Components of the breakdown kit
Fig. 177
Components of the breakdown kit
First read and observe the introductory information and safety warn-
ings on page 200.
The breakdown kit contains the following parts:
Valve remover
Sticker with speed designation
“max. 80 km/h”/“max. 50 mph”
Inflation hose with plug
Air compressor
Tyre inflation hose
Tyre inflation pressure indicator
Air release valve
ON and OFF switch
12 volt cable connector
Tyre inflator bottle with sealing agent
Replacement valve core
The valve remover 1
has a slot at its lower end which fits into the valve core.
This is the only way in which you can remove and re-install the valve core from
the tyre valve. The same also applies to the replacement valve core 11
.
Ð
ä 1
2
3
4
5
6
7
8
9
10
11 Preparing to use the breakdown kit
First read and observe the introductory information and safety warn-
ings on page 200.
The following preparatory work must be carried out before using the breakdown
kit.
›
In the event of a puncture, park the vehicle as far away as possible from the
flow of traffic. Park on as flat and firm a surface as possible.
› Let all of the occupants get out.
While changing a tyre, the occupants of the
vehicle should not stand on the road (instead they should remain behind a crash
barrier).
› Switch off the engine and move the gearshift lever into
Neutral or move the
selector lever
for the automatic gearbox into position P .
› Firmly apply the
handbrake.
› Check that you can carry out the repairs with the breakdown kit
» page 200.
› If a trailer is connected, remove it.
› Remove the breakdown kit
from the boot.
› Stick the sticker 2
»
Fig. 177 on page 201 on the dash panel in view of the driv-
er.
› Do not remove the foreign body, e.g. screw or nail, from the tyre.
› Unscrew the valve cap.
› Use the valve remover 1
to unscrew the valve core and place it on a clean sur-
face (rag, paper, etc.). Ð Sealing and inflating tyres
First read and observe the introductory information and safety warn-
ings on page 200.
Sealing
›
Forcefully shake the tyre inflator bottle 10
» Fig. 177
on page 201 several times.
› Firmly screw the inflation hose 3
onto the tyre inflator bottle 10
in a clockwise
direction. The film on the cap is pierced automatically.
› Remove the plug from the inflation hose 3
and plug the open end fully onto
the tyre valve.
› Hold the bottle 10
with the bottom facing upwards and fill all of the sealing
agent from the tyre inflator bottle into the tyre.
› Remove the empty tyre inflator bottle from the valve.
› Screw the valve core back into the tyre valve using the valve remover 1
.
£
ä
ä
201
Do-it-yourself
Inflating
›
Screw the tyre inflation hose 5
» Fig. 177
on page 201 of the air compressor
firmly onto the tyre valve.
› Check that the air release valve 7
is closed.
› Start the engine and run it in idle.
› Plug the connector 9
into 12 Volt socket »
page 84, Cigarette lighter, 12-volt
power socket.
› Switch on the air compressor with the ON and OFF switch 8
.
› Allow the air compressor to run until a pressure of 2.0 - 2.5 bar is achieved.
Maximum run time of 8 minutes » !
› Switch off the air compressor.
› If you cannot reach an air pressure of 2.0 – 2.5 bar, unscrew the tyre inflation
hose 5
from the tyre valve.
› Drive the vehicle 10 metres forwards or backwards to allow the sealing agent to
“distribute” in the tyre.
› Firmly screw the tyre inflation hose 5
back onto the tyre valve and repeat the
inflation process.
› If you cannot reach the required tyre inflation pressure here either, this means
the tyre has sustained too much damage. You cannot seal with tyre with the
breakdown kit » .
› Switch off the air compressor.
› Remove the tyre inflation hose 5
from the tyre valve.
Once a tyre inflation pressure of 2.0
– 2.5 bar is achieved, continue the journey at
a maximum speed of 80 km/h (50 mph).
Check the tyre inflation pressure after driving for 10 minutes » page 202.WARNING
■ During inflation, the tyre inflation hose and air compressor may get hot- risk
of injury! ■ Do not place the hot tyre inflation hose or hot air compressor on flammable
materials - risk of fire!
