markets, where provided)
The sun roof comprises two glass panels; the front one is mobile and
the rear one fixed. These feature two sun blinds (front and rear) that
can be moved manually.
With the roof closed, the blinds can be placed in any position.OPERATIONThe sun roof can be operated only with the ignition key turned to MAR.
The controls A and B fig. 63 on the trim next to the front courtesy light
operate the sun roof opening/closing functions.
Roof opening
Press and hold down button A fig. 63. The front glass panel will move
into the spoiler position. Press button A again and keep it pressed
for more than half a second to automatically move the sun roof to an
intermediate position (“Comfort” position).If button A is pressed again for more than half a second, the roof will
automatically continue until it reaches end of travel position. The front
glass panel can be stopped in an intermediate position by pressing
button A again.
Do not open the sunroof if there is snow or ice on it: you
may damage it.When leaving the vehicle, always remove the key from
the ignition to avoid the risk of injury to those still
inside the car due to accidental operation of the
sunroof. Improper use of the roof can be dangerous. Before
operation, always check that no-one is at risk of being injured by
the moving sun roof or by objects getting caught and dragged
by it.
Closing the sun roof
With the roof in the fully open position, press button B fig. 63 and, if
the button is operated for more than half a second, the front roof glass
will automatically assume the intermediate position (comfort position).
If the button is operated again for about half a second the roof will
assume the spoiler position. Lastly, if closing button B is pressed again,
the roof will move to completely closed position.
fig. 63
A0K0131
81GETTING TO
KNOW YOUR CARSAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

ANTI-PINCH SAFETY DEVICEThe sun roof has an anti-pinch safety system capable of detecting the
presence of an obstacle whilst the roof is closing; when this happens,
the system stops and the movement of the front glass is immediately
reversed.SUN BLINDSTo open the blinds, grip handle A fig. 64, following the direction
indicated by the arrow until the desired position is reached. To close it,
carry out the procedure in reverse.INITIALISATION PROCEDUREAfter the battery has been disconnected or a fuse has blown, the
operation of the sun roof must be initialised again.
Proceed as follows:
❒press button B fig. 63 until the roof is completely closed. Release the
button;❒press B button and keep it pressed for at least 10 seconds and/or
until the glass panel clicks forwards. Release the button at this point;
❒within 5 seconds of the previous operation, press button B and hold
it down: the front glass panel will complete a full opening and
closing cycle. Only release the button at the end of this cycle.
MAINTENANCE/EMERGENCYIn the event of emergency or maintenance, the roof can be moved
manually when there is no power supply (opening/closing of the front
glass panel) by carrying out the following operations:
❒remove the protective cap A fig. 65 located on the internal lining,
between the two sun blinds;
❒take the Allen key B supplied, which is located in the on-board
documentation container or in the tool container in the luggage
compartment;
❒introduce the key into housing C and turn it clockwise to open the
roof or anticlockwise to close the roof.
fig. 64
A0K0233
fig. 65
A0K0132
82GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

DOORSDOOR CENTRAL LOCKING/
UNLOCKINGLocking from the outside
With the doors closed, press the
button on the key or turn the metal
insert (located inside the key) in the driver side door lock.
The LED above the
fig. 66 button switches on to indicate that the
doors have been locked.
The door locking function is operated:
❒with all the doors closed;
❒with all the doors closed and the luggage compartment open:Door unlocking from the outside
Press the
button on the key or turn the metal insert (located inside
the key) in the driver side door lock.
Door locking/unlocking from the inside
Press thebutton. The button has an LED that indicates whether the
doors are locked or unlocked.
LED on: doors locked. Press button
once again to centrally unlock
all doors. The LED will switch off.
LED off: doors unlocked. Press the button
again to centrally lock all
doors. The doors will be locked only if all the doors are properly
shut.
Once the doors have been locked via the remote control or the key
pawl, it will no longer be possible to unlock them by pressing button
.
IMPORTANT With central locking active, pulling the internal opening
lever of the passenger side door unlocks the door (the LED stays on).
Pulling the internal opening lever of the driver side door activates
central unlocking.
IMPORTANT The rear doors cannot be opened from the inside when
the child lock device is engaged.
In the absence of electrical power supply (blown fuse, battery
disconnected, etc.) it is still possible to lock the doors manually.
fig. 66
A0K0145
83GETTING TO
KNOW YOUR CARSAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

EMERGENCY DOOR LOCKING DEVICEFront passenger side door
The front passenger side door has a device to lock it when there is no
current.
To lock it, fit the metal insert of the ignition key in the housing A fig. 68
and move it upwards.
Rear doors
The rear doors are fitted with an emergency device that allows the
doors to be locked when there is no current.
In this case proceed as follows:
❒insert the metal insert of the ignition key into housing B fig. 67;
❒turn the key anticlockwise and then remove it from housing B.The door lock knob can be realigned (only when the battery charge
has been restored) as follows:
❒Press the
button on the key;
❒press thebutton on the dashboard to lock/unlock the doors;
❒open a front door by inserting the key into the key pawl;
❒operate the internal door handle.
If the child lock was engaged and the previously described
locking procedure carried out, operating the internal handle
will not open the door but will only realign the door lock
knobs. To open the door, the outside handle must be used. The door
central locking/unlocking button
is not disabled by the
engagement of the emergency lock.
IMPORTANT If the battery is disconnected or the protection fuse blows,
the door opening/closing mechanism must be initialised as follows:
❒close all the doors;
❒press button
on the key or button
for locking/unlocking the
doors on the instrument panel;
❒press button
on the key or button
for locking/unlocking the
doors on the instrument panel.
fig. 68
A0K0275
85GETTING TO
KNOW YOUR CARSAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

