2013.5 PEUGEOT 5008 phone

[x] Cancel search: phone

Page 307 of 404

PEUGEOT 5008 2013.5  Owners Manual 305
SETUP
  Settings 2
Automatic answering system3
Select ring tone3
Phone/Ring tone volume3
Enter mailbox number3
Internal phone settings3
Automatically accept call3
Signal waiting call (?)3
Show sta

Page 312 of 404

PEUGEOT 5008 2013.5  Owners Manual 310
QUESTIONANSWERSOLUTION
 The route calculation is not successful.  The exclusion criteria may confl ict with the current location (exclusion of toll roads on a toll motorway).  Check the exclusion

Page 313 of 404

PEUGEOT 5008 2013.5  Owners Manual 3 11
QUESTIONANSWERSOLUTION
 The system does not receive SMS.  The Bluetooth mode does not permit sending of the SMS to the system.  Use your SIM card and the internal telephone. 
 The SIM card used i

Page 315 of 404

PEUGEOT 5008 2013.5  Owners Manual 313
  The system is protected in such a way that it will only operate in your vehicle.  
PEUGEOT Connect Nonnect Nonnectavigation (RT6) 
  01  First steps - Control panel   
  For safety reasons, the

Page 317 of 404

PEUGEOT 5008 2013.5  Owners Manual 315
01
  Continuous  press: reinitialisation of the system.  
  Open  the  " Telephone "  menu and display the list of recent calls or accept an incoming call.  
 FIRST  STEPS 
  Short press: select p

Page 318 of 404

PEUGEOT 5008 2013.5  Owners Manual 316
02
   RADIO: select the previous/next preset station. 
 Select the next entry in the address book.   Select the next entry in the address book.  
SRC/TEL   button: 
 change the audio source. 
 sta

Page 319 of 404

PEUGEOT 5008 2013.5  Owners Manual 317
03
  For the details of the menus, refer to the "Screen menu map" section.     For cleaning the screen, the use of a soft, non-abrasive cloth (spectacles cloth) is recommended, with no additional

Page 320 of 404

PEUGEOT 5008 2013.5  Owners Manual 318
03
 A press on the knob gives access to short-cut menus according to the display in the screen.  
Display according to context 
  RADIO: 
 Activate / Deactivate TA 
 Activate / Deactivate RDS 
  M