2012 TOYOTA AYGO turn signal

140
2-1. Driving procedures
AYGO_WE_99E96E
Turn signal lever
Turn signals can be operated when
The engine switch is in the “ON” position.
If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
The turn signal lever can be used to show the following intentions
of the driver:
Right turn
Left turn
Lane change to the right
(push and hold the lever
partway)
The right hand signals will
flash until you release the
lever.
Lane change to the left
(push and hold the lever
partway)
The left hand signals will flash
until you release the lever.

146 2-2. Instrument cluster
AYGO_WE_99E96E
Indicators
The indicators inform the driver of the operating state of the
vehicle’s various systems.
*1: These lights turn on when the engine switch is turned to the “ON”
position to indicate that a system check is being performed. They
will turn off after the engine is started, or after a few seconds. There
may be a malfunction in a system if a light does not come on, or if
the lights do not turn off. Have the vehicle inspected by any autho-
rized Toyota dealer or repairer, or another duly qualified and
equipped professional.
*2: The light flashes to indicate that the system is operating.
Turn signal indicator
(P. 140)Rear fog light indicator
(P. 152)
Headlight low beam
indicator (P. 148)Shift position and gear
position indicators
(P. 133)
Headlight high beam
indicator (P. 148)
(Vehicles with a multi-mode manual transmission)
*1,2
(If equipped)
Slip indicator
(P. 158)
(If equipped)
Front fog light indicator
(P. 153)

183 3-2. Using the audio system (Type A)
3
Interior features
AYGO_WE_99E96ESelecting program type
Press the “PTY” button.
Each time the “PTY” button is pressed, the program type changes in the
following order: “NEWS”  “SPORTS”  “TALK”  “POP”  “CLAS-
SICS”.
Traffic information
Press the “TA” button.
TP mode: The system automatically switches to traffic information
when a broadcast with a traffic information signal is
received.
The station returns to the previous one when the traffic
information ends.
TA mode: Traffic information can be heard only when a signal is
received. The system switches to the mute mode when
a signal is not received. In CD mode, the system auto-
matically switches to traffic information when a signal is
received.
The audio system returns to the mute, CD mode when the
traffic information ends.
Audio system mode changes as follows each time the “TA” button
is pressed:
FM modes: “TP”  “TA”  off
Modes other than the radio modes: “TA”
 off
Emergency broadcast reception mode
“ALARM” appears in the display in the event that an emergency
broadcast is received, and the emergency broadcast is aired.

184 3-2. Using the audio system (Type A)
AYGO_WE_99E96E
EON (Enhanced Other Network) system (for traffic announcement
function)
If the RDS station (with EON data) you are listening to is not broadcasting a
traffic information program and the audio system is in the TA (traffic
announcement) mode, the radio will be switched automatically to a station
broadcasting a traffic information program in the EON AF list when traffic
information begins.
When the battery is disconnected
Stations presets are erased.
Reception sensitivity
Maintaining perfect radio reception at all times is difficult due to the con-
tinually changing position of the antenna, differences in signal strength
and surrounding objects, such as trains, transmitters, etc.
When the “AST” button is used, automatic station selection and auto-
matic registering of the stations may not be possible.
The radio antenna is mounted on the roof. The antenna can be removed
from the base by turning it.
Digital Audio Broadcast (DAB) radio
The optional radio antenna and tuner are necessary for the use of Digital
Audio Broadcast (DAB) radio.
NOTICE
To prevent damage, remove the antenna in the following cases
The antenna will touch the ceiling of a garage.
A cover will be put on the roof.

286 4-3. Do-it-yourself maintenance
AYGO_WE_99E96E
*1: Vehicles without VSC system
*2: Vehicles with VSC system
*3: Replace the fuse with one of the same ampere rating as the original 10 AM2 30 AStarting system, IG1, IG2, STA
fuses
11 HAZARD 10 ATurn signal lights, emergency
flashers, gauges and meters
12 H-LP MAIN 20 A H-LP LH, H-LP RH fuses
13 DOME 15 AGauges and meters, interior light,
audio system, tachometer
14 EFI 15 AElectric cooling fan, multiport fuel
injection system/sequential multi-
port fuel injection system
15 HORN 10 A Horn
16 SPARE 7.5 A Spare fuse
17 SPARE 10 A Spare fuse
18 SPARE 15 A Spare fuse
19 AMT 50 A Multi-mode manual transmission
20 RADIATOR30 A
*3
Electric cooling fan
40 A*3
21ABS
*140 AAnti-lock brake system
VSC*250 AAnti-lock brake system and vehicle
stability control system
22 EMPS 50 A Electric power steering system
FuseAmpereCircuit

292
4-3. Do-it-yourself maintenance
AYGO_WE_99E96E
Light bulbs
You may replace the following bulbs by yourself. The difficulty level
of replacement varies depending on the bulb. If necessary bulb
replacement seems difficult to perform, contact any authorized
Toyota dealer or repairer, or another duly qualified and equipped
professional.
For more information about replacing other light bulbs, contact any
authorized Toyota dealer or repairer, or another duly qualified and
equipped professional.
Preparing for light bulb replacement
Check the wattage of the light bulb to be replaced. (P. 354)
Front bulb locations
Front position lights
Front fog lights (if equipped)
Front turn signal lights Headlights

293 4-3. Do-it-yourself maintenance
4
Maintenance and care
AYGO_WE_99E96E
Replacing light bulbs
Headlights
Unplug the connector.
Rear bulb locations
*1: Left-hand drive vehicles
*2: Right-hand drive vehicles
Stop/tail lights
License plate lights Rear turn signal lights
Rear fog light*1 or
Back-up light
*2
Back-up light*1 or
Rear fog light
*2
High mounted stoplight

297 4-3. Do-it-yourself maintenance
4
Maintenance and care
AYGO_WE_99E96EFront turn signal lights
Turn the bulb base counterclock-
wise.
Remove the light bulb.
Back-up light, stop/tail lights, rear turn signal lights and rear
fog light
Open the back door and remove
the cover using a Phillips-head
screwdriver.