2013.5 Citroen DS4 RHD window

Dual-zone digital air conditioning
The air conditioning system operates when the engine is running.


Automatic operation


1. Automatic comfort programme

We recommend the use of one of
the three AUTO modes available:
they provide optimised regulation of
the temperature in the passenger
compartment according to the comfort value
that you have chosen.
These three modes automatically adjust the
air flow, according to the desired setting, while
also maintaining the desired comfort value.


Press the "AUTO "
button repeatedly:


- a first indicator lamp comes on; the
"light" setting mode is selected,

- a second indicator lamp comes on; the
"medium" setting mode is selected,

- a third indicator lamp comes on; the
"intense" mode setting is selected.
When the engine is cold, the air
flow will reach its optimum level
progressively, taking account of the
weather and the desired comfort level
so as to avoid too great a distribution
of cold air.
On entering the vehicle, if the interior
temperature is much colder or warmer
than the comfort value, there is no
need to change the value displayed in
order to obtain the comfort required.
The system corrects the difference
in temperature automatically and as
quickly as possible.
This system is designed to operate effectively
in all seasons, with the windows closed.

5. Air conditioning On / Off




Press this button to switch off
the air conditioning.
Switching the system off could result in
discomfort (humidity, condensation).



Press this button again to return to
automatic operation of the air conditioning.
The indicator lamp on the "A /C "
button
comes on.



6. Air distribution adjustment




Press one or more buttons to
direct the air flow towards:


- the windscreen and side windows
(demisting or defrosting),

- the outer and centre air vents,

- the footwells.

You can combine the three orientations to
obtain the desired air distribution.


7. Air fl ow adjustment




Turn this control to the left to
decrease the air flow or to the
right to increase the air flow.


8. Air intake / Air recirculation




Press this button for
recirculation of the interior
air. The indicator lamp in the
button comes on. The air flow indicator lamps, between the two
fans, come on progressively in relation to the
value requested.


9. "REST" function: ventilation
with the engine off
Even with the engine is off, you can
operate the ventilation for a few
minutes.
Air recirculation enables the passenger
compartment to be isolated from exterior
odours and smoke.



As soon as possible, press this button
again to permit the intake of outside air and
prevent the formation of condensation. The
indicator lamp in the button goes off.
For example, while you are away from the
vehicle, the passengers can still enjoy some air
circulation without having the engine running.
This function is available after switching on the
ignition, as well as after stopping the engine.
The period that the function is available
depends on the state of charge of the battery.
You can activate the "REST" function while the
air conditioning control screens are on.

Avoid prolonged operation in interior air
recirculation mode (risk of misting and
deterioration of air quality).

Front demist - defrost


These markings on the control panel indicate the control positions for rapid demisting or
defrosting of the windscreen and side windows.


With manual air
conditioning



Put the temperature, air flow and
distribution controls to the dedicated
marked position.


Put the air intake control to the "Exterior air
intake" position
(indicator lamp on the control off).


Switch on the air conditioning by pressing
the "A /C "
button; the warning lamp in the
button comes on.



With digital dual-zone air
conditioning

With Stop & Start, when the demisting,
air conditioning and air flow functions
are activated, STOP mode is not
available.


Automatic visibility programme




Select this programme to demist or defrost
the windscreen and side windows as
quickly as possible.
The system automatically manages the air
conditioning, air flow and air intake, and
provides optimum distribution towards the
windscreen and side windows.



To stop the programme, press either the
"visibility"
button again or "AUTO "
, the
warning lamp on the button goes off and
the warning lamp on the "AUTO "
button
comes on.
The system starts again with the values in
use before it was overridden by the visibility
programme.






With Stop & Start, when demisting has
been activated, the STOP mode is not
available.

Remote control key
System which permits central unlocking or locking of the vehicle using the door lock or from a distance. It is also used to locate and start the vehicle,
as well as providing protection against theft.









Unlocking the vehicle


Unfolding the key




Press this button to unfold the key.



Complete unlocking using the
remote control

Selective unlocking using the
remote control



Press the open padlock to unlock
the vehicle completely.




Press the open padlock once to
unlock the driver's door only.


Press the open padlock again to unlock the
other doors and the boot.



Opening the windows using the
remote control



Maintain the press on the open
padlock until the desired position
is obtained. The windows stop as
soon as you release the button.



Programming the unlocking

The complete or selective door
unlocking parameter is set via the
vehicle configuration menu.

