2012 TOYOTA PRIUS PLUS sensor

132 1-4. Adjustable components (seats, mirrors, steering wheel)
PRIUS +_OM_OM47821E_(EE)
Adjusting the height of rear view mirror (vehicles with manual
anti-glare inside rear view mirror)
Adjust the height of the rear view
mirror by moving it up and down.
To prevent sensor error (vehicles with auto anti-glare inside rear view
mirror)
CAUTION
Caution while driving
Do not adjust the position of the mirror while driving.
Doing so may lead to mishandling of the vehicle and cause an accident,
resulting in death or serious injury.
To ensure that the sensors operate prop-
erly, do not touch or cover them.

148
1-7. Theft deterrent system
PRIUS +_OM_OM47821E_(EE)
Double locking system
Setting the double locking system
Turn the “POWER” switch off, have all the passengers exit the vehi-
cle and ensure that all the doors are closed.
Using the entry function:
Touch the sensor area on the driver’s outside door handle or front
passenger’s door handle (if equipped with the sensor) twice within 5
seconds.
Using the wireless remote control:
Press
twice within 5 seconds.
: If equipped
Unauthorized access to the vehicle is prevented by disabling the
door unlocking function from both the interior and exterior of the
vehicle.
Vehicles employing this sys-
tem have labels on the win-
dow glass of both front doors.

149 1-7. Theft deterrent system
1
Before driving
PRIUS +_OM_OM47821E_(EE)
Canceling the double locking system
Using the entry function:
Hold the outside door handle on the driver side or front passenger
side (if equipped with the sensor).
Using the wireless remote control:
Press .
CAUTION
Double locking system precaution
Never activate the double locking system when there are people in the vehi-
cle because all the doors cannot be opened from inside the vehicle.

150
1-7. Theft deterrent system
PRIUS +_OM_OM47821E_(EE)
Alarm
: If equipped
The system sounds the alarm and flashes lights when forced entry is
detected.
Triggering of the alarm
The alarm is triggered in the following situations when the alarm
is set.
A locked door or back door is unlocked or opened in any way
other than using the entry function or wireless remote control.
The hood is opened.
If equipped, the intrusion sensor detects something moving
inside the vehicle. (An intruder gets in the vehicle.)
If equipped, the quarter windows or back door window are
tapped or broken.
Setting the alarm system
Close the doors and hood,
and lock all doors using the
entry function or wireless
remote control. The system
will be set automatically after
30 seconds.
The indicator light changes
from being on to flashing when
the system is set.

151 1-7. Theft deterrent system
1
Before driving
PRIUS +_OM_OM47821E_(EE)
Intrusion sensor (if equipped)
The intrusion sensor detects intruders or movement in the vehicle.
When an intruder or movement is detected, the alarm will be trig-
gered.
The intrusion sensor can be canceled using the cancel switch.
This system is designed to deter and prevent vehicle theft but does
not guarantee absolute security against all intrusions.
Canceling the intrusion sensor
Turn the “POWER” switch off
and press the intrusion sensor
cancel switch.
Pressing the switch again will re-
enable the intrusion sensor.
The intrusion sensor will revert to
on each time the “POWER”
switch is turned to ON mode.
Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm:
Unlock the doors using the entry function or wireless remote
control.
Start the hybrid system. (The alarm will be deactivated or
stopped after a few seconds.)

153 1-7. Theft deterrent system
1
Before driving
PRIUS +_OM_OM47821E_(EE)
Alarm-operated door lock
When the alarm is operating, the doors are locked automatically to pre-
vent intruders.
Do not leave the key inside the vehicle when the alarm is operating, and
make sure the key is not inside the vehicle when recharging or replacing
the 12-volt battery.
Canceling and automatic re-enabling of the intrusion sensor
The alarm will still be set even when the intrusion sensor is canceled.
After the intrusion sensor is canceled, pressing the “POWER” switch or
unlocking the doors using the entry function or wireless remote control
will re-enable the intrusion sensor.
When the alarm system is set again, the intrusion sensor will be set.
Intrusion sensor considerations
The sensor may trigger the alarm in the following situations:
Persons or pets are in the vehicle.
A window is open.
In this case, the sensor may detect the
following:
• Wind or the movement of objects
such as leaves and insects inside
the vehicle
• Ultrasonic waves emitted from
devices such as the intrusion sen-
sors of other vehicles
• The movement of people outside
the vehicle

155 1-7. Theft deterrent system
1
Before driving
PRIUS +_OM_OM47821E_(EE)
NOTICE
To ensure the intrusion sensor functions correctly
To ensure the system operates correctly
Do not modify or remove the system.
If modified or removed, the proper operation of the system cannot be guar-
anteed.
To ensure that the sensor operates
properly, do not touch or cover them.
Do not spray air fresheners or other
products directly into the sensor holes.

160 1-8. Safety information
PRIUS +_OM_OM47821E_(EE)
SRS airbag system components
Front impact sensors
Front passenger airbag
“PASSENGER AIR BAG”
indicator
SRS warning light
Side impact sensors (front)
Seat belt pretensioners and
force limitersSide airbags
Curtain shield airbags
Side impact sensors (rear)
Driver airbag
Driver’s knee airbag
Airbag sensor assembly
Airbag manual on-off switch