2013.5 Citroen C4 AIRCROSS RHD fuel type

24
Monitoring

















Instrument panel




1.
Rev counter.

2.
Speedometer.
Screen type 2
3.
Instrument panel display screen:


- Warning and status displays.

- Total and trip distance recorders.

- Ser vice indicator.

- Coolant temperature.

- Trip computer information.

- Cruise control setting.

- Gear shift indicator recommendations.

- Settings menu (display, sound...).

- Fuel level.

- Ambient temperature.

- Transmission mode.

Panel grouping together the dials and warning/
indicator lamps. These inform the driver of the
activation/deactivation of a system or of the
occurrence of a fault.
Screen type 1

Management of the display is done using
the INFO
button located on the dashboard
to the right of the instrument panel.

48
Monitoring
The various menus may change between the type 1
instrument panel and the type 2 instrument panel.

Adjusting vehicle settings


When the vehicle is
stationary
, it allows the
user to change the following
settings:


- the reset mode
for average fuel
consumption and
average speed,

)
Press and hold the INFO
button for a few
seconds to display the menu screen.

)
In the menu screen, press the INFO
button
to select a function from the list:

- the fuel consumption units,

- the temperature display unit,

- the display language,

- activation/deactivation of the sound when
pressing the INFO
button,

- the rest reminder display inter val,

- restore the factory settings.
To change the settings, you must stop
the vehicle and switch on the ignition.
Apply the parking brake and place the
gear lever in neutral.
With the ignition on
, press the INFO
button
on the dashboard, to the right of the instrument
panel, several times in succession until the
"SETTINGS MENU" screen is displayed.


Operation


MENU
1/3
:



- 1 - 2, A - M, A - P

* (choice of the type of
reset of average fuel consumption and
average speed),

- AVG UN I T
(choice of the fuel consumption
units),

- choice of the temperature display unit
,

- LANGUAGE
(option of the display
language),


*
According to display language.
For your safety, when the vehicle is
moving
, the function settings are not
displayed when you press the INFO

button.

1
53 Monitoring
On the menu screen:


)
press the INFO
button to select "RESET"

(located in menu 2/2 or 3/3 depending
on the instrument panel)
:



Restoring factory settings
(RESET)
You can restore all of the factory settings for all
functions.

)
press and hold the INFO
button for at least
5 seconds
.
There is an audible signal and all of the factory
settings are restored for all functions.
In the menu screen:


)
press the INFO
button to select the current
fuel consumption activation / deactivation
symbol (located in menu 2/3)
:



Activation / deactivation of the
current fuel consumption *

You can activate or deactivate the display
of the current fuel consumption, with the
type 2 instrument panel only.

)
press and hold the INFO
button for a few
seconds to scroll through the choices in
succession (ON, OFF).



*
Depending on equipment.

In the menu screen:


)
press the INFO
button to select sound 1 or 2
(located in menu 2/3)
:





Selection of the sound
for the direction indicators
You can select the sound for the direction
indicators, with the type 2 instrument panel only.

216
Checks
When the symbol begins to flash
rapidly
(approximately twice per
second), there is not much fuel
remaining in your tank (approximately
5 litres).
You must fill the tank to avoid running
out of fuel.























Fuel tank



Capacity of the tank: approximately 60 litres.




Low fuel level

Filling

A label, affixed on the inside of the flap,
reminds you of the type of fuel to be used
according to your engine.
More than 5 litres of fuel must be added in
order to be registered by the fuel gauge.


Location of the cap

When the low fuel level is reached,
this indication appears in the
instrument panel screen. When it first
comes on, you have approximately
10 litres of fuel remaining.


1.
Opening the filer flap.

2.
Removing the filler cap.

3.
Hooking the filler cap.
To fill the tank safely:


)
the engine must be switched off,


)
pull the control A
located at the bottom
right of the driver's seat to release the fuel
filler flap,

)
open the fuel filler flap B
,

)
turn the filler cap C
to the left,

)
remove the filler cap C
,

)
fill the tank, but do not continue after the
3rd cut- off of the nozzle
; this could cause
malfunctions.
When you have filled the tank:


)
refit the filler cap, inserting the upper part
first,

)
screw in the filler cap to the right,

)
close the flap.
Ensure that the fuel filler flap is closed
correctly. This symbol indicates that the fuel
tank cap is located on the left-hand
side of the vehicle.
Opening the cap may cause an inrush of air.
This vacuum, which is completely normal, is
caused by the sealing of the fuel system. The symbol flashes slowly
(approximately
once per second).

