2012 SUBARU IMPREZA WRX STI display

Black plate (217,1)
北米Model "A1130BE-A" EDITED: 2011/ 6/ 7
& MUTE button (models with-
out Hands-free system)Press the “
”button if you wish to
immediately cut the volume to zero.
The audio display will show “MUTE”.
If you press the button again, the original
sound volume will return and “MUTE ”
turns off.
Bluetooth
®
audio (type B
audio)
NOTEFor models with the genuine SUBARU
navigation system, refer to the Owner ’s
Manual supplement for the navigation
system.NOTEThe Bluetooth word mark and logo are
registered tradem arks of Bluetooth
SIG, Inc.
This function enables you to play back
audio sources recorded in Bluetooth
®
audio devices. You need to register the
Bluetooth
®audio device in the system
before using it.
& Media formatBluetooth
®
audio devices cannot be
connected if they are not compatible with
the following Bluetooth
®profiles.
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
& Setting Bluetooth
®audio
1. Select the “BT-A SETUP”menu by
pressing the “MENU”button. For details,
refer to “Other sound setting controls ”F 5-
7.
2. Perform the following procedure by
operating the “TUNE/TRACK/CH” dial
while “BT-A ”is displayed.NOTEYou cannot set a Bluetooth
®
audio
while driving.
! Registering (pairing) device
1. Select the “PAIR AUDIO”menu.
– If a device is already registered,
“MEMORY FULL ”is displayed and the
mode changes to the Bluetooth
®
audio setting mode.
2. After the passkey is shown on the
display, input the passkey into the cell
Audio
5-33
– CONTINUED –
5

Black plate (218,1)
北米Model "A1130BE-A" EDITED: 2011/ 6/ 7
5-34
Audio
phone.
–If you input the correct passkey,
“PAIRED ”is displayed and the regis-
tering procedure is finished.
– If you input an incorrect passkey,
“FAILED ”is displayed, the registering
procedure was not successful and the
mode changes to the Bluetooth
®
audio setting mode.
! Selecting device
1. Select the “SELECT AUDIO ”menu.
– If no devices are registered,
“EMPTY ”is displayed and the mode
changes to the Bluetooth
®
audio
setting mode.
2. Select the “CONFIRM”menu.
– If the device is connected, “SE-
LECTED ”is displayed and the select-
ing procedure is finished.
– If the device cannot be connected,
“FAILED ”is displayed and the select-
ing procedure was not successful.
! Setting passkey
1. Select the “SET PASSKEY ”menu.
– After the currently set passkey is
displayed, a new passkey can be
entered.
2. Input the new passkey by operating
the “TUNE/TRACK/CH ”dial. 3. Select the
“CONFIRM”menu.
– The new passkey is displayed, the
passkey is changed and the mode
changes to the Bluetooth
®
audio
setting mode.
! Deleting device
1. Select the “DELETE AUDIO” menu.
– If no devices are registered,
“EMPTY ”is displayed and the mode
changes to the Bluetooth
®
audio
setting mode.
2. Select the “CONFIRM”menu.
–“ DELETED ”is displayed and the
mode changes to the Bluetooth
®
audio setting mode.
&Bluetooth
®audio operation
NOTE
Depending on the connected device, it
may not activate as per the following
items or not work smoothly.
! How to play back
Press the
button and select the “BT-
A ”mode.
! To select a track from its beginning
Select a track in the same way as for a
CD. Refer to “To select a track from the
beginning” F5-18. !
Repeating
Repeating is operated in the same way as
for a CD. Refer to “Repeating”F 5-19.
Each time you briefly press the
button, the mode changes in the following
sequence.! Random playback
Random playback is operated in the same
way as for a CD. Refer to “Random
playback” F5-20. Each time you press
and hold the
button, the mode
changes in the following sequence.
! Display selection
Select an indication in the same way as
for a CD. Refer to “Display selection” F5-
21. Each time you briefly press thebutton, the indication changes in the
following sequence.

