2012 YAMAHA XENTER 150 service

1
2
3
4
5
6
7
8
9
3-14
EAU1044E
INSTRUMENT AND CONTROL FUNCTIONS● Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.● Do not dispose of a damaged
or worn-out shock absorber
assembly yourself. Take the
shock absorber assembly to a
Yamaha dealer for any service.
EAU15112
Carrier
1
1. Carrier
EWA10171
WARNING
● Do not exceed the load limit of
5 kg (11 lb) for the carrier.● Do not exceed the maximum
load of 179 kg (395 lb) for the
vehicle.
EAUT3480
Luggage holder
1
1. Luggage holderPull the luggage holder outward, then
move the top portion of the luggage
holder as shown in order to hook
items on it.
EWAT1090
WARNING
● Do not exceed the load limit
of 3 kg (7 lb) for the luggage
holder.● Do not exceed the maximum
load of 179 kg (395 lb) for the
vehicle.
52S-F8199-E0_CS.indd 3-1452S-F8199-E0_CS.indd 3-14
2011/11/16 13:07:002011/11/16 13:07:00
Process BlackProcess Black

1
2
3
4
5
6
7
8
9
6-1
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
EAUS1823
Periodic inspection, adjustment, and
lubrication will keep your vehicle in
the safest and most effi cient condition
possible. Safety is an obligation of
the vehicle owner/operator. The most
important points of vehicle inspection,
adjustment, and lubrication are ex-
plained on the following pages.
The intervals given in the periodic
maintenance charts should be simply
considered as a general guide under
normal riding conditions. However,
depending on the weather, terrain,
geographical location, and individual
use, the maintenance intervals may
need to be shortened.
EWA10321
WARNING
Failure to properly maintain the
vehicle or performing maintenance
activities incorrectly may increase
your risk of injury or death during
service or while using the vehicle.
If you are not familiar with vehicle
service, have a Yamaha dealer per-
form service.
EWA15122
WARNING
Turn off the engine when perform-
ing maintenance unless otherwise
speci ed.● A running engine has moving
parts that can catch on body
parts or clothing and electrical
parts that can cause shocks or
res.● Running the engine while ser-
vicing can lead to eye injury,
burns, fire, or carbon monox-
ide poisoning - possibly lead-
ing to death. See page 1-2 for
more information about carbon
monoxide.
EWA10330
WARNING
This scooter is designed for use
on paved roads only. If this scooter
is operated in abnormally dusty,
muddy or wet conditions, the air
lter element should be cleaned or
replaced more frequently, other-
wise rapid engine wear may result.
Consult a Yamaha dealer for proper
maintenance intervals.
EWA15460
WARNING
Brake discs, calipers, drums, and
linings can become very hot dur-
ing use. To avoid possible burns,
let brake components cool before
touching them.
52S-F8199-E0_CS.indd 6-152S-F8199-E0_CS.indd 6-1
2011/11/16 13:07:002011/11/16 13:07:00
Process BlackProcess Black

1
2
3
4
5
6
7
8
9
6-2
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU17521
Owner’s tool kit
1
1. Owner’s tool kitThe owner’s tool kit is located inside
the storage compartment under the
seat. (See page 3-11.)
The service information included in
this manual and the tools provided in
the owner’s tool kit are intended to as-
sist you in the performance of preven-
tive maintenance and minor repairs.
However, additional tools such as a
torque wrench may be necessary to
perform certain maintenance work
correctly.TIPIf you do not have the tools or expe-
rience required for a particular job,
have a Yamaha dealer perform it for
you.
52S-F8199-E0_CS.indd 6-252S-F8199-E0_CS.indd 6-2
2011/11/16 13:07:012011/11/16 13:07:01
Process BlackProcess Black

