2013 Acura MDX turn signal bulb

[x] Cancel search: turn signal bulb

Page 77 of 617

Acura MDX 2013  Owners Manual Vehicle Stability Assist
(VSA) System Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. It flashes when VSA is
active (see page 47

Page 535 of 617

Acura MDX 2013  Owners Manual Replacing Front Turn Signal/
Parking and Side Marker Light
Bulbs1. Open the hood.
2. Remove the front bulkhead cover
(see page 516).
3. Remove the socket by turning it
one-quarter turn counterclockwis

Page 537 of 617

Acura MDX 2013  Owners Manual 5. Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
6. Remove the bulb from the fog light
assembly by turning it one-quarter
turn counterclockwise.Re

Page 539 of 617

Acura MDX 2013  Owners Manual 2. Remove the socket by turning it
one-quarter turn counterclockwise.
3. Pull the bulb straight out of its
socket.
4. Push the new bulb straight into
the socket until it bottoms.
5. Turn on the lights

Page 585 of 617

Acura MDX 2013  Owners Manual Lights
Headlights High 60 W (HB3)
Low
ᤳ1
35 W (D2S)
Daytime running lights 60 W (HB3)
Front side marker lights 3 CP
Front turn signal lights 21 W (Amber)
Parking lights 3 CP
Stop/Tail lights LED
ᤳ

Page 614 of 617

Acura MDX 2013  Owners Manual Side Curtain Airbags
....................
35
How Your Side Curtain Airbags
Work
....................................
35
Side Marker Lights, Bulb
Replacement in
.......................
529
Signaling Tu