4-5
4
EBU18037Multi-function display The multi-function display is equipped with the fol-
lowing:a speedometeran odometertwo tripmeters (which show the distance trav-
eled since they were last set to zero)a clock
an hour meter (which shows the total time the
key has been turned to “ON ”)
Odometer and tripmeter modes
Pushing the “ TRIP/ODO” button switches the dis-
play between the odometer mode “ ODO” and the
tripmeter modes “TRIP A ” and “ TRIP B ” in the fol-
lowing order:
ODO → TRIP A → TRIP B → ODO
To reset a tripmeter, select it by pushing the
“ TRIP/ODO ” button, and then push the
“ TRIP/ODO ” button for at least three seconds. The
tripmeters can be used to estimate the distance
that can be traveled with a full tank of fuel. This in-
formation will enable you to plan future fuel stops.TIPPushing and holding in the “TRIP/ODO ” button,
and turning the key to “ON ” while the button is
pushed, switches the display between “mph” and
“ km/h ”.Clock mode
Pushing the “/” button switches the display
between the clock mode “ CLOCK” and the hour
meter mode “ HOUR” in the following order:
CLOCK → HOUR → CLOCK
1. Speedometer
2. “H” button
3. “M” button
4. Clock/Hour meter
5. Odometer/Tripmeter A/Tripmeter B
6. “TRIP/ODO ” button
7. Clock/Hour “/” buttonU1CT61E0.book Page 5 Wednesday, April 20, 2011 6:36 PM
