4-23
4Shock absorber cylinder damage could also
result in poor handling which could cause an
accident.
Do not tamper with or attempt to open the
cylinder assembly.Do not subject the shock absorber assembly
to an open flame or other high heat.Do not deform or damage the cylinder in any
way.Do not dispose of a damaged or worn out
shock absorber assembly yourself. Take the
shock absorber assembly to a Yamaha deal-
er for any service.EBU19183Auxiliary DC jack The auxiliary DC jack is located at the front right
side of the ATV. The auxiliary DC jack can be used
for suitable work lights, radios, etc. The auxiliary
DC jack should only be used when the engine is
running and the light switch is set to
“OFF ”.
1. Set the light switch to “ OFF”.
2. Turn the accessory off.
3. Start the engine. (See page 6-1.)
4. Open the auxiliary DC jack cap, and then in- sert the accessory power plug into the jack.
1. Auxiliary DC jack cap
1. Auxiliary DC jack
U1HS60E0.book Page 23 Tuesday, April 26, 2011 7:53 PM
