Wheel trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248
Changing a wheel . . . . . . . . . . . . . . . . . . . . . . . . . 250
Anti-puncture kit* . . . . . . . . . . . . . . . . . . . . . . . . . 256
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261
Changing bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
Starting assistance . . . . . . . . . . . . . . . . . . . . . . . . 273
Towing and tow starting . . . . . . . . . . . . . . . . . . . . 276
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . 280
Description of specifications . . . . . . . . . . . . . . . 280
Technical specifications . . . . . . . . . . . . . . . . . . . . 280
Engine specifications . . . . . . . . . . . . . . . . . . . . . . 283
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
Capacities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 291
4Table of Contents
261
Practical information
Fuses
Introduction
Due to the constant update of vehicles, fuse assignments depending on
equipment and the use of the same fuse for various electrical components,
at the time of printing this manual it is not possible to provide an up-to-date
summary of the electrical components fuse positions. For detailed informa-
tion about the fuse positions, please consult a Technical Service.
In general, a fuse can be assigned to various electrical components. Like-
wise, an electrical component can be protected by several fuses.
Only replace fuses when the cause of the problem has been solved. +If a
newly inserted fuse blows after a short time, you must have the electrical
system checked by a Specialised workshop as soon as possible.
Additional information and warnings:
● Working in the engine compartment ⇒ page 180
WARNING
The high voltages in the electrical system can give serious electrical
shocks, causing burns and even death!
● Never touch the electrical wiring of the ignition system.
● Take care not to cause short circuits in the electrical system.
WARNING
Using unsuitable fuses, repairing fuses or bridging a current circuit with-
out fuses can cause a fire and serious injury.
● Never use a fuse with a higher value. Only replace fuses with a fuse of
the same amperage (same colour and markings) and size.
● Never repair a fuse.
● Never replace a fuse by a metal strip, staple or similar.
CAUTION
● To avoid damage to the vehicles electric system, before replacing a fuse
turn off the ignition, the lights and all electrical elements and remove the
keys from the ignition.
● If you replace a fuse with higher-rating fuse, you could cause damage to
another part of the electrical system.
● Protect the fuse boxes when open to avoid the entry of dust or humidity.
Dirt and humidity inside fuse boxes can cause damage to the electrical sys-
tem.
Note
One single consumer could have more than one fuse.
Note
Several consumers could run over one single fuse.
Vehicle diagramPrior to a journey...While drivingCare, cleaning and mainte-
nanceIf and whenTechnical Data
262Practical information
Vehicle fuses
Fig. 147 Below the driv-
er side dash panel: fuse
box cover
Fig. 148 In the engine
compartment: fuse box
cover
Only replace fuses with a fuse of the same amperage (same colour and
markings) and size. Identifying fuses situated below the driver-side dash panel by colours
ColourAmp ratingPurple3Light brown5Brown7,5Red10Blue15Yellow20White or transparent25Green30Orange40
Opening and closing the fuse box situated below the dash panel
●
Opening: press the unlock button ⇒ Fig. 147 1 until it is possible to
open the cover.
● Fold the cover down.
● Closing: fold the cover up in the opposite direction to the arrow until it
clicks into the locking lever 1
.
Opening the engine compartment fuse box
● Open the bonnet ⇒ page 180.
● Press the attachment tabs in the direction indicated by the arrow (thin
arrows) to release the fuse box cover ⇒ Fig. 148.
● Then lift the cover out.
● To fit the cover, place it on the fuse box. Push the attachment tabs
down, in the opposite direction indicated by the arrow until they click audi-
bly into place.
263
Practical information
CAUTION
● Always carefully remove the fuse box covers and refit them correctly to
avoid problems with your vehicle.
● Protect the fuse boxes when open to avoid the entry of dust or humidity.
Dirt and humidity inside fuse boxes can cause damage to the electrical sys-
tem.
Note
In the vehicle, there are more fuses than those indicated in this chapter.
These should only be changed by a Specialised workshop.
Replacing a blown fuse
Fig. 149 Image of a
blown fuse
Preparation
● Switch off the ignition, lights and all electrical equipment.
● Open the corresponding fuse box ⇒ page 262. Identifying a blown fuse
A fuse is blown if its metal strip is ruptured
⇒ Fig. 149.
Point a lamp at the fuse. This will make it easier to see if the fuse is blown.
To replace a fuse
● Remove the fuse.
● Replace the blown fuse for one with an identical amperage rating (same
colour and markings) and identical size ⇒
.
● Replace the cover again or close the fuse box lid.
CAUTION
If you replace a fuse with higher-rating fuse, you could cause damage to an-
other part of the electrical system.
Vehicle diagramPrior to a journey...While drivingCare, cleaning and mainte-
nanceIf and whenTechnical Data
264Practical information
Changing bulbs
Introduction
Changing bulbs requires a certain amount of manual skill. If you are unsure,
SEAT recommends that you consult a Technical Service or request assis-
tance from a specialist. In general a specialist is needed if, in addition to
the bulbs, other vehicle components require removal.
You should store spare light bulbs in the vehicle for safety-relevant lights.
Spare bulbs may be obtained from the Official dealers and workshops. In
some countries, it is a legal requirement to carry spare bulbs in the vehicle.
Driving with faults and blown bulbs on the vehicle exterior lighting is
against the law.
Additional bulb specifications
The specifications of some headlamp bulbs and bulbs for the tail lamps fit-
ted at the factory may be different to those of conventional bulbs. Bulb in-
formation is displayed on the bulb socket or on the bulb itself.
Additional information and warnings:
● Exterior detail ⇒ page 6
● Lights and visibility ⇒ page 84
● Working in the engine compartment ⇒ page 180
● Vehicle tools ⇒ page 246
● Fuses ⇒ page 261
WARNING
If the road is not well-lit and the vehicle is not clearly visible to other
drivers, there is a risk of accident.
WARNING
Failure to replace bulbs correctly may cause serious accidents.
● Before carrying out any work in the engine compartment please read
and observe the warnings ⇒ page 180. In any vehicle, the engine com-
partment is a hazardous area and could cause severe injury.
● The bulbs H4, HB4 and H7 are pressurised and might explode on
changing them.
● Only replace the bulbs concerned when they have cooled.
● Never replace bulbs alone if you are not familiar with the operations
necessary. If you are not sure about procedures then visit a Specialised
workshop to carry out the necessary work.
● Never touch the bulb glass directly. Fingerprints will be evaporated by
the heat of the operating bulb thus “fogging” up the reflector