2012 TOYOTA URBAN CRUISER lock

43 1-2. Opening, closing and locking the doors
1
Before driving
URBAN CRUISER_EE (OM52C21E)
If the wireless remote control is used to lock the doors when the elec-
tronic key is near the vehicle, there is a possibility that the door may not
be unlocked by the smart entry & start system. (Use the wireless remote
control to unlock the doors.)
A sudden approach to the effective range or door handle operation may
prevent the doors from being unlocked. In this case, return the door han-
dle to the original position and check that the doors unlock before pulling
the door handle again.
When the vehicle is not driven for extended periods
To prevent theft of the vehicle, do not leave the electronic key within 2 m (6
ft.) of the vehicle.
Security feature
If a door is not opened within approximately 30 seconds after the vehicle is
unlocked, the security feature automatically locks the vehicle again.
Alarms and warning indicators
A combination of exterior and interior alarms as well as warning lights are
used to prevent the theft of the vehicle and accidents resulting from errone-
ous operation.
When any warning lights come on:
Take appropriate measures in response to which warning light comes on.
(P. 427)

44 1-2. Opening, closing and locking the doors
URBAN CRUISER_EE (OM52C21E)
When an alarm sounds:
Take appropriate measures according to the following table.
AlarmSituationCorrection procedure
Exterior alarm
sounds once for
2 secondsTried to lock the doors
using the entry function
while the electronic key is
still inside the passenger
compartmentRetrieve the elec-
tronic key from the
passenger compart-
ment and lock the
doors again
Exterior alarm
sounds once for
10 secondsTried to lock the vehicle
using the entry function
while a door is openClose all of the doors
and lock the doors
again
Interior alarm
sounds continu-
ouslyThe “ENGINE START
STOP” switch was turned
to ACCESSORY mode
while the driver’s door was
open (or the driver’s door
was opened while the
“ENGINE START STOP”
switch was in ACCES-
SORY mode)Turn the “ENGINE
START STOP” switch
OFF and close the
driver’s door
The “ENGINE START
STOP” switch was turned
OFF while the driver’s door
was openClose the driver’s
door

45 1-2. Opening, closing and locking the doors
1
Before driving
URBAN CRUISER_EE (OM52C21E)
If the smart entry & start system does not operate properly
Locking and unlocking the doors: Use the mechanical key. (P. 472)
Starting the engine: P. 473
When the electronic key battery is fully depleted
P. 386
Customization
Settings (e.g. smart entry & start system) can be changed.
(Customizable features P. 514)

46 1-2. Opening, closing and locking the doors
URBAN CRUISER_EE (OM52C21E)
Certification for the smart entry & start system
Hereby, Toyota Motor Corporation, declares that this TMLF-2 is in
compliance with the essential requirements and other relevant pro-
visions of Directive 1999/5/EC.

47 1-2. Opening, closing and locking the doors
1
Before driving
URBAN CRUISER_EE (OM52C21E)

48 1-2. Opening, closing and locking the doors
URBAN CRUISER_EE (OM52C21E)

49 1-2. Opening, closing and locking the doors
1
Before driving
URBAN CRUISER_EE (OM52C21E)
Hereby, Tokai Rika Co., Ltd., declares that this Electronic Key,
model B90EA, is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC.

50 1-2. Opening, closing and locking the doors
URBAN CRUISER_EE (OM52C21E)