2012 SKODA PRAKTIK ECO mode

General information
Owner's Manual
This Owner's manual describes all possible equipment variants without identify-ing them as special equipment, model variants or market-dependent equipment.
Consequently, this vehicle does not need to contain all of the equipment compo-nents described in this Owner's manual.
The scope of equipment for your vehicle is described in the sales documentation you were given when purchasing the car. For more information, contact your localŠKODA retailer.Ð
Symbols in the text of the operating instructions
Explanation of symbolsÐ End of a section.
 The section is continued on the next page.Ð
Equipment overview
Control button›Switching radio on and off (press)›Volume control (rotate)Control button to activate the function Scan Button RADIO to activate the radio modeButton MEDIA to activate the play function of audio sourcesButtons  ›manual station finding, select the track in CD mode (press briefly)›fast station finding, fast forward/reverse in the CD mode (press for a long period of time)Button TP to activate the reception of traffic reportsButton MENU to call up the menu settings of the parameter for radio or CDplayer
1
2345
67
Function keys ›store and select the RDS station›Enter code›Call up the Stop menuButton  for adjusting the soundCD case CD - eject buttonÐ
Important information
Warranty
The equipment warranty terms and conditions also apply for new vehicles.
After the expiration of the warranty, a piece of equipment in need of repair will be replaced with a reconditioned, original item with spare part warranty. It is, howev-er, a precondition that the housing has not been damaged and no unauthorisedattempts have been made to carry out repairs.
Note
Damage within the meaning of the warranty must not be the result of improperhandling of the system or from unprofessional repair attempts. It is also essentialthat there is no external damage.Ð
Device operation
The unit should only be used, if the traffic situation permits it.
The volume settings must be selected in such a way that audible signals from the outside, e.g. a Martins horn from utility vehicles (police cars, ambulances and firebrigade), can be heard at all times.
WARNING
Please concentrate fully at all times on your driving! As the driver you are fullyresponsible for road safety. Only use the functions of the radio in such a waythat you are always in full control of your vehicle in all traffic situations!Ð
8
91011
2General information

SKM ›ALL - stops the station finding on all available stations;›PRESET - stops the station finding on the stored stations.
VOL Your radio stores the last volume set before switching off. If the value is higher,the volume is reduced to the value of the parameter ON VOLUME after switchingon the radio again.
GAL Your radio increases automatically its volume with the increasing vehicle speed. Ahigher setting value results in a stronger volume increase.
DIS Set the level of the backlighting for the display.
PHONE If your vehicle is equipped with a handsfree system, the monophone play functionof the mobile phone calls is carried out via the loudspeakers of the vehicle.
PDC AT If your vehicle is equipped with “parking aid”, the volume is automatically de-creased to a pre-defined value, when the “parking aid” is active.
›PDC AT0 - no volume restriction;›PDC AT1 - restricts the volume to a middle level;›PDC AT2 - restricts the volume to a low level;›PDC AT3 - Mute.
AUX Setting of the input sensitivity AUX VOL LEVEL:
›AUX VOL LEV 1 - high level, used in particular for notebooks;›AUX VOL LEV 2 - middle level, used for cassettes or CD player;›AUX VOL LEV 3 - low level, used for MP3 player.
Note
Each setting change is stored by changing to another menu point.Ð
Radio mode
Waveband switch-over
Your radio is equipped with FM and AM wavebands.
In the ranges FM1/FM2 and AM1/AM2 there are each 6 memory spaces available, in order to change, press the button RADIO briefly.Ð
The process of searching for and storing the radio stations
Manual search›Search the frequency of the desired radio station by turning the control button 2 .
Automatic station finding ›The radio searches for the next radio station in the selected waveband bypressing the button  or  briefly.
Function SCAN›The radio stations of the current waveband are briefly played (10 seconds) bypressing the control button 2 or by pressing the button MENU and tapping thefunction key SCN afterwards.›This function is ended by pressing the button 2 once again and the currentstation is replayed.
Function AS›Press the button MENU and then the button AS. An automatic station finding isstarted during which the 6 stations with the strongest signal in the memory lev- el FM1 and/or AM1 are stored.
Store station›After selecting the radio station, hold the station key 8 , on which it should bestored until it briefly switches to mute and a brief signal sounds.Ð
RDS functions
Certain radio stations transmit additional text information - designated as radiotext.
4General information

CD player
Using the system
Inserting the CD
›Press the button MEDIA, in order to select the source for the play function: CD(internal CD drive), EXT (CD changer, if it is connected to the radio) or AUX.›Carefully insert a CD into the CD case 10 until it is automatically drawn in. Theplay function begins automatically.Ð
Operating the CD player
Select track›Press the button  or  during the play function of the CD, in order to selectthe previous and/or the next title.›Press the button  or  longer for fast replay of the track (reverse or forward).The play function is continued after releasing the button.›Press the relevant station key 8 (valid for MP3 data) for scrolling in the foldersor in the play lists (if they are present on the CD).
Function SCAN ›Press the button 2, in order to scroll through the CD. The first 10 seconds ofeach title are played.›In order to return to the normal mode, press once again the button 2.›Press the button  or  if you wish to select the previous or the followingtrack.
End the play function of the CD›In order to end the play function of the CD and to activate the radio, press thebutton RADIO.
Ejecting CD›Press the button 11, the CD is ejected.
Display of additional information (MP3 data) In the display, you can select the display of additional information via the MP3 da-ta using the function key INF.
Note
■If the ejected CD is not removed, it is drawn in again for safety reasons.■If the radio is functioning in the TP mode before changing to the CD mode, theplay function of the CD is interrupted during the traffic reports and the unitswitches over to the radio mode. After the traffic reports have ended, the unitswitches back once again to the CD mode.Ð
Replay the tracks in random order
›Select a function of the MIX menu with the help of the station keys.
MIXPlay function of titles in random order.
›MIX OFF - the function of the menu is switched off;›MIX CD - Plays the tracks on a CD in random order;›MIX FLD - Play function of titles in random order in a certain (folder);›MIX PLS - Play function of the playlist (folder of selected tracks from individual folders, which is stored on the CD). Is only displayed when a playlist is createdfor the replayed CD.Ð
General information for MP3 operation
Requirements for the MP3 data and data carrier›CD-ROM, CD-R, CD-RW with a capacity of 650 MB and 700 MB.›The CDs must correspond to the ISO 9660 Level 2 standard as well as the Jolietdata system (single and multi-session).›Data names must be no longer than 64 characters.›The list structure is restricted to a depth of 8 list levels.›The name of the artist, the album and the title of the reproduced MP3 data canbe shown as ID3 tag, providing this information is available. The list and dataname will be displayed if there is no ID3 tag.›Playlists are not supported.
Bit rate (data flow per time unit)›The system supports MP3 data with bit rates of 32 to 320 KB/s as well as MP3data with variable bit rates.›The indicated playing time data with variable bit rates is not reliable.Ð
6CD player