217
8
Checks










Quality of the fuel used for
petrol engines

The petrol engines are per fectly compatible
with E10 or E24 type petrol biofuels
(containing 10 % or 24 % ethanol), conforming
to European standards EN 228 and EN 15376.
E85 type fuels (containing up to 85 % ethanol)
are reserved exclusively for vehicles marketed
for the use of this type of fuel (BioFlex
vehicles). The quality of the ethanol must
comply with European standard EN 15293.
For Brazil only, special vehicles are marketed
to run on fuels containing up to 100 % ethanol
(E100 type).














Quality of the fuel used for
Diesel engines

The Diesel engines are per fectly compatible
with biofuels which conform to current and
future European standards (Diesel fuel
which complies with standard EN 590 mixed
with a biofuel which complies with standard
EN 14214) available at the pumps (containing
up to 7 % Fatty Acid Methyl Ester).
The B30 biofuel can be used in certain Diesel
engines; however, this use is subject to strict
application of the special ser vicing conditions.
Contact a CITROËN dealer or a qualified
workshop.
The use of any other type of (bio)fuel
(vegetable or animal oils, pure or diluted,
domestic fuel...) is strictly prohibited (risk of
damage to the engine and fuel system).
1.6 litre petrol engines, even though they have
been designed to operate on 95 RON petrol,
can accept 90 RON petrol without engine
adjustments, but with a slight deterioration in
performance.
2.0 litre petrol engines can accept 90 RON or
higher petrol.

9
225
Te c h n i c a l d a t a

*
The maximum power corresponds to the value type-approved on a test bed, under conditions defined in European legislation (Directive 1999/99/EC).















Engines and gearboxes


.../S
: model fitted with the Stop & Start (AS&G) function.
PETROL ENGINES


1.6 litre 115



2.0 litre 150



Model codes :
BU
...

NKZ7

NKZ7/S

NKZ0

NKZ0/S



AFYR

AFZ7



AFYV
AFZM



AFYT
AFZH



AFYW
AFZP



Tr a n s m i s s i o n m o d e


2WD



2WD



4WD



2WD



4WD


Cubic capacity (cc)
1 590
1 998
Bore x stroke (mm)
75 x 90
86 x 86
Max power * : EU standard (kW)
86
113
Max power engine speed (rpm)
6 000
6 000
Max torque: EU standard (Nm)
15 4
19 9
Max torque engine speed (rpm)
4 000
4 200
Fuel
Unleaded
Unleaded
Catalytic conver ter
Ye s
Ye s

GEARBOXES

Manual
(5-speed)
Manual
(5-speed)
CVT
(6-speed)

OIL CAPACITY (in litres)











Engine (with filter replacement)
4.2
4.3

232
Te c h n i c a l d a t a

*
The maximum power corresponds to the value type-approved on a test bed, under conditions defined in European legislation (Directive 1999/99/EC).
DIESEL ENGINES


1.6 HDi 110



1.8 HDi 150



Model codes :
BU...


9HD8/S



9HDB/S



6HZ8/S



6HZB

6HZB/S



Tr a n s m i s s i o n m o d e


2WD



4WD



2WD



4WD


Cubic capacity (cc)
1 560
1 798
Bore x stroke (mm)
77 x 88.3
83 x 83.1
Max power * : EU standard (kW)
84
11 0
Max power engine speed (rpm)
3 600
4 000
Max torque: EU standard (Nm)
270
300
Max torque engine speed (rpm)
1 750
2 000 to 3 000
Fuel
Diesel
Diesel
Catalytic conver ter
Ye s
Ye s
Particle emission filter (PEF)
Ye s
Ye s

GEARBOXES

Manual
(6-speed)
Manual
(6-speed)

OIL CAPACITY (in litres)









Engine (with filter replacement)
3.75
5.3














Engines and gearboxes


.../S
: model fitted with the Stop & Start (AS&G) function.

9
241
Te c h n i c a l d a t a




















Identifi cation markings
Various visible markings for the identification and tracing of your vehicle.



A.
Manufacturer's plate.

It is riveted to the middle pillar, right hand
side and carries the following information:


- the name of the manufacturer,

- the European whole vehicle type
approval number,

- the vehicle identification number (VIN),

- the maximum authorised vehicle weight
(gross vehicle weight),

- the maximum authorised weight of
vehicle + trailer (gross train weight),

- the maximum front axle weight,

- the maximum rear axle weight.
The tyre pressures must be checked
when the tyres are cold, at least once
a month.

If the tyre pressures are too low, this
increases fuel consumption.

B.
Ty r e l a b e l .

It is fixed to the middle pillar, driver's side
and carries the following information:


- the tyre sizes,

- the tyre pressures.
D.
Vehicle identification number (VIN) at
the bottom of the windscreen aper ture.

It is marked on a label visible through the
windscreen, left hand side.


C.
Vehicle identification number (VIN)
under the bonnet.

This number is engraved on the body near
the damper support.