2012 TOYOTA VERSO S low beam

203 2-2. Instrument cluster
2
When driving
VERSO-S_EE
Indicators
The indicators inform the driver of the operating state of the
vehicle’s various systems.
Turn signal indicator
(P. 194)Low engine coolant
temperature indicator
Headlight high beam
indicator (P. 211)
(Vehicles with
a manual
transmission)
Gear Shift Indicator
(P. 192)
(If equipped)
Tail light indicator
(P. 210)
(Diesel engine)
Engine preheating
indicator (P. 166, 176)
(If equipped)
Front fog light indicator
(P. 216)
(If equipped)
VSC OFF indicator
(P. 234)
Rear fog light indicator
(P. 216)
(If equipped)
“TRC OFF” indicator
(P. 234)
(If equipped)
Smart entry & start sys-
tem indicator (P. 166)
(Vehicles with
a Multidrive)
“SPORT” indicator
(P. 181)
(If equipped)
Stop & Start indicator
(P. 226)
(If equipped)
Slip indicator
(P. 234)
Engine immobilizer/
alarm system indicator
(P. 97)
*3
*1
*1
*1
*1*1, 2

211 2-3. Operating the lights and wipers
2
When driving
VERSO-S_EE
Turning on the high beam headlights
With the headlights on, push
the lever away from you to
turn on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams
with the headlights on or off.
Manual headlight leveling dial
The level of the headlights can be adjusted according to the number
of passengers and the loading condition of the vehicle.
Left-hand drive vehicles
Raises the level of the head-
lights
Lowers the level of the head-
lights

215 2-3. Operating the lights and wipers
2
When driving
VERSO-S_EE
Turning on the low beam headlights when the vehicle is parked in dark
areas
Customization that can be configured at any authorized Toyota dealer
or repairer, or another duly qualified and equipped professional
Settings (e.g. light sensor sensitivity) can be changed.
(Customizable features P. 518)
NOTICE
To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not run-
ning.
Turn off the engine with the light switch
in or off, and pull the light switch
toward you and release it. The low
beam headlights will turn on for about
30 seconds to light up the area around
the vehicle.
The lights are turned off in the following
situations.
Vehicles without a smart entry &
start system: The engine switch is
turned to the “ON” position.
Vehicles with a smart entry & start
system: The “ENGINE START
STOP” switch is turned to IGNITION
ON mode.
The light switch is turned on.
The light switch is pulled toward you
and then released.

285 3-2. Using the audio system
3
Interior features
VERSO-S_EE
CD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected while the CD player is being used.
If a CD is left inside the CD player or in the ejected position for
extended periods
The CD may be damaged and may not play properly.
Lens cleaners
Do not use lens cleaners. Doing so may damage the CD player.
CAUTION
Certification for the CD player
This product is a class I laser product.
A laser beam leak may result in hazardous radiation exposure.
Do not open the cover of the player or attempt to repair the unit yourself.
Refer servicing to qualified personnel.
Laser power: No hazardous
NOTICE
CDs and adapters that cannot be used
Do not use the following types of CDs or 8 cm (3 in.) CD adapters or Dual
Disc.
Doing so may damage the CD player and/or the CD insert/eject function.
CDs that have a diameter that is not 12
cm (4.7 in.)

401 4-3. Do-it-yourself maintenance
4
Maintenance and care
VERSO-S_EETy p e B
FuseAmpereCircuit
1EU-DRL 15 A
2S-HORN 10 AMultiport fuel injection system/
sequential multiport fuel injection
system
3 H-LP MAIN 7.5 A Headlights
4 MMT 50 A Multi-mode manual transmission
5 H-LP RH HI 10 A Right-hand headlight (high beam)
6H-LP LH HI 10 ALeft-hand headlight (high beam),
gauge and meters
7 H-LP RH LO 10 A Right-hand headlight (low beam)
8 H-LP LH LO 10 ALeft-hand headlight (low beam),
manual headlight leveling dial

520 6-2. Customization
VERSO-S_EE
Automatic
light con-
trol system
(P. 210)Light sensor sensi-
tivityLevel 3 Level 1 to 5 O O
Sensitivity of the
ambient light sen-
sor used for dim-
ming the indicator
on the air condi-
tioning control but-
tons.Standard -2 to 2 — O
Sensitivity of the
ambient light sen-
sor used for bright-
ening the indicator
on the air condi-
tioning control but-
tons.Standard -2 to 2 — O
Lights
(
P. 210)Daytime running
light system (if
equipped)ON OFF O O
Time that the low
beam headlights
are on when the
vehicle is parked30 seconds60 seconds
—O 90 seconds
120 sec-
onds
ItemFunctionDefault set-
tingCustomized
setting