2012 YAMAHA GRIZZLY 350 belt

[x] Cancel search: belt

Page 9 of 142

YAMAHA GRIZZLY 350 2012  Owners Manual Starting a warm engine  .............................. 6-3
Operating the drive select lever and driving in reverse  ...................................... 6-3
Engine break-in  ........................

Page 24 of 142

YAMAHA GRIZZLY 350 2012  Owners Manual 3-1
3
EBU17680
DESCRIPTION 
EBU17690Left view
EBU17700Right view
1. Fuel cock
2. Throttle stop screw
3. Air filter case
4. Fuses
5. Battery
6. Tail/brake light
7. Engine oil filler cap
8. Oil filter c

Page 76 of 142

YAMAHA GRIZZLY 350 2012  Owners Manual 7-19
7The ATV can be used to cross slow moving, shal-
low water of up to a maximum of 35 cm (14 in) in
depth. Before entering the water, choose your path
carefully. Enter where there is no sharp drop

Page 77 of 142

YAMAHA GRIZZLY 350 2012  Owners Manual 7-20
7
1. Air filter case check hose
1. V-belt cooling duct check hose (left front side of ATV)
1. Storage compartment check hose
1. V-belt case drain plug
U1NS60E0.book  Page 20  Monday, August 1, 20

Page 104 of 142

YAMAHA GRIZZLY 350 2012  Owners Manual 8-24
8
WARNING
EWB02340Do not start the engine when cleaning the
spark arrester, otherwise it could cause injury
to the eyes, burns, carbon monoxide poison-
ing, possibly leading to death, and start a

Page 133 of 142

YAMAHA GRIZZLY 350 2012  Owners Manual 10-2
10
Type:SAE 5W-30, 10W-30, 10W-40, 15W-40, 20W-40 or 20W-
50
Recommended engine oil grade: API service SG type or higher, JASO standard MA
Engine oil quantity: Without oil filter cartridge replac

Page 134 of 142

YAMAHA GRIZZLY 350 2012  Owners Manual 10-3
10
Secondary reduction system:Shaft drive
Secondary reduction ratio: 41/21  × 24/18  × 33/9 (9.545)
Transmission type:
V-belt automatic
Operation: Left hand operation
Forward gear: 35/20 (1.750

Page 140 of 142

YAMAHA GRIZZLY 350 2012  Owners Manual Light switch  .................................................................... 4-4MMain switch  .................................................................... 4-1
Maintenance and lubrication