■ If you cannot inflate the tyre to at least 2.0 bar, this means the damage sus-
tained was too serious. The sealing agent cannot be used to seal the tyre. Do
not drive the vehicle. Get professional assistance! CAUTION
Switch off the air compressor after running 8 minutes at the latest - danger of
overheating! Allow the air compressor to cool a few minutes before switching it
on again. Ð Check after driving for 10 minutes
First read and observe the introductory information and safety warn-
ings on page 200.
Check the tyre inflation pressure after driving for 10 minutes!
If the tyre inflation pressure is 1.3 bar or less:
› Do not drive the vehicle!
You cannot properly seal with tyre with the break-
down kit.
› Get professional assistance.
If the tyre inflation pressure is 1.3 bar or more:
› Adjust the tyre inflation pressure to the correct value (see inside of fuel filler
cap).
› Continue driving carefully to the nearest ŠKODA specialist garage at a maxi-
mum speed of 80 km/h (50 mph). Ð Jump-starting
ä
Introduction
This chapter contains information on the following subjects:
Jump-starting 203
Jump-starting in vehicles with the START-STOP system 204
Jump-starting vehicles with the vehicle battery in the boot 204
The battery of another vehicle can be used to jump-start your vehicle if the en-
gine will not start because the battery is flat. Jump-start cables are required for
this purpose.
Both batteries must have a rated voltage of 12 V. The capacity (Ah) of the battery
supplying the power must not be significantly less than the capacity of the dis-
charged battery in your vehicle.
Jump-start cables
Only use jump-start cables which have an adequately large cross-section and in-
sulated terminal clamps. Observe the manufacturer's instructions.
Positive cable - colour coding in the majority of cases is red.
Negative cable - colour coding in the majority of cases is black. £
ä
202 Do-it-yourself
Fuses in the dash panel
Fig. 183
Fuse box cover/Schematic diagram of the fuse box
First read and observe the introductory information and safety warn-
ings on page 207.
The fuses are located on the left side of the dash panel behind a cover.
›
Remove the cover for the fuse box using a screwdriver
» Fig. 183.
› Replace the cover once the fuse has been changed.
Fuse assignment in the dash panel No. Power consumer
1 Diagnostic socket, engine control unit, fuel pump relay, fuel pump
control unit
2 Control unit for ABS, ESC, switch for the tyre control display, brake
sensor
3 Switch and airbag control unit
4 WIV, tail lights, dimming mirrors, pressure sensor, telephone preinstal-
lation
5 Control unit for headlight beam adjustment and headlight swivel, con-
trol unit for parking aid, control unit for park assist
6 Instrument cluster, control unit for electromechanical power steering,
Haldex, selector lever lock, power supply for data bus, AG
7 Valve heating, air mass meter
8 Control unit for trailer detection 9 Relay for auxiliary heating and ventilation
10 Adaptive left main headlight ä
No. Power consumer
11 Adaptive right main headlight
12 Not assigned
13 Diagnostic socket, light switch, rain sensor, clock
14 Central locking system and bonnet lid 15 Central control unit - interior lights
16 The air conditioning system 17 Not assigned
18 Phone 19 Instrument cluster, windscreen wiper lever, and turn signal lever
20 KESSY 21 KESSY ELV
22 Air blower for Climatronic
23 Front power window, central locking of the front doors
24 Selector lever lock, AG 25 Rear window heater, relay for auxiliary heating and ventilation
26 Power socket in the boot 27 Fuel pump relay, control unit for fuel pump, injection valves
28 Electric boot lid 29 AG, Haldex
30 Ventilated front seats 31 DVD pre-installation
32 Front power window, central locking system of the rear doors
33 Electric sliding/tilting roof
