2012 SUBARU IMPREZA WRX engine

[x] Cancel search: engine

Page 308 of 416

SUBARU IMPREZA WRX 2012 4.G Owners Manual (1) Connect one jumper cable to the 
positive (+) terminal on the discharged
battery. 
(2) Connect the other end of the 
jumper cable to the positive (+) term-
inal of the booster battery. 
(3) Connec

Page 309 of 416

SUBARU IMPREZA WRX 2012 4.G Owners Manual 9-12In case of emergency
Engine overheating
WARNING
Never attempt to remove the radia- 
tor cap until the engine has been
shut off and has fully cooled down.
When the engine is hot, the coolant
is und

Page 313 of 416

SUBARU IMPREZA WRX 2012 4.G Owners Manual 9-16In case of emergency
WARNING
. Never turn the ignition switch to
the “LOCK ”position while the
vehicle is being towed because 
the steering wheel and the direc-
tion of the wheels will be lock

Page 317 of 416

SUBARU IMPREZA WRX 2012 4.G Owners Manual 10-2Appearance care
Exterior care &Washing
CAUTION
. When washing the vehicle, the
brakes may get wet. As a result, 
the brake stopping distance will 
be longer. To dry the brakes,
drive the vehicle a

Page 318 of 416

SUBARU IMPREZA WRX 2012 4.G Owners Manual CAUTION
. Be careful not to damage brake
hoses, sensor harnesses, and 
other parts when washing sus-
pension components.
. Be careful not to flush the engine
bottom for a long time. It may
cause damag

Page 322 of 416

SUBARU IMPREZA WRX 2012 4.G Owners Manual Maintenance schedule....................................... 11-3
Maintenance precautions ................................... 11-3
Before checking or servicing in the engine compartment ...............

Page 324 of 416

SUBARU IMPREZA WRX 2012 4.G Owners Manual Maintenance schedule 
The scheduled maintenance items re- 
quired to be serviced at regular intervals
are shown in the“Warranty and Main-
tenance Booklet ”.
For details of your maintenance schedul

Page 325 of 416

SUBARU IMPREZA WRX 2012 4.G Owners Manual 11-4Maintenance and service
guard against getting oil or fluids 
in your eyes. If something does
get in your eyes, thoroughly
wash them out with clean water.
. Do not tamper with the wiring of
the SRS