Page 212 of 580

212 2-1. Driving procedures
PRIUS +_OM_OM47821E_(EE)
NOTICE
When driving the vehicle
Do not depress the accelerator and brake pedals at the same time during
driving, as this may restrain driving torque.
Do not use the accelerator pedal or depress the accelerator and brake
pedals at the same time to hold the vehicle on a hill.
Avoiding damage to vehicle parts
Do not turn the steering wheel fully in either direction and hold it there for
an extended period of time.
Doing so may damage the power steering motor.
When driving over bumps in the road, drive as slowly as possible to avoid
damaging the wheels, underside of the vehicle, etc.
If you get a flat tire while driving
A flat or damaged tire may cause the following situations. Hold the steering
wheel firmly and gradually depress the brake pedal to slow down the vehicle.
It may be difficult to control your vehicle.
The vehicle will make abnormal sounds or vibrations.
The vehicle will lean abnormally.
Information on what to do in case of a flat tire. (P. 482, 494)
Page 487 of 580
5
487 5-2. Steps to take in an emergency
When trouble arises
PRIUS +_OM_OM47821E_(EE)Firmly tighten each wheel nut
two or three times in the order
shown in the illustration.
Tightening torque:
103 N•m (10.5 kgf•m, 76 ft•lbf)
For vehicles with 16 inch wheels,
reinstall the wheel ornament.
*
Align the cutout of the wheel
ornament with the valve stem as
shown.
*: The wheel ornament cannot be
installed on the compact spare
tire.
Stow the flat tire, tire jack and all tools.
STEP 4
STEP 5
STEP 6
Page 492 of 580

492 5-2. Steps to take in an emergency
PRIUS +_OM_OM47821E_(EE)
CAUTION
Replacing a flat tire
Do not touch the disc wheels or the area around the brakes immediately
after the vehicle has been driven.
After the vehicle has been driven the disc wheels and the area around the
brakes will be extremely hot. Touching these areas with hands, feet or
other body parts while changing a tire, etc. may result in burns.
Failure to follow these precautions could cause the wheel nuts to loosen
and the tire to fall off, resulting in death or serious injury.
• Have the wheel nuts tightened with a torque wrench to 103 N•m (10.5
kgf•m, 76 ft•lbf) as soon as possible after changing wheels.
• When installing a tire, only use wheel nuts that have been specifically
designed for that wheel.
• If there are any cracks or deformations in the bolt screws, nut threads
or bolt holes of the wheel, have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and equipped
professional.
• When installing the wheel nuts, be sure to install the wheel nuts with
the tapered end facing inward. (P. 426)
After using the tools and jack
Before driving, make sure all the tools and jack are securely in place in their
storage location to reduce the possibility of personal injury during a collision
or sudden braking.
Page 550 of 580
550 6-1. Specifications
PRIUS +_OM_OM47821E_(EE)
Tires and wheels
Ty p e A
Ty p e B
Compact spare tire (if equipped)
Tire size205/60R16 92V
Tire inflation pressure
(Recommended cold tire infla-
tion pressure)Except eco package
Front tire
240 kPa (2.4 kgf/cm
2 or bar, 35 psi)
Rear tire
230 kPa (2.3 kgf/cm
2 or bar, 33psi)
Eco package
Front tire
250 kPa (2.5 kgf/cm
2 or bar, 36 psi)
Rear tire
240 kPa (2.4 kgf/cm
2 or bar, 35 psi)
Wheel size 16 6 1/2J
Wheel nut torque 103 N•m (10.5 kgf•m, 76 ft•lbf)
Tire size215/50R17 91V
Tire inflation pressure
(Recommended cold tire
inflation pressure)230 kPa (2.3 kgf/cm2 or bar, 33 psi)
Wheel size 17 7J
Wheel nut torque 103 N•m (10.5 kgf•m, 76 ft•lbf)
Tire sizeT135/70D17 102M
Spare tire inflation pressure
(Recommended cold tire infla-
tion pressure)420 kPa (4.2 kgf/cm2 or bar, 60 psi)
Wheel size 17 4T
Wheel nut torque 103 N•m (10.5 kgf•m, 76 ft•lbf)