1
2
3
4
5
6
7
8
9
6-6
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENT
EAUT2710
TIP● Air fi lter and V-belt fi lter
• This model’s air fi lter is equipped with a disposable oil-coated paper element, which must not be cleaned with
compressed air to avoid damaging it.
• The air fi lter element needs to be replaced and V-belt fi lter needs to be serviced more frequently when riding in
unusually wet or dusty areas.● Hydraulic brake service
• After disassembling the brake master cylinder and caliper, always change the fl uid. Regularly check the brake
fl uid level and fi ll the reservoir as required.
• Every two years replace the internal components of the brake master cylinder and caliper, and change the brake
fl uid.
• Replace the brake hose every four years and if cracked or damaged.NO. ITEM CHECK OR MAINTENANCE JOBODOMETER READING
ANNUAL
CHECK
1000 km
(600 mi)6000 km
(3500 mi)
12000 km
(7000 mi)18000 km
(10500 mi)24000 km
(14000 mi)
23Moving parts and ca-
bles• Lubricate.
√√√√ √
24 * Throttle grip• Check operation.
• Check throttle grip free play, and adjust if necessary.
• Lubricate cable and grip housing.√√√√ √
25 *Lights, signals and
switches• Check operation.
• Adjust headlight beam.√√√√√ √
52S-F8199-E0_CS.indd 6-652S-F8199-E0_CS.indd 6-6
2011/11/16 13:07:012011/11/16 13:07:01
Process BlackProcess Black

1
2
3
4
5
6
7
8
9
6-32
EAU1722A
PERIODIC MAINTENANCE AND ADJUSTMENTare no open flames or sparks in
the area, including pilot lights from
water heaters or furnaces. Gasoline
or gasoline vapors can ignite or
explode, causing severe injury or
property damage.
EAU25881
TroubleshootingAlthough Yamaha scooters receive a
thorough inspection before shipment
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your scooter
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the scooter prop-
erly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
EWA15141
WARNING
When checking the fuel system, do
not smoke, and make sure there
52S-F8199-E0_CS.indd 6-3252S-F8199-E0_CS.indd 6-32
2011/11/16 13:07:022011/11/16 13:07:02
Process BlackProcess Black

1
2
3
4
5
6
7
8
9
8-1
SPECIFICATIONS SPECIFICATIONS
EAU50910
DimensionsOverall length
1990 mm (78.3 in)
Overall width
690 mm (27.2 in)
Overall height
1135 mm (44.7 in)
Seat height
785 mm (30.9 in)
Wheelbase
1385 mm (54.5 in)
Ground clearance
140 mm (5.51 in)
Minimum turning radius
2100 mm (82.7 in)WeightCurb weight
142 kg (313 lb)EngineEngine type
Liquid cooled 4-stroke, SOHC
Cylinder arrangement
Single cylinder
Displacement
155 cm
3
Bore x stroke
58.0 x 58.7 mm (2.28 x 2.31 in)
Compression ratio
11.00 : 1
Starting system
Electric starter
Lubrication system
Wet sump
Engine oilRecommended brand
YAMALUBE
Type
SAE 10W-40, 10W-50, 15W-40, 20W-40
or 20W-50
–20 –10 0
1020 30 40 50 ˚C 10 30 50 70 90 110 0 130 ˚F
SAE 20W-50SAE 20W-40SAE 15W-40SAE 10W-40SAE 10W-50
Recommended engine oil grade
API service SG type or higher, JASO
standard MAEngine oil quantityPeriodic oil change
1.10 L (1.16 US qt, 0.97 Imp.qt)Final transmission oilType
SAE 10W-30 type SE motor oil
Quantity
0.20 L (0.21 US qt, 0.18 Imp.qt)Cooling systemCoolant reservoir capacity
(up to the maximum level mark)
0.25 L (0.26 US qt, 0.22 Imp.qt)
Air lterAir fi lter element
Oil-coated paper elementFuelRecommended fuel
Regular unleaded gasoline only
Fuel tank capacity
8.0 L (2.11 US gal, 1.76 Imp.gal)Throttle bodyID mark
52S1 01
Manufacturer
AISANSpark plug(s)Manufacturer/model
NGK / CPR9EA-9
Spark plug gap
0.8-0.9 mm (0.031-0.035 in)ClutchClutch type
Dry, centrifugal automaticTransmissionPrimary reduction ratio
1.000
Secondary reduction ratio
10.320 (46 / 13 x 35 / 12)
Final drive
Gear
Transmission type
V-belt automaticChassisFrame type
Underbone
52S-F8199-E0_CS.indd 8-152S-F8199-E0_CS.indd 8-1
2011/11/16 13:07:022011/11/16 13:07:02
Process BlackProcess Black