2012 TOYOTA xD display

17
17

1 DISCSwitches to the CD mode. (Only effective if a disc is loaded.)
2 h (EJECT)Press to eject the disc.
3 LISTPress to display a CD List.Use the ROTARY ENCODER to select a CD from the list.
4 ROTARY ENCODER (SELECT
LIST)Turn the ROTARY ENCODER clock-wise or counterclockwise to select the desired title. Press the ROTARY ENCODER in the center to start play-back.
• No CD List is displayed when play-ing back a CD containing no text information.
5 UP/DOWN (SELECT LIST)Press to select the desired title.
6 RIGHT (TRACK )Press to proceed to the next track. Press and hold until you hear a beep. Playing of the track is fast forwarded. ( There is sound.)
7 LEFT (TRACK )Press to takes you back to the start of the track currently playing. Press to return to the previous track once more.Press and hold until you hear a beep. Playing of the track is reversed. ( There is sound.)
8 PRESET1 (PLAY/PAUSE)To pause the CD, press PRESET 1 while the CD is playing. Press again to resume playing.
9 PRESET5 (Random)If you press this, and is indicated in the display. This unit starts to play tracks on the disc being played in random order. Press again to cancel.
a PRESET6 (Repeat)If you press this, and is indi-cated in the display. This unit starts to repeat the track being played. Press again to cancel.
b SCANIf you press this, and is indi-cated in the display. This unit starts to play the first 10 seconds of each track on the CD being played. Press again to cancel.
c TEXTPress, and display indications change as follows ( TEX T CD only):
Upper: Artist NameLower: Track Title Track TitleELAPSED TIME
Disc Title Track Title
When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis-played.
CAUTION
Compact disc players use an
invisible laser beam which
could cause hazardous radiation
exposure if directed outside
the unit. Be sure to operate the
player correctly.

18
18

Listening to MP3/
WMA/AAC DISC
1 DISCSwitches to the DISC mode. (Only effective if a disc is loaded.)
2 h (EJECT)Press to eject the disc.
3 LISTPress to display an MP3/ WMA /A AC List.Use the ROTARY ENCODER to select an item from the list.
4 ROTARY ENCODER (SELECT
LIST)Turn the ROTARY ENCODER clock-wise or counterclockwise to select a file or folder. Press the ROTARY ENCODER in the center to play the selected file or folder. Use the ROTARY ENCODER to select an item from the list. ( When a folder is selected, the first track in the folder is played.)
The MP3/ WMA /A AC List is dis-played when the top folder in the root directory or the file or folder name is selected.

19
19

5 RIGHT (TRACK )Press to proceed to the next file. Press and hold until you hear a beep. Playing of the file is fast forwarded. ( There is no sound.)
6 LEFT (TRACK )Press to takes you back to the start of the file currently playing. Press to return to the previous file once more. Press and hold until you hear a beep. Playing of the file is reversed. ( There is no sound.)
7 UP (FOLDER )Press to proceed to the next folder.
8 DOWN (FOLDER )Press to return to the previous folder. Press and hold until you hear a beep to jump to HOME. HOME means returning back to play the first file in the first folder on the CD being played.
9 PRESET1 (PLAY/PAUSE)To pause the track, press PRESET
1 while the track is playing. Press again to resume playing.
a PRESET5 (Random)If you press this, and is indi-cated in the display. This unit starts to play files in the folder being played in random order. Press again to can-cel.If you press and hold until you hear a beep, and is indicated in the display. This unit starts to play files in all folders on the disc being played in random order. Press again to cancel.
b PRESET 6 (Repeat)If you press this, and is indi-
cated in the display. This unit starts to repeat the file being played. Press again to cancel.If you press and hold until you hear a beep, and is indicated in the display. This unit starts to repeat the folder being played. Press again to cancel.
c SCANIf you press this, and is indi-cated in the display. This unit starts to play the first 10 seconds of each file in the folder being played. Press again to cancel.If you press and hold until you hear a beep, and is indicated in the display. This unit starts to play the first 10 seconds of the first file of each folder. Press again to cancel.
d TEXTPress and display indications change as follows:
Upper: Artist NameLower: Track Title Track TitleELAPSED TIME
Folder Name File Name
When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis-played.

