7-12
FUEL INJECTION SYSTEM
D36 Injectors ActuationCheck that power is supplied to
the fuel injector.
• Check the fuel injector operation
by listening for the operating
sound or by confirming the oper-
ation visually.Actuates the injector for five times
every second.
The "WARNING" LED on the FI di-
agnostic tool comes on each time
the fuel injector is actuated.
D60EEPROM fault code
display.DisplayDisplays the abnormal portion of
the data in the EEPROM that has
been detected as a fault code No.
44.
If code numbers more than one
are detected, the display alter-
nates every two seconds to show
all the detected code numbers.
When all code numbers are
shown, the display repeats the
same process.00: No fault
01: CO adjustment valve
07: Power Tuner adjustment val-
ues 0–8 for fuel injection amount or
ignition timing
D61Malfunction history
code display.DisplayDisplays the fault code numbers
that are stored in the malfunction
history.
If code numbers more than one
are detected, the display alter-
nates every two seconds to show
all the detected code numbers.
When all code numbers are
shown, the display repeats the
same process.00: No history
12–50: History exists
• Refer to the fault code number.
D62Malfunction history
code erasureActuation
and displayDisplays the total number of mal-
functions, including the current
malfunction, that have occurred
since the history was last erased.
In addition, deletes the fault code
numbers from the history if the cor-
responding items are currently op-
erating normally.00: No history
1–15: History exists
When this diagnostic code number
is selected, fault code numbers for
previously detected malfunctions
are deleted from the history if the
corresponding items are currently
operating normally.
D64 Setting history display DisplayDisplays whether or not history ex-
ists for settings that were made us-
ing the Power Tuner.00: There is no setting history.
01: There is setting history.
02: Whether or not setting history
data exists cannot be determined
(damage to history data).
D65 Setting map erasure DisplayErases the settings that were
made using the Power Tuner.00: There are no settings that were
made using the Power Tuner.
01: There are settings that were
made using the Power Tuner.
D70Program version
numberDisplayCheck the version number of the
program.0–254 Diagnos-
tic code
No.ItemActuation or
displayChecking methodActuation or LCD standard display
values
