2012 TOYOTA HILUX oil change

161 2-1. Driving procedures
2
When driving
HILUX_EE (OM0K132E)
NOTICE
When encountering flooded roads
Do not drive on a road that has flooded after heavy rain etc. Doing so may
cause the following serious damage to the vehicle:
Engine stalling
Short in electrical components
Engine damage caused by water immersion
In the event that you drive on a flooded road and the vehicle is flooded, be
sure to have any authorized Toyota dealer or repairer, or another duly quali-
fied and equipped professional check the following:
Brake function
Changes in quantity and quality of oil and fluid used for the engine, trans-
mission, transfer (4WD models), differential, etc.
Lubricant condition for the propeller shaft, bearings and suspension joints
(where possible), and the function of all joints, bearings, etc.

484 4-3. Do-it-yourself maintenance
HILUX_EE (OM0K132E)
Engine oil consumption
The amount of engine oil consumed depends on the oil viscosity, the
quality of the oil and the way the vehicle is driven.
More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.
A new engine consumes more oil.
When judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level accu-
rately.
Oil consumption: Max. 1.0 L/1000 km (1.1 qt./600 miles, 0.9 Imp.qt./
600 miles)
If your vehicle consumes more than 1.0 L (1.1 qt., 0.9 Imp.qt.) every
1000 km (600 miles), contact any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional.
After changing the engine oil
The engine oil maintenance data should be reset. Perform the following pro-
cedures:
Switch the display to the trip meter A (P. 178) when the engine is
in the “ON” position.
Turn the engine switch to the “LOCK” position.
While pressing the odometer/trip meter display change button
(P.178), turn the engine switch to the “ON” position (do not start
the engine because reset mode will be canceled). Continue to
press and hold the button for more than one second after the trip
meter displays “000000”.
STEP1
STEP2
STEP3

554 5-2. Steps to take in an emergency
HILUX_EE (OM0K132E)
*: Driver’s seat belt buzzer:
The driver’s seat belt buzzer sounds to alert the driver that his or her seat
belt is not fastened. The buzzer sounds intermittently for 30 seconds after
the vehicle reaches a speed of 15 km/h (9 mph). Then, if the seat belt is still
unfastened, the buzzer will sound in a different tone for 90 more seconds.
Warning lightWarning light/DetailsCorrection procedure
(for front
passenger)
Front passenger’s seat
belt reminder light
Warns the front passen-
ger to fasten his/her seat
belt
Fasten the seat belt.
Unengaged “Park” warn-
ing light (if equipped)
The transmission “Park”
mechanism is not
engaged.Shift front drive control lever
to “H2” or “H4” or “L4”.
Low engine oil level warn-
ing light
Indicates that engine oil
level is lowCheck the level of engine oil
and add more oil if neces-
sary.
(remains on)Engine oil change
reminder light
Indicates that the engine
oil should be changed
Comes on approximately
30000 km (18000 miles)
after the engine oil has
been changed (and the oil
maintenance date has
been reset)Have the engine oil and oil
filter checked and/or
changed by any authorized
Toyota dealer or repairer, or
another duly qualified and
equipped professional. After
changing the engine oil, the
oil change system should
be reset. (P. 484)

603 6-1. Specifications
6
Vehicle specifications
HILUX_EE (OM0K132E)Recommended viscosity (SAE):
SAE 0W-30 is filled into your
Toyota vehicle at manufacturing,
and the best choice for good fuel
economy and good starting in
cold weather.
The 0W portion of the oil viscosity rating indicates the characteristic of the
oil which allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
The 30 in 0W-30 indicates the oil viscosity when the oil is at its operating
temperature. An oil with a higher viscosity may be better suited if the vehi-
cle is operated at high speeds, or under extreme load conditions.
Temperature range anticipated before
next oil change.
Preferred

605 6-1. Specifications
6
Vehicle specifications
HILUX_EE (OM0K132E)Recommended viscosity (SAE):
SAE 5W-30 is filled into your
Toyota vehicle at manufacturing,
and the best choice for good fuel
economy and good starting in
cold weather.
If you use SAE 10W-30 or a
higher viscosity engine oil in
extremely low temperatures, the
engine may become difficult to
start, so SAE 5W-30 engine oil is
recommended.
The 5W portion of the oil viscosity rating indicates the characteristic of the
oil which allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
The 30 in 5W-30 indicates the oil viscosity when the oil is at its operating
temperature. An oil with a higher viscosity may be better suited if the vehi-
cle is operated at high speeds, or under extreme load conditions.
Temperature range anticipated before
next oil change.
Preferred

630 Alphabetical index
HILUX_EE (OM0K132E)
Valet key ..................................... 44
Vanity mirrors .......................... 445
Vehicle identification
number ................................... 598
Vehicle stability control .......... 220
VSC ........................................... 220
Warning buzzers
Key reminder......................... 555
Seat belt reminder................. 553
Warning lights
Anti-lock brake system .......... 551
Automatic transmission fluid
temperature ........................ 551
Brake system ........................ 549
Charging system ................... 550
Diesel particulate filter........... 552
Electronic engine control
system ................................ 550
Engine oil change
reminder ............................. 554
Fuel filter ............................... 552
Low engine oil level............... 554
Low engine oil pressure ........ 550
Low fuel level ........................ 553
Malfunction indicator lamp .... 550
Open door ............................. 553
Seat belt reminder light ......... 553
SRS airbags .......................... 551
Timing belt replacement........ 551Washer
Checking ............................... 493
Preparing and checking
before winter....................... 234
Switch ................................... 199
Washing and waxing ............... 462
Weight....................................... 595
Wheels ...................................... 502
Window glasses ........................ 92
Window lock switch .................. 93
Windows
Power windows ....................... 92
Rear window defogger .......... 264
Washer ................................. 199
Windshield wipers ................... 199
Wireless remote control key
Locking/Unlocking................... 46
Replacing the battery ............ 506
Wireless remote control key ... 46
WMA disc ......................... 279, 333V
W

635 What to do if...
HILUX_EE (OM0K132E)
Warning lights
P. 5 4 9P. 551
P. 5 5 0P. 552
P. 5 5 0P. 552
P. 5 5 0P. 553
P. 5 5 1P. 553
P. 5 5 1P. 553
P. 5 5 1P. 554
P. 5 5 1P. 554
P. 5 5 1P. 554
P. 5 5 1P. 554
P. 551
Brake system warning
lightTiming belt replacement
warning light
Charging system
warning lightFuel system warning
light
Low engine oil pressure
warning lightDPF system warning
light
Malfunction indicator
lampOpen door warning light
SRS warning lightLow fuel level warning
light
ABS warning lightDriver’s seat belt
reminder light
VSC OFF indicator lightFront passenger’s seat belt
reminder light
Slip indicator lightUnengaged “Park”
warning light
Cruise control indicator
lightLow engine oil level
warning light
Engine oil change
reminder light
Four-wheel drive
indicator light
Automatic transmission
fluid temperature warning
light