2012 SUZUKI GRAND VITARA maintenance

[x] Cancel search: maintenance

Page 250 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-1INSPECTION AND MAINTENANCE
79K21-03E
60A187S
WARNING
You should take extreme care when
working on your vehicle to prevent
accidental injury. Here are a few pre-
cautions that you should be espe-
ci

Page 251 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-2
INSPECTION AND MAINTENANCE
79K21-03E
NOTICE (for U.S.A.)
Maintenance, replacement or repair of
the emission control devices and sys-
tems may be performed by any automo-
bile repair establishment

Page 252 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-3INSPECTION AND MAINTENANCE
79K21-03E
Periodic Maintenance ScheduleR: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
#2: Be sure to perform the engine coolant level

Page 253 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-4
INSPECTION AND MAINTENANCE
79K21-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
#1: Inspect at 250000 km (150000 miles) or 180 months.
#2: Be sure to perfor

Page 254 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-5INSPECTION AND MAINTENANCE
79K21-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessaryInterval: This interval should be judged by
odometer reading or months, whiche

Page 255 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-6
INSPECTION AND MAINTENANCE
79K21-03E
R: Replace or change
I : Inspect, clean, adjust, lubricate or replace as necessary
NOTE:
This table shows the service schedule up to 250000 km (150000 miles).

Page 256 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-7INSPECTION AND MAINTENANCE
79K21-03E
Maintenance Recommended under Severe Driving ConditionsIf the vehicle is usually used under the conditions corresponding to any severe condition code given belo

Page 257 of 337

SUZUKI GRAND VITARA 2012  Owners Manual 7-8
INSPECTION AND MAINTENANCE
79K21-03E
NOTE:
I – Inspect, clean, adjust, lubricate or replace as necessary
T – Tighten to the specified torque
R – Replace or change
L – Lubricate
*1 Inspect
Page:   < prev 1-8 9-16 17-24 25-32 33-40 41-48 49-56 ... 72 next >