20
Moving the lever to “LOCK” will allow the door to be opened only from th\
e
outside.
Rear door
Doors-Child safety locks
System reset initialization
1. Push and hold “SET” button
until the indicator blinks
three times.
2. Wait a few minutes to allow initialization to complete.
Push up, or squeeze
lock release to lower
Seat belts-Shoulder belt anchor
SAFETY AND EMERGENCY FEATURES
If be
beyo
child
To fi
syste
Se
Sp
To o
Rem
(1) T
(2) L
Refe
(1)
Tire Pressure Monitoring (warning)
System
After adjusting tire pressures, or after tires have been rotated or replaced,\
turn
the ignition switch to “ON” and press and hold the “ SET” button until indicator
blinks three times. Let the vehicle sit for a few minutes to allow initializat\
ion to
complete.
Refer to the load label on the door jamb or the Owner’s Manualfor tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then r\
emains
on, take the vehicle to your local Toyota dealer.
NOTE : The warning light may come on due to temperature changes or changes in
tire pressure from natural air leakage. If the system has not been initializ\
ed
recently, setting the tire pressures to factory specifications should turn off th\
e
light.
125432_resize Matrix-QRG.qxd 11/23/11 9:32 PM Page 20
![TOYOTA MATRIX 2012 E140 / 2.G Quick Reference Guide 20
Moving the lever to “LOCK” will allow the door to be opened only from th\
e
outside.
Rear door
Doors-Child safety locks
System reset initialization
1. Push and hold “SET” button
until the](/manual-img/14/6542/w960_6542-21.png "TOYOTA MATRIX 2012 E140 / 2.G Quick Reference Guide 20
Moving the lever to “LOCK” will allow the door to be opened only from th\
e
outside.
Rear door
Doors-Child safety locks
System reset initialization
1. Push and hold “SET” button
until the")