Black plate (222,1)
北米Model "A1130BE-A" EDITED: 2011/ 6/ 7
5-38
Audio
used by a movable body identifi-
cation device.
& Using the Hands-free system! Turning on/off the Hands-free mode1) OFF hook switch
2) ON hook switch
3) Talk switchTo turn on the Hands-free mode, press the
OFF hook switch
. To turn off the
Hands-free mode, press the ON hook
switch
.
! Preparation for using the Hands-
free system
Before using the Hands-free system, it is
necessary to register a cell phone in the system. Perform the following procedure
to register a cell phone.
1. Press the OFF hook switch
.
2. Select “ENGLISH ”/“ FRANÇAIS ”by
operating the “TUNE/TRACK/CH ”dial.
– Then “WELCOME! ”will be dis-
played.
3. Press the “TUNE/TRACK/CH ”dial or
the talk switch
.
4. Select the “RECORD NAME ”menu.
5. Say the name to be registered.
6. Select the “CONFIRM”menu.
– After “CAR M_MEDIA ”is displayed,
a pass key is displayed.
7. Input the displayed pass key into the
cell phone while “PKY: ****”is displayed.
– If you input the correct pass key,
“PAIRED ”is displayed and the regis-
tration procedure is finished.
– If you input an incorrect pass key,
“FAILED ”is displayed and the regis-
tration procedure was not successful.
NOTEWhen the ignition switch is turned to
the “Acc ”or “ON ”position, the regis-
tered cell phone may be automatically
connected to the system. !
Menu list of the Hands-free system
Turn the “TUNE/TRACK/CH ”dial to select
a menu, and then press the dial to enter
the selected menu.

Black plate (226,1)
北米Model "A1130BE-A" EDITED: 2011/ 6/ 7
5-42
Audio
38 security sécurité
39 pair phone jumeler le télé-
phone
40 change name modifier le nom
41 select phone sélectionner le tél-
éphone
42 list phones lister les télé-
phones
43 set pass key configurer le
passe-partout
44 add entry ajouter l ’entrée
45 delete entry supprimer l ’entrée
46 delete speed dial supprimer compo-
sition abrégée
47 by voice vocalement
48 by phone par téléphone
49 call history historique d ’appels
50 set speed dial configurer compo-
sition abrégée
51 incoming entrant
52 outgoing sortant
53 list names lister les noms
54 set PIN configurer NIP
55 phone book lock verrouiller le regis-
tre
!
Updating phonebook data
! Registering by voice
1. Select the “BY VOICE”menu.
2. Press the talk switch
.
3. Say the phone number to be regis-
tered.
4. Select the “CONFIRM”menu.
5. Perform either of the following proce-
dures. –Select the “RECORD NAME ”menu
by operating the “TUNE/TRACK/CH ”
dial.
– Press the talk switch
.
6. Say the name (voice tag) to be
registered.
7. Select the “CONFIRM”menu.
– Then “STORED ”is displayed and
the mode changes to the registering
speed dial mode. Refer to “Registering
speed dial ”F 5-43.
! Registering by phone
1. Select the “BY PHONE”menu.
2. Select the “CONFIRM”menu.
– Then “TRANSFER ”is displayed.
3. Transfer the data from the cell phone.
For details about transferring the data,
refer to the instruction manual of the cell
phone. 4. Perform either of the following proce-
dures.
–Select the “RECORD NAME ”menu
by operating the “TUNE/TRACK/CH ”
dial.
– Press the talk switch
.
5. Say the name (voice tag) to be
registered.
6. Select the “CONFIRM”menu.
– Then “STORED ”is displayed and
the mode changes to the registering
speed dial mode. Refer to “Registering
speed dial ”F 5-43.
! Registering by inputting manually
1. Select the “MANUAL INPUT ”menu by
operating the “TUNE/TRACK/CH ”dial.
2. Input the phone number to be regis-
tered.
3. Perform either of the following proce-
dures. –Select the “RECORD NAME ”menu
by operating the “TUNE/TRACK/CH ”
dial.
– Press the talk switch.
4. Say the name (voice tag) to be
registered.
5. Select the “CONFIRM”menu.
– Then “STORED ”is displayed and
the mode changes to the registering
speed dial mode. Refer to “Registering

