MOTORCYCLE CARE AND STORAGE
8-1
1
2
3
4
5
\f
7
8
9
1\b
EAU26004
Care
While the ope\f desig\f o\b a motorcycle
reveals the attractive\fess o\b the tech-
\fology, it also makes it more vul\fera-
ble. Rust a\fd corrosio\f ca\f develop
eve\f i\b high-quality compo\fe\fts are
used. A rusty exhaust pipe may go u\f-
\foticed o\f a car, however, it detracts
\brom the overall appeara\fce o\b a mo-
torcycle. Freque\ft a\fd proper care
does \fot o\fly comply with the terms o\b
the warra\fty, but it will also keep your
motorcycle looki\fg good, exte\fd its
li\be a\fd optimize its per\borma\fce.
Before cleaning 1. Cover the mu\b\bler outlet with a plastic bag a\bter the e\fgi\fe has
cooled dow\f.
2. Make sure that all caps a\fd cov- ers as well as all electrical cou-
plers a\fd co\f\fectors, i\fcludi\fg
the spark plug cap, are tightly i\f-
stalled. 3. Remove extremely stubbor\f dirt,
like oil bur\ft o\fto the cra\fkcase,
with a degreasi\fg age\ft a\fd a
brush, but \fever apply such prod-
ucts o\fto seals, gaskets, sprockets,
the drive chai\f a\fd wheel axles. Al-
ways ri\fse the dirt a\fd degreaser
o\b\b with water.
Cleaning
ECA10772
NOTICE
●Avoid using strong acidic
wheel cleaners, especially on
spoked wheels. If such prod-
ucts are used on hard-to-re-
move dirt, do not leave the
cleaner on the affected area
any longer than instructed. Al-
so, thoroughly rinse the area
off with water, immediately dry
it, and then apply a corrosion
protection spray.
●Improper cleaning can damage
plastic parts (such as cowlings,
panels, windshields, headlight
lenses, meter lenses, etc.) and
the mufflers. Use only a soft,
clean cloth or sponge with wa- ter to clean plastic. However, if
the plastic parts cannot be
thoroughly cleaned with water,
diluted mild detergent with wa-
ter may be used. Be sure to
rinse off any detergent residue
using plenty of water, as it is
harmful to plastic p\5arts.
●Do not use any harsh chemical
products on plastic parts. Be
sure to avoid using cloths or
sponges which have been in
contact with strong or abrasive
cleaning products, solvent or
thinner, fuel (gasoline), rust re-
movers or inhibitors, brake flu-
id, antifreeze or electrolyte.
●Do not use high-pressure
washers or steam-jet cleaners
since they cause water seep-
age and deterioration in the fol-
lowing areas: seals (of wheel
and swingarm bearings, fork
and brakes), electric compo-
nents (couplers, connectors,
instruments, switches and
lights), breather hoses and
vents.
XT660Z 08-10 ING-AUS:MY03 07-10 ING 11-05-2009 10:10 Pagina 2
MOTORCYCLE CARE AND STORAGE
8-3
1
2
3
4
5
\f
7
8
9
1\b
8. Let the motorcycle dry completely before \ftoring or co\bering it.
EWA11131
WARNING0
Contaminants on the brakes or
tires can cause loss \5of control.
●Make sure that there is no oil or
wax on the brakes \5or tires.
●If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or
acetone, and wash the tires
with warm water and a mild de-
tergent. Before riding at higher
speeds, test the motorcycle's
braking performance and cor-
nering behavior.
ECA10800
NOTICE
●Apply spray oil and wax spar-
ingly and make sure to wipe off
any excess
●Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.
●Avoid using abrasive polishing
compounds as they will wear
away the paint.
TIP
●Con\fult a Yamaha dealer for ad-
\bice on what product\f\f to u\fe.
●Wa\fhing, rainy weather or humid
climate\f can cau\fe the headlight
len\f to fog. Turning the headlight
on for a \fhort period of time will
help remo\be the moi\fture from
the len\f.
EAUM1901
Storage
Short-term
Alway\f \ftore your motorcycle in a cool,
dry place and, if nece\f\fary, protect it
again\ft du\ft with a porou\f co\ber.
ECA10810
NOTICE
●Storing the motorcycle in a
poorly ventilated room or cov-
ering it with a tarp, while it is
still wet, will allow water and
humidity to seep in and cause
rust.
●To prevent corrosion, avoid
damp cellars, stables (because
of the presence of ammonia)
and areas where strong chemi-
cals are stored.
XT660Z 08-10 ING-AUS:MY03 07-10 ING 11-05-2009 10:10 Pagina 4
