104
Starting at temperatures
above zero
- Press the brake pedal.
- Make one short press (about one second)
on the START/STOP
button.
Starting at temperatures
below zero
You must initiate preheating of the Diesel
engine:
- Without
placing your foot on the brake
pedal, make a first short press on the
START/STOP button.
- Wait until the preheater warning lamp
goes off.
- With
your foot on the brake pedal, make
a second short press on the START/
STOP button.
Driving safely
Starting - stopping the engine
Before starting
- Place the gear lever in neutral or in
position N
for an electronic or automatic
gearbox.
- Insert the electronic key in the reader or
keep the Keyless Entry and Starting key in
the vehicle.
Starting-switching off the engine
Insert the electronic key in the reader.
Press the brake pedal for vehicles with
an automatic or electronic gearbox, or
fully declutch for vehicles with a manual
gearbox.
Starting using
the electronic key
Starting with the "Keyless
Entry and Starting" system
If one of the starting conditions is not
met, a reminder message appears in
the instrument panel screen. In some
circumstances, it is necessary to turn
the steering wheel slightly while pressing
the "START/STOP" button to assist
unlocking of the steering; a message
warns you when this is needed.
With a manual gearbox
, put the gear lever in neutral.
With an electronic gearbox
, put the gear lever in N
.
With an automatic gearbox
, put the gear lever in P
or N
.
For Diesel vehicles
, in
temperatures below zero the
engine will not start until the
preheater warning lamp has gone off.
If this warning lamp comes on after
pressing "START/STOP", you should
hold the brake or clutch pedal down
until the warning lamp goes off and
do not press the START/STOP button
again.
With the electronic key inside the vehicle
(it is not necessary to put it in the reader),
press the brake pedal for vehicles with an
automatic or electronic gearbox, or fully
declutch for vehicles with a manual gearbox.
Press the " START/STOP
"
button.
The engine starts (see the
warning below for Diesel
vehicles).
Press the " START/STOP
" button.
The engine starts (see the
warning below for Diesel
vehicles).
The "Keyless Entry and Starting" device
must be in the recognition zone.
For safety reasons, do not leave
this zone with the vehicle running.