Black plate (227,1)
北米Model "A1130BE-A" EDITED: 2011/ 6/ 7
speed dial ”F 5-43.
NOTEWhile inputting the phone numbers, if
“GO BACK ”is chosen using the
“ TUNE/TRACK/CH ”dial, the character
that was input last is deleted.
! Registering from call history
1. Select the “CALL HISTORY ”menu.
2. Select “OUTGOING ”or “INCOMING ”
by operating the “TUNE/TRACK/CH ”dial.
3. Select the phone number by operating
the “TUNE/TRACK/CH ”dial.
4. Perform either of the following proce-
dures. –Select the “RECORD NAME ”menu
by operating the “TUNE/TRACK/CH ”
dial.
– Press the talk switch
.
5. Say the name (voice tag) to be
registered.
6. Select the “CONFIRM”menu.
– Then “STORED ”is displayed and
the mode changes to the registering
speed dial mode. Refer to “Registering
speed dial ”F 5-43.
! Registering from redial
1. Select the “REDIAL”menu. 2. Select the phone number by operating
the
“TUNE/TRACK/CH ”dial.
3. Select the “STORE”menu.
4. Select the “CONFIRM”menu.
5. Perform either of the following proce-
dures. –Select the “RECORD NAME ”menu
by operating the “TUNE/TRACK/CH ”
dial.
– Press the talk switch
.
6. Say the name (voice tag) to be
registered.
7. Select the “CONFIRM”menu.
– Then “STORED ”is displayed and
the mode changes to the registering
speed dial mode. Refer to “Registering
speed dial ”F 5-43.
! Registering from call back
1. Select the “CALL BACK”menu.
2. Select the phone number by operating
the “TUNE/TRACK/CH ”dial.
3. Select the “STORE”menu.
4. Select the “CONFIRM”menu.
5. Perform either of the following proce-
dures. –Select the “RECORD NAME ”menu
by operating the “TUNE/TRACK/CH ”
dial.
– Press the talk switch. 6. Say the name (voice tag) to be
registered.
7. Select the
“CONFIRM”menu.
– Then “STORED ”is displayed and
the mode changes to the registering
speed dial mode. Refer to “Registering
speed dial ”F 5-43.
! Registering speed dial
1. After registering phonebook data, se-
lect the “SPEED DIAL ”menu.
2. Press the preset button (from
to
) to which you want to register the
phone number.
NOTEIf the number to be used is already
registered in speed dial, “OVER-
WRITE? ”will be displayed.
! List names function
The voice tags registered in the phone-
book are spoken by using the list names
function. To use the list names function,
perform the following procedure.
1. Select the “LIST NAMES”menu.
2. Select the registered data by perform-
ing either of the following procedures. –Press the talk switch
.
– Operate the “TUNE/TRACK/CH ”
Audio
5-43
–CONTINUED –
5

Black plate (228,1)
北米Model "A1130BE-A" EDITED: 2011/ 6/ 7
5-44
Audio
dial.
3. After “SELECTED ”is displayed, you
can select the following menus.
. “DIAL ”to make a phone call
. “CHANGE NAME ”to change the name
(voice tag)
. “SET SPD DIAL ”/“SET SPEED DIAL ”
to set the speed dial
. “DELETE ENTRY ”to delete the name
(voice tag) from the phonebook
. “GO BACK ”to go back to the menu
mode
NOTE. After “LIST NAMES ”is selected, if
the OFF hook switch
is pushed, the
selected number is called.
. After “LIST NAMES ”is selected, if
no operation is performed, the mem-
ories are displayed and voice tags are
spoken.
! Changing voice tag
1. Select the “CHANGE NAME ”menu.
2. Select the phone number by perform-
ing either of the following procedures. –Operate the “TUNE/TRACK/CH”
dial.
– Press the talk switch
and say
the voice tag.
3. Select the “CONFIRM”menu. –
Then the selected phone number/
name is displayed.
4. Press the talk switch
.
5. Say the new voice tag.
6. Select the “CONFIRM”menu.
– Then “CHANGED ”is displayed.
! Set speed dial
1. Select “SET SPD DIAL ”by operating
the “TUNE/TRACK/CH ”dial or select
“SET SPEED DIAL ”by using the voice
command system.
2. Select the phone number by perform-
ing either of the following procedures.
–Operate the “TUNE/TRACK/CH ”
dial.
– Press the talk switch
and say
the voice tag.
3. Select the “CONFIRM”menu.
4. Press the preset button (from
to
) to which you want to register the
phone number.
NOTEIf the number to be used is already
registered in speed dial, “OVER-
WRITE? ”will be displayed.
! Deleting the phonebook data
1. Select the “DELETE ENTRY ”menu. 2. Select the phone number by perform-
ing either of the following procedures.
–Operate the “TUNE/TRACK/CH ”
dial.
– Press the talk switch
and say
the voice tag.
3. Select the “CONFIRM”menu.
– Then “DELETED” is displayed and
the selected phonebook data is de-
leted.
! Deleting the speed dial
1. Select “DEL SPD DIAL ”by operating
the “TUNE/TRACK/CH” dial or select
“ DELETE SPEED DIAL ”by using the
voice command system.
2. Press the preset button (from
to
) to which you want to delete the
speed dial.
3. Select the “CONFIRM”menu.
– Then “DELETED” is displayed and
the selected speed dial is deleted.
! Deleting the redial data
1. Select the “REDIAL”menu.
2. Select the phone number by operating
the “TUNE/TRACK/CH ”dial.
3. Select the “DELETE”menu.
4. Select the “CONFIRM”menu.
– Then “DELETED” is displayed and
the selected redial data is deleted.

