2012 TOYOTA AYGO low beam

AYGO_WE_99E96E
6
Front fog lights P. 152
Pictorial indexExterior
Front turn signal lights P. 140
Side turn signal lights P. 140
Outside rear view mirrors P. 65
Headlights (low and high beam) P. 148
Front position lights P. 148
Windshield wiper P. 154
Hood P. 254
3-door models
Daytime running
lights
 P. 150

AYGO_WE_99E96E
8
Front fog lights P. 152
Pictorial indexExterior
Front turn signal lights P. 140
Side turn signal lights P. 140
Outside rear view mirrors P. 65
Headlights (low and high beam) P. 148
Front position lights P. 148
Windshield wiper P. 154
Hood P. 254
5-door models
Daytime running
lights
 P. 150

146 2-2. Instrument cluster
AYGO_WE_99E96E
Indicators
The indicators inform the driver of the operating state of the
vehicle’s various systems.
*1: These lights turn on when the engine switch is turned to the “ON”
position to indicate that a system check is being performed. They
will turn off after the engine is started, or after a few seconds. There
may be a malfunction in a system if a light does not come on, or if
the lights do not turn off. Have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and
equipped professional.
*2: The light flashes to indicate that the system is operating.
Turn signal indicator
(P. 140)Rear fog light indicator
(P. 152)
Headlight low beam
indicator (P. 148)Shift position and gear
position indicators
(P. 133)
Headlight high beam
indicator (P. 148)
(Vehicles with a multi-mode manual transmission)
*1,2
(If equipped)
Slip indicator
(P. 158)
(If equipped)
Front fog light indicator
(P. 153)

148
AYGO_WE_99E96E
2-3. Operating the lights and wipers
Headlight switch
Turning on the high beam headlights
With the headlights on, push
the lever away from you to
turn on the high beams.
Pull the lever toward you to the
center position to turn the high
beams off.
Pull the lever toward you and
release it to flash the high
beams once.
You can flash the high beams
with the headlights on or off.
The headlights can be operated manually.
Turning the end of the lever turns on the lights as follows:
The front position,
tail, license plate and
instrument panel
lights turn on.
The headlights and
all the lights listed
above turn on.

189 3-2. Using the audio system (Type A)
3
Interior features
AYGO_WE_99E96E
CAUTION
Certification for the CD player
This product is a class I laser product.
A laser beam leak may result in hazardous radiation exposure.
Do not open the cover of the player or attempt to repair the unit yourself.
Refer servicing to qualified personnel.
Laser power: No hazardous
NOTICE
CDs and adapters that cannot be used
Do not use the following types of CDs or 8 cm (3 in.) CD adapters or Dual
Disc.
Doing so may damage the CD player and/or the CD insert/eject function.
CDs that have a diameter that is not 12
cm (4.7 in.)
Low-quality and deformed CDs

204 3-3. Using the audio system (Type B)
AYGO_WE_99E96E
Compatible disc formats
In order to be able to play a recorded CD-R or CD-RW, when recording it
is preferable to select standards ISO 9660 level 1.2 or Joliet.
If the disc is recorded in another format, it may not be played correctly.
It is recommended that the same recording standard is always used for an
individual disc, with as low a speed as possible (4x maximum) for optimum
sound quality.
In the particular case of a multi-session CD, the Joliet standard is recom-
mended.
CAUTION
Certification for the CD player
This product is a class I laser product.
A laser beam leak may result in hazardous radiation exposure.
Do not open the cover of the player or attempt to repair the unit yourself.
Refer servicing to qualified personnel.
Laser power: No hazardous
NOTICE
CDs and adapters that cannot be used
Do not use the following types of CDs or 8 cm (3 in.) CD adapters or Dual
Disc.
Doing so may damage the CD player and/or the CD insert/eject function.
CDs that have a diameter that is not 12
cm (4.7 in.)