6OWNER SAFETY INFORMATIONSEAT BELTS
USING SEAT BELTSSeat belts and child safety seats are the most effective means of
protecting occupants if a collision occurs. Therefore, wearing a seat belt
is required by law in most jurisdictions.
Both the driver and passenger seating positions are equipped with three-
point inertia reel seat belts. Inertia reel belts are tensioned automatically
to allow occupants to move comfortably during normal driving conditions.
The belt reel automatically locks to prevent movement of occupants when
Model S experiences a force associated with hard acceleration, braking,
cornering or an impact in a collision. To fasten a belt1. Ensure correct positioning of the seat.
2. Draw the belt out
smoothly, ensuring the
belt lays flat across the
pelvis, chest and mid-
point of the collar bone
between the neck and
shoulder.
3. Insert the latch plate into
the buckle and press
down until you hear a
“click” indicating it is
locked in place.
4. Pull the belt to check that it’s securely fastened.
5. Pull the diagonal part of the belt towards the reel to remove excess
slack.
To release a beltHold the belt near the buckle to prevent the belt from retracting too quickly,
then press the button on the buckle. The belt retracts automatically. Wearing seat belts when pregnantDo not put the lap portion or shoulder portion of
the seat belt over the abdominal area. Wear the
lap portion of the belt as low as possible across
the hips, not the waist. Position the shoulder
portion of the belt between the breasts and to
the side of the abdomen. Consult your doctor for
specific guidance.Seat belt reminder
The seat belt reminder on the instrument panel alerts you
if the seat belt for an occupied front seat is not fastened.
If the belt remains unfastened, this reminder flashes, and
you’ll hear an intermittent chime.
Seat belt pre-tensionersThe front seat belts are equipped with
pre-tensioners that work in conjunction with
the airbags in a severe frontal collision. The
pre-tensioners automatically retract both the seat
belt buckle and the seat belt webbing, reducing
slack in both the lap and diagonal portions of the
belts, resulting in reduced forward movement of
the occupant. Once the seat belt pre-tensioners
have been activated, they must be replaced. After any accident, have the
airbags, seat belt pre-tensioners, and any associated components checked
and, if necessary, replaced.
12OWNER SAFETY INFORMATIONREAR FACING CHILD SEATS
OPENING THE TESLA REAR FACING CHILD SEATSIMPORTANT! Rear facing seats are child restraint systems and must only
be used for children over 37 “ (94 cm) tall and weighing between 35 and
77 lbs (16.2 to 35.2 kg). Always ensure the top of the child’s head can not
contact the vehicle and that the child is seated comfortably with the seat
belts positioned and latched correctly. Follow all instructions provided and
do not use supplemental child restraint systems in these seats.
The rear facing child seats are folded into the floor of the trunk. Follow
these steps to open:
1. Remove cover from the trunk floor.2. Pull the yellow strap attached to the seat to lift up the seat assembly.
3. Push the seat assembly into position and make sure the retaining
catches engage.
4. Check that the seat base is securely retained by trying to pull the rear
of the seat assembly towards you.
5. Pull the retaining bracket towards you to release.6. Fold the head supports towards you.
7. Raise the seat back to the upright position and push until it locks into
position.8. Check that the seat back and seat base are securely retained in the
upright position by trying to pull the seat back towards you.
WARNING: The rear facing seats are child safety seats. They are not
intended to seat adults or children outside the height and weight ranges
provided above.
WARNING: Follow all instructions and heed all warnings related to the rear
facing child seats. Failure to do so can compromise occupant safety.
