216
Other Features
Multi-View Rear Camera
Your vehicle is equipped with a multi-view rear camera. When you shift into Reverse,
the rear view is displayed on the navigation system screen. The edge of the bumper
and parking guide lines are also displayed.
To turn the guide lines on or off, press
and hold the CANCEL button for
about three seconds.
Rotate i to adjust the screen
brightness.
While the rear view is displayed, press
u to switch between WIDE, NORMAL,
and TOP DOWN view modes.
1Multi-View Rear Camera
Always keep the camera lens clean and unobstructed. The multi-view rear camera has a
lens that makes distances appear different than
they actually are. Always take care when reversing, and look behind you for obstacles.
Navigation controls are disabled when in
Reverse.
Adjusting the brightness for the multi-view rear camera display does not affect the brightness for
the navigation screen.
If you turn the guide lines off, they remain off until you turn them back on.
The last used viewing mode is selected the next
time you shift into Reverse. However, once the WIDE mode is selected if TOP DOWN view was
last used.
Multi-View Rear Camera
Screen display
Bumper
Guide lines
Camera
Approx. 1 m (3.3 ft)
Approx. 2 m (6.6 ft)
Approx. 3 m (9.8 ft)
Approx. 50 cm
(1.7 ft) Tailgate open range
Approx. 3 m (9.8 ft)
Approx. 2 m (6.6 ft)
Approx. 1 m (3.3 ft)
WIDE
NORMAL
TOP DOWN
RDX_KA-31TX4800.book Page 216 Monday, January 30, 2012 11:32 PM
QRG
power mode is set to VEHICLE OFF (LOCK),