1
1

About iPod software version
The iPod sof tware versions that
can be used with this unit are as
follows (operations verified as of
October  010):
iPod (5th generation)ver. 1.3
iPod classicver. 2.0
iPod classic 120 GBver. 2.0.1
iPod classic 160 GBver. 2.0.4
iPod nano (1st generation)ver. 1.3.1
iPod nano (2nd generation)ver. 1.1.3
iPod nano (3rd generation)ver. 1.1.3
iPod nano (4th generation)ver. 1.0.4
iPod nano (5th generation)ver. 1.0.1
iPod nano (6th generation)ver. 1.0
iPod touch (1st generation)iOS3.0
iPod touch (2nd generation)iOS3.0
iPod touch (3rd generation)iOS3.1.1
iPod touch (4th generation)iOS4.1
iPhoneiOS3.1.2
iPhone 3GiOS3.0
iPhone 3GSiOS3.0.1
iPhone 4iOS4.1
* Please note that no guarantee applies to iPod
operations and future updated versions of iPod
software.
Connecting the iPod
Connect the USB connector.
Connect the iPod as indicated
in the figure below using a USB
cable.
Push the Dock connector into the
Dock connector port until you
hear a click to connect firmly. If it
does not go in smoothly, it may be
upside down so do not force it in as
this may result in damage.
To the vehicle's USB connector *2
*1
USB port
iPod with Dock connector port
Dock connector
When connecting the iPod, remove
a headphone cable from the iPod.
When connecting the iPod, it is
recommended to use a separately
purchased car kit.
*1
It is recommended to use a USB cable which
satisfies USB 2.0 standards.
(Measurements should satisfy USB 2.0 standards)
*2
Connection location differs depending on the
vehicle.
Vehicle
type
Connection location
tCConnect to the USB connector
near the shift knob.
xBConnect to the USB connector
near the parking brake.
xDConnect to the USB connector
near the cup holder.
iQConnect to the USB connector
near the shift knob.
As soon as the iPod is connected, its
power is automatically turned on.
While the iPod is connected to this
unit, the Apple logo (or (check
mark)) is displayed on the iPod.
While the iPod is connected to
this unit, the iPod itself cannot be
turned on or of f.
You cannot use the iPod's
remotecontrol at the same time.
You may hear noise if you
disconnect during iPod playback.
•
•
•

4
4

Listening to songs on
the iPod
1 iPod•USBPress the button repeatedly until the source becomes iPod.
NOTICE
If an iPod is not connected, it
will not switch to iPod even if
you press the iPod•USB button.
2 LISTPress the LIST button to display the category list (Playlist is the first cat-egory displayed). Use the ROTARY ENCODER to change or select the category.
3 ROTARY ENCODER (SELECT
LIST)Turning the ROTARY ENCODER while the list is displayed switches
the categories in the following order. Press the ROTARY ENCODER in the center to select.Playlist  Artists  Albums  Songs  Podcasts  GENRES  Composers  Audio BookTurn the ROTARY ENCODER to select an item from the selected category, and press the ROTARY ENCODER in the center to select.

5
5

4 RIGHT (TRACK ,
CHAPTER)Press to proceed to the next track or chapter. Press and hold to the right until you hear a beep. Playing of the track is fast forwarded.
5 LEFT (TRACK ,
CHAPTER )Press to takes you back to the begin-ning of the track currently playing or previous chapter.
Press to return to the previous track or chapter once more.Press and hold until you hear a beep. Playing of the track is reversed.
6 PRESET1 (PLAY/PAUSE)To pause the track, press PRESET 1 while the track is playing. Press again to resume playing.
7 PRESET5 (Random)If you press this, is indicated in the display. This unit starts to play tracks on the iPod being played in random order.Pressing PRESET5 repeatedly switches between the contents of random and Off.The random changes as follows:Track Shuffle  Album Shuffle  Off Press and hold PRESET5 to set Shuffle all.
8 PRESET6 (Repeat)
If you press this, and is indi-cated in the display. This unit starts to repeat the track being played. Press again to cancel.
9 TEXTText information recorded on the iPod can be displayed.Up to 16 characters can be displayed at once.Press and display indications change as follows:
Upper: Artist NameLower: Song Title Song TitleELAPSED TIME
Album Title Song Title
When d is displayed, if you press and hold until you hear a beep, the display will changes. A maximum of 2 pages (24 characters) can be dis-played.
NOTICE
You cannot use the iPod’s
remote control at the same
time.
You may hear noise if you
disconnect during iPod
playback.
The SCAN operation is not
available when listening to
the iPod.
•
•
•

6
6

ABC SEARCH on an iPod
You can search for an item in the
list displayed on the iPod by the
first character (alphanumeric char-
acters only).
1 Press the LIST button. While the
list is displayed, press the LIST
button again.
ABC SEARCH is enabled.

2 Turn the ROTARY ENCODER
to select a letter or numeral.
For example, turn the ROTARY
ENCODER right to select “B”.

3 Press the ROTARY ENCODER.
The search starts and the first
item in the list that starts with
“B” is displayed.

If the list does not contain any
items starting with the selected
character, [NOT FOUND] is
displayed and ABC SEARCH is
canceled.
4 Turn the ROTARY ENCODER to
select the desired track.
Scroll down the list.

5 When the track you want to listen
to is displayed in the center of
the display, press the ROTARY
ENCODER in the center. The
selected track is played.
* To cancel ABC SEARCH,
press the LIST button.

31
31

How to subscribe to
XM Satellite Radio

NOTICE
All fees and programming are
the responsibility of XM Satellite
Radio and are subject to change.
Listeners can subscribe by visiting
XM on the Web at
w w w.xmradio.com or by calling
XM’s Listener Care toll-free at
(800)85-9696.
Customers should have their Radio
ID ready.
Display the RADIO ID
Each XM tuner is identified with a
unique Radio ID. You will need the
Radio ID when activating XM serv-
ice or when reporting a problem.
How to display RADIO ID
Select the Channel Number zero (000)
by turning the ROTARY ENCODER or
pressing it to the left or right.
The ID Code is displayed.
The RADIO ID is displayed as 8
alphanumeric characters.
(Refer to page 32 to check your radio
ID code)
Record your ID Code below
ID CODE ___ ___ ___ ___ ___ ___ ___ ___
NOTICE
If you select another Channel,
display of the ID Code is
canceled.