34 Alarm, spare horn 35 front and rear lighter
36 Headlight cleaning system 37 Heated front seats
38 Heated rear seats 39 Rear window wiper
40 Fan air-conditioning system, relay for auxiliary heating and ventilation 41 Not assigned
42 Light switch £208
Do-it-yourself
The first 1 500 km 158
Tyres 158
S
Safe securing system 29
Safety 140
Child safety 154
Child safety seats 154
Head restraints 70
ISOFIX 156
TOP TETHER 156
Save electrical energy 159
Seat Adjusting 67
Seat belt Indicator light 20
Seat belt height adjuster 147
Seat belts Belt tensioners 147
Cleaning 173
fastening and unfastening 146
Height adjustment 147
Seats folding forward 71
Head restraints 70
Heating 69
Ventilated front seats 69
Selector lever see selector lever positions 122
Selector lever positions 122
Service display 10
Setting Automatic dimming interior mirror 63
Manual air conditioning system 96
Manual dimming interior mirror 63
Steering wheel 104
Setting the clock Clock 11Shifting
Diving economically 159
Gearshift lever 112
Side airbag 151
Sliding/tilting roof see Electric sliding/tilting roof 43
Snow chains 193
Spare wheel 190
Speedometer 9
Stabilisation Control (ESC) 110
START/STOP Function 118
Starting engine Jump-starting 202
Starting the engine 103
START STOP Jump-starting 204
Steering force assistance 104
Steering wheel 104
Stopping off the engine 103
Storage 85
Storage compartments 85
Sun visors 58
Switching lights on and off 49
T
Taking care of the vehicle Artificial leather 172
Material coverings 172
Materials 172
Natural leather 172
Seat belts 173
Taking care of your vehicle 167
Automatic car wash system 168
Chrome parts 169
Cleaning the wheels 171
Door lock cylinders 170
Headlight lenses 170High-pressure cleaner 168
Plastic parts 169
Polishing the paintwork 169
Preservation 169
Rubber seals 170
Washing 168
Washing by hand 168
Wash system 168
TCS Function 111
Warning light 23
Technical data 216
Telephone 128, 131
Through-loading bag 90
Through-loading channel 89
Tilting roof see Electric sliding/tilting roof 43
Tiptronic 121
see automatic gearbox 123
Tool 196
TOP TETHER 156
Towing 204
Towing a trailer 164
Towing eye 205
Towing protection monitoring 34
Traction control system (TCS) 111
Trailer 164
Towing a trailer 164
Transport Boot 72
Roof rack system 81
Transporting children safely 154
Twindoor see Boot lid 36
Two-way radio systems 126
Type plate 216
Tyre repair 200
Tyres see Wheels and tyres 189
229
Index
U
Underbody protection 171
Unlocking Remote control 31
Uphill start assist 110
V
Vehicle battery Automatic load deactivation 186
Charging 185
Checking the electrolyte level 185
Operation in winter 185
Replacing 186
Safety instructions 182
Vehicle condition see Auto Check Control 18
Vehicle data sticker 216
Vehicle dimensions 218
Vehicle key 27
Vehicle tool kit 196
Visors 58
W
Warning symbols see Indicator lights 18
Warning triangle 195
Washing 167
Automatic car wash system 168
by hand 168
Chrome parts 169
High-pressure cleaner 168
Weights 216
Wheel bolts Anti-theft wheel bolt 199
Caps 191
Loosening and tightening 198
Wheels 187Wheels and tyres
Changing a wheel 196
Full wheel trim 191
General information 187
Handling wheels and tyres 189
new tyres 189
Service life of tyres 188
Snow chains 193
Spare wheel 190
Wheel bolts 193
Winter tyres 193
Window convenience operation 42
Windows De-icing 170
See electric power windows 40
Windscreen heating 58
see Radio reception 170
Windscreen washer fluid Checking 182
Indicator light 25
Replenishing 182
Winter 182
Windscreen washer system 182
Windscreen wipers 60
Windscreen wiper Automatic rear window wiper (Combi) 61
Replacing the rear window wiper blade 62
Replacing the windscreen wiper blades 62
Windscreen wipers Activating 60
Cleaning the windscreen wiper blades 62
Windscreen washer fluid 182
Winter operation Snow chains 193
Winter tyres see Wheels and tyres 193
230 Index