2012 TOYOTA AYGO audio

197 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99E96E
Using the station list
Updating the station list
Press and hold the “LIST” button to builds or updates the list of sta-
tions.
Available stations will be listed on the display.
Selecting a station from the station list
Press the “LIST” button to display the list of stations received
in alphabetical order.
Press ( or ) to select the desired radio station and
then press (OK).
Pressing “ ” or “ ” on the “SEEK” button changes to the next or
previous letter (e.g. A, B, D, F, G, J, K, ...).

198 3-3. Using the audio system (Type B)
AYGO_WE_99E96E
Selecting a play mode
Press the “MENU” button.
Press (Radio).
Press one of to select.
“TA”: The TA (Traffic Announcement) function gives
priority to TA alert messages. To operate, this
function needs good reception of a radio station
transmitting this type of message. When a traffic
report is transmitted, the current audio source
(Radio, CD, USB, etc.) is interrupted automati-
cally to play the TA message. Normal playback
of the audio source resumes at the end of the
transmission of the message.
“RDS”: RDS, if displayed, enables you to continue lis-
tening to the same station by automatically
retuning to alternative frequencies. However, in
certain conditions, coverage of an RDS station
may not be assured throughout the country as
radio stations do not cover 100% of the territory.
This explains the loss of reception of the station
during a journey.
“TXT”: Radio text is information transmitted by the radio
station related to the current program or song.
“Write freq.”: Enter a frequency manually.
Press (+ or -) to select the desired fre-
quency.
Press (OK) to save the setting.

199 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99E96E
Reception sensitivity
The exterior environment (hills, buildings, tunnel, car park, below
ground...) may prevent reception, even in RDS station tracking
mode.This phenomenon is normal in the propagation of radio waves and
is in no way indicative of a fault with the audio system.
The radio antenna is mounted on the roof. The antenna can be removed
from the base by turning it.
NOTICE
To prevent damage, remove the antenna in the following cases.
The antenna will touch the ceiling of a garage.
A cover will be put on the roof.

200
3-3. Using the audio system (Type B)
AYGO_WE_99E96E
Using the CD player
Loading CDs
Insert a CD into the disc slot.
Ejecting CDs
Press and remove the CD.
Selecting a track/file
Press “ ” or “ ” on the “SEEK” button to select the next or previ-
ous track/file.
: If equipped
Insert a CD or press the “SRC/ ” button repeatedly until CD mode is
displayed.
Vo lu m eDisc slotCD eject Displaying the main menu
Power on/offDisplaying a track/file listHalt current operation
Selecting the source
Selecting a track/file,
fast-forward or rewind

201 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99E96E
Fast-forwarding and rewinding tracks/files
Press and hold “ ” or “ ” on the “SEEK” button.
Selecting a track/file from a list
Press the “LIST” button.
Press ( or ) to select the item in the list, then press
(OK). Continue to select the item until desired track/file
is displayed.
Press “ ” or “ ” on the “SEEK” button to jump a page.
Return to the top level of the folder structure to select the type of
tracks/files.
By folders: All folders containing audio files, recognized on the peripheral
device, are in alphabetical order without following the folder
structure.
By playlist: If playlists have been saved.
Selecting a type of track/file
Audio CD
Press ( or ) to select the next or previous track.
MP3/WMA disc
By folders: Press ( or ) to select the next or previ-
ous folder.
By playlist: Press ( or ) to select the next or previ-
ous playlist.

202 3-3. Using the audio system (Type B)
AYGO_WE_99E96E
Selecting a play mode
Press the “MENU” button.
Press (Media).
Press one of to select.
“Normal”: Normal play order
“Random”: Random play on the CD (Audio CD)
Random play on the folder/playlist (MP3/WMA
disc)
“Random all”: Random play in all the tracks/files (MP3/WMA
disc)
“Repeat”: Repeat play for the folder/playlist (MP3/WMA
disc)
“TA”: When a traffic report is transmitted, the current
audio source is interrupted automatically to
play the TA message. Normal playback of the
audio source resumes at the end of the trans-
mission of the message.
Press (OK) to save the setting.

203 3-3. Using the audio system (Type B)
3
Interior features
AYGO_WE_99E96E
Discs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea-
tures, or due to scratches, dirt or deterioration.
Audio CD
MP3/WMA disc
CDs with copy-protect features may not be used.
MP3 and WMA files
MP3 (MPEG Audio LAYER3) is a standard audio compression format.
Files can be compressed to approximately 1/10 of their original size by using
MP3 compression.
WMA (Windows Media Audio) is a Microsoft audio compression format.
This format compresses audio data to a size smaller than that of the MP3
format.
MP3 file compatibility
A high compression rate can adversely affect sound quality.
The CD player can read up to 255 MP3 files spread over 8 folder levels
with a maximum of 192 folders. However, it is recommended that this be
kept to 2 levels so as to limit the time taken to access and play the CD.
While playing, the folder structure is not observed.
Playlists
The types of playlists that are accepted: “.m3u” and “.wpl”.
The number of files recognized is limited to 5000 in 500 folders on a maxi-
mum of 8 levels.

204 3-3. Using the audio system (Type B)
AYGO_WE_99E96E
Compatible disc formats
In order to be able to play a recorded CD-R or CD-RW, when recording it
is preferable to select standards ISO 9660 level 1.2 or Joliet.
If the disc is recorded in another format, it may not be played correctly.
It is recommended that the same recording standard is always used for an
individual disc, with as low a speed as possible (4x maximum) for optimum
sound quality.
In the particular case of a multi-session CD, the Joliet standard is recom-
mended.
CAUTION
Certification for the CD player
This product is a class I laser product.
A laser beam leak may result in hazardous radiation exposure.
Do not open the cover of the player or attempt to repair the unit yourself.
Refer servicing to qualified personnel.
Laser power: No hazardous
NOTICE
CDs and adapters that cannot be used
Do not use the following types of CDs or 8 cm (3 in.) CD adapters or Dual
Disc.
Doing so may damage the CD player and/or the CD insert/eject function.
CDs that have a diameter that is not 12
cm (4.7 in.)