103Access


Closing the windows using the
remote control



Press and hold down the closed
padlock until the desired position
is obtained. The windows stop
when you release the button.
When closing the windows using the
remote control you must ensure that
nothing prevents them from closing
correctly.
If you want to leave the windows
partly open, you must deactivate the
volumetric alarm monitoring.









Deadlocking using the remote
control



Press the closed padlock to lock
the vehicle completely.


Press the closed padlock again
within five seconds to deadlock
the vehicle.




Deadlocking renders the exterior and
interior door controls inoperative.
It also deactivates the central locking
control button.
Therefore, never leave anyone inside
the vehicle when it is deadlocked.



Deadlocking using the key




Turn the key to the rear in the driver's door
lock to lock the vehicle completely.


Turn the key to the rear again within
five seconds to deadlock the vehicle.




Deadlocking is confirmed by fixed lighting
of the direction indicators for approximately
two seconds.
According to version, the door mirrors fold at
the same time. In low light, deadlocking also brings on the
guide-me-home lighting (see " Visibility").

Alarm *
System which protects and provides a deterrent against theft and break-ins. It provides the following types of monitoring.


- exterior perimeter

The system checks for opening of the vehicle.
The alarm is triggered if anyone tries to open a
door, the boot, the bonnet...




- interior volumetric

The system checks for any variation in the
volume in the passenger compartment.
The alarm is triggered if anyone breaks a
window, enters the passenger compartment or
moves inside the vehicle.




Locking the vehicle with full
alarm system

- tilt

The system checks for any change in the
attitude of the vehicle.
The alarm is triggered if the vehicle is lifted,
moved or knocked.




Self-protection function

The system checks for the putting out of
ser vice of its components.
The alarm is triggered if the battery, the central
control or the siren wiring are put out of service
or damaged.
For all work on the alarm system,
contact a CITROËN dealer or a
qualified workshop.


Activation




Switch off the ignition and get out of the vehicle.


Press the locking button on the remote control.
The monitoring system is active: the indicator
lamp in the button flashes once per second.
After the locking button on the remote control
is pressed, the exterior perimeter monitoring
is activated after a delay of 5 seconds and the
interior volumetric and anti-tilt monitoring after
a delay of 45 seconds.

Deactivation




Press the unlocking button on the remote
control.
The alarm system is deactivated: the indicator
lamp in the button goes off.
If an opening (door, boot...) is not
closed fully, the vehicle is not locked
but the exterior perimeter monitoring
will be activated after a delay of
45 seconds at the same time as
the interior volumetric and anti-tilt
monitoring.

*
According to country.

111Access
Deactivate the interior volumetric and anti-tilt
monitoring to avoid unwanted triggering of the
alarm in certain cases such as:


- leaving a pet in the vehicle,

- leaving a window partially open,

- washing your vehicle,

- changing a wheel,

- having your vehicle towed,

- transpor t by sea.


Locking the vehicle
with exterior perimeter
monitoring only

Deactivation of the interior
volumetric and anti-tilt
monitoring



Switch off the ignition.


Within ten seconds, press the button until
the indicator lamp is on continuously.


Get out of the vehicle.


Press the locking button on the remote
control immediately.
The exterior perimeter monitoring alone is
activated: the indicator lamp in the button
flashes once per second. To be effective, this deactivation must
be carried out each time the ignition is
switched off.


Reactivation of the interior
volumetric and anti-tilt
monitoring



Press the unlocking button on the remote
control to deactivate the exterior perimeter
monitoring.


Press the locking button on the remote
control to activate all the monitoring
functions.
The indicator lamp in the button again flashes
once per second.

1.
Driver's electric window control.


2.
Passenger's electric window control.



- manual mode




Press or pull the control gently.
The window stops when the control is
released.

- automatic mode




Press or pull the control firmly.
The window opens or closes fully when
the control is released.


Pressing the control again stops the
movement of the window.
The electric window controls remain
operational for approximately
45 seconds after the ignition is
switched off or until the vehicle is
locked after a door is opened.
If the passenger 's window cannot be
operated from the driver's door control
panel, carry out the operation from the
passenger's door control panel,
and vice versa.














Electric windows
Fitted with a safety anti-pinch system.


One-touch electric
windows
There are two options:
After approximately ten consecutive
complete opening/closing movements
of the window, a protection function is
activated which only authorises closing
of the window to prevent damage to the
electric window motor.
Once the window is closed, the controls
will become available again after
approximately 40 minutes.