ELECTRIC WINDOWSThese operate when the ignition key is turned to MAR and for about
three minutes after turning the key to STOP or removing it if one of the
front doors is open.
The buttons are located in the door panel trim (the driver side door
panel can be used to operate all the windows). An anti-pinch device
operates when the front and rear windows are raised.CONTROLSDriver side front door fig. 69
❒A - Opening/closing front left window; “continuous automatic”
operation during window opening/closing stage;
❒B - Opening/closing front right window; “continuous automatic”
operation during window opening/closing stage;
❒C - Enabling/disabling of rear door electric window controls;
❒D - opening/closing rear left window (for versions/markets, where
provided); “continuous automatic” operation during window
opening/closing stage;
❒E - Opening/closing rear right window (for versions/markets, where
provided); “continuous automatic” operation during window
opening/closing stage.
Push the buttons to open/close the desired window.
When one of the two buttons is pressed briefly, the window moves in
stages; if the button is held down, “continuous automatic operation”
is activated both for closing and opening.
If the control button is pressed again, the window will stop in the
desired position. If the button is held down for several seconds, the
window raises or lowers automatically (only with ignition key in MAR
position).Front and rear passenger doors
(for versions/markets, where provided)
On the passenger side front door control panel, and on some versions
also on the rear doors, buttons F fig. 69 are provided to control the
associated windows.
fig. 69
A0K0067
86GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

Anti-crush safety device
The car is equipped with an anti-crush function for the raising of the
front and rear windows.
This safety system detects the presence of an obstacle during the
window closing travel and intervenes by stopping and reversing the
window travel, depending on its position. This device is also useful
if the windows are activated accidentally by children on board the car.
The anti-crush safety function is active both during the manual and
the automatic operation of the window. When the anti-crush system is
activated, the window travel is immediately interrupted and then
reversed. The window cannot be operated in any way during this time.
IMPORTANT If the anti-crush protection intervenes 5 consecutive times
within a minute or is faulty, the automatic closing operation of the
window is inhibited, only allowing it in steps of half a second with the
button released for the subsequent manoeuvre.
In order to restore the correct operation of the system, the relevant
window must be lowered.
IMPORTANT With ignition key at STOP or removed, the electric
windows remain active for about 3 minutes and are deactivated when
a door is opened.
IMPORTANT With the anti-crush system, when the
button on the
remote control is pressed for longer than 2 seconds the windows will
open, whilst if the
button is pressed for longer than 2 seconds
the windows will close.
The system conforms to the 2000/4/EC standard concerning
the safety of passengers leaning out of the passenger
compartment.Incorrect use of the electric windows may be
dangerous. Before and during operation, always check
that no passenger is at risk of being injured directly
by the moving window or by objects getting caught in or
dragged by the window. When leaving the car, always remove
the key from the ignition to prevent accidental operation of the
electric windows from being a hazard for those still on board.
Electric window system initialisation
The system must be re-initialised after disconnecting the battery or if
the relevant protection fuse is blown.
Initialisation procedure:
❒fully close the window to initialise with manual operation;
❒after the window has reached the upper end of travel, hold down
the closing control for at least 1 second.
For versions/markets where provided, after a break in power supply
for the control units (battery replaced or disconnected or protective
fuses for the electric window control units replaced), the automatic
operation of the windows must be restored.
87GETTING TO
KNOW YOUR CARSAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

The restoration procedure must be performed as described below with
the doors closed:
❒completely open the driver's door window, holding the operating
button down for at least three seconds after the (lower) end of travel
position;
❒completely raise the driver side window and hold the button down
for at least 3 seconds once the (upper) end of travel position has
been reached;
❒proceed in the same way as described in points 1 and 2 for the
passenger side door;
❒make sure that the initialisation is correct by checking that the
windows work automatically.
LUGGAGE COMPARTMENTThe luggage compartment is unlocked electrically and cannot be
unlocked when the car is in motion.OPENINGWhen unlocked, the boot can be opened from outside the car by
pressing the electric logo fig. 70 until a click is heard which indicates
unlocking or by pressing the
button on the remote control.
The direction indicators will flash twice and an internal light will switch
on when the luggage compartment is opened: the light switches off
automatically when the luggage compartment is closed. The light
switches off automatically after a few minutes if the luggage
compartment is left open.
fig. 70
A0K0068
88GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

Emergency opening from the inside
Proceed as follows:
❒remove the rear head restraints and completely fold back the seats
(see the paragraph “Expanding the luggage compartment”);
❒push lever A fig. 71.CLOSINGLower the tailgate, pressing near the lock until you hear it click into
place.
There are handles B fig. 72 inside the tailgate to allow it to be closed
more easily.
IMPORTANT Before closing the luggage compartment make sure that
you have the keys since the luggage compartment is automatically
locked.
LUGGAGE COMPARTMENT
INITIALISATIONIMPORTANT If the battery is disconnected or the protection fuse blows,
the luggage compartment opening/closing mechanism must be
initialised as follows:
❒close all the doors and the luggage compartment;
❒Press the
button on the remote control;
❒Press thebutton on the remote control.
EXTENDING THE LUGGAGE
COMPARTMENTThe luggage compartment can be partially (1/3 or 2/3) or totally
extended by splitting the rear seat. See the descriptions in “Removing
the parcel shelf” and “Folding back the seats” paragraphs for how
to expand the luggage compartment.
fig. 71
A0K0069
fig. 72
A0K0181
89GETTING TO
KNOW YOUR CARSAFETY
STARTING AND
DRIVING
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX