2012 TOYOTA xB child seat

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
1
INDEX
OVERVIEW
FEATURES/OPERATIONS
SAFETY AND
EMERGENCY FEATURES
Engine maintenance 7Fuel tank door release and cap7Hood release 6Indicator symbols4-5Instrument cluster 4Instrument panel2-3Keyless entry16
Light control-Instrument panel 6
Air Conditioning/Heating12Auto lock/unlock28Automatic Transmission 8Bottle holders13Cruise control 11Lights & turn signals10Multi-information display14Parking brake 8Power outlet14Seat adjustments-Front 9Seat-Folding down rear seat9Seats-Head restraints9Steering wheel switches13Tilt steering wheel 12AUX port/USB port 13Windows 11
Windshield wipers & washers 10
Brake override 19Door locks 15Doors-Child safety locks15Floor mat installation19Seat belts16Seat belts-Shoulder belt anchor15Spare tire & tools 17STAR Safety SystemTM18
Tire Pressure Monitoring (warning) System 16
2012-Scion-xB-QRG.qxd:4118_ 4/7/11 10:34 PM Page 1

OVERVIEW
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
15
e.
SAFETY AND EMERGENCY FEATURES
Doors-Child safety locks
Moving the lever to “LOCK” will allow the door to be opened only f\
rom the outside.
Rear door
Door locks
Unlock
Lock
Seat belts-Shoulder belt anchor
Push up to raisePull lock release to lower
2012-Scion-xB-QRG.qxd:4118_ 4/7/11 10:43 PM Page 15

16
SAFETY AND EMERGENCY FEATURES
If belt is fully extended, then retracted even slightly, it cannot be re-extended
beyond that point, unless fully retracted again. This feature is used to help hold
child restraint systems securely.
To find more information about seat belts, and how to install a child res\
traint
system, refer to the Owner’s Manual.
Keep as low on
hips as possible
Take up slack
Too high
Seat beltsSp
To o
Rem
(1) R
(2) R
(3) L
Refe
If tire pressure indicator is on, check/adjust each tire.
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or repl\
aced, turn
the ignition switch to “ON” and press and hold the “ SET” button until indicator
blinks three times. Let the vehicle sit for a few minutes to allow initi\
alization to
complete.
Refer to the load label on the door jamb or the Owner’s Manualfor tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then\
remains
on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes in
tire pressure from natural air leakage. If the system has not been initi\
alized
recently, setting the tire pressures to factory specifications should turn off t\
he
light.
(1
2012-Scion-xB-QRG.qxd:4118_ 4/7/11 10:42 PM Page 16