Black plate (229,1)
北米Model "A1130BE-A" EDITED: 2011/ 6/ 7
! Deleting the callback data
1. Select the “CALLBACK”menu.
2. Select the phone number by operating
the “TUNE/TRACK/CH ”dial.
3. Select the “DELETE”menu.
4. Select the “CONFIRM”menu.
– Then “DELETED ”is displayed and
the selected callback data is deleted.
! Making a phone call
! Making a phone call by saying name
1. Press the talk switch
.
2. Say “DIAL BY NAME ”.
3. Press the talk switchagain.
4. Say the desired name (voice tag) to be
called.
5. Select the “DIAL”menu or press the
OFF hook switch
.
! Making a phone call by saying
number
1. Press the talk switch
.
2. Say “DIAL BY NUMBER ”.
3. Press the talk switchagain.
4. Say the desired phone number to be
called.
5. Select the “DIAL”menu or press the
OFF hook switch
. !
Making a phone call from speed dial
It is possible to select a phone number
from speed dial registered with the in-
vehicle equipment to make a phone call.
1. Press the preset button (from
to
) to which the desired number is
registered.
2. Press the OFF hook switch
.
NOTEWhen a preset button for which num-
bers are not registered is pressed, an
error message is indicated on the audio
screen.
! Redial
1. Select the “REDIAL”menu.
2. Select the desired number by operat-
ing the “TUNE/TRACK/CH ”dial.
3. Select the “DIAL”menu or press the
OFF hook switch
.
! Callback
1. Select the “CALL BACK”menu.
2. Select the desired number by operat-
ing the “TUNE/TRACK/CH ”dial.
3. Select the “DIAL”menu or press the
OFF hook switch. !
Making a phone call from list name
It is possible to select a phone number
from the list name registered with the in-
vehicle equipment to make a phone call.
For details, refer to “List names function ”
F 5-43.
! Top redial
1. Press the OFF hook switch
and
load the outgoing call history.
2. Select the “DIAL”menu or press the
OFF hook switch
.
! Taking a phone call and declining
an incoming call
To take a phone call: Press the OFF
hook switch
.
To put an incoming call on hold (only if
the cell phone has this function): Press the
ON hook switch
briefly.
To decline an incoming call (only if the
cell phone has this function): Press and
hold the ON hook switch
.
! Ending a call
Press the ON hook switch.
Audio
5-45
– CONTINUED –
5

Black plate (230,1)
北米Model "A1130BE-A" EDITED: 2011/ 6/ 7
5-46
Audio
! Volume controlYou can adjust the phone call volume, the
voice volume and the voice guidance
volume. Refer to “Volume control buttons ”
F 5-32.
! Adjustable level of each volumeVolume Range Initial setting
Phone call 0 to 14 7
Voice 0 to 14 7
Voice guidance 0 to 6 3
&
Bluetooth
®setting
! Security setting
After selecting the “SECURITY”menu,
perform the following procedures.
! Setting PIN code
The PIN code is a 4-digit number and is
used when locking the phonebook.
1. Select the “SET PIN”menu.
– Then “CURRENT PIN? ”is dis-
played.
2. Input the current PIN code by perform-
ing either of the following procedures. –Operate the “TUNE/TRACK/CH ”
dial.
– Press the talk switch
and say
the number.
3. Select the “CONFIRM”menu.
4. Input the new PIN code by performing
either of the following procedures. –Operate the “TUNE/TRACK/CH ”
dial.
– Press the talk switchand say
the number.
5. Select the “CONFIRM”menu.
! Locking the phonebook
1. Select “PHBK LOCK” by operating the
“TUNE/TRACK/CH ”dial or say “PHONE-
BOOK LOCK”. –
Then “CURRENT PIN? ”is dis-
played.
2. Input the PIN code by performing
either of the following procedures. –Operate the “TUNE/TRACK/CH ”
dial.
– Press the talk switch
and say
the number.
3. Select the “CONFIRM”menu.
– If the inputted PIN code is correct,
“LOCKED ”is displayed and the pho-
nebook is locked.
NOTEWhile the phonebook is locked, if the
operation restricted menu is selected,
“ PHBK LOCK ”is displayed.
! Unlocking the phonebook
1. Perform either of the following proce-
dures. –Select the “PHBK UNLOCK ”menu
by operating the “TUNE/TRACK/CH ”
dial.
– Press the talk switch
and say
“PHONEBOOK UNLOCK ”.
NOTEIf the phonebook is not locked, “UN-
LOCK ”is displayed and the mode
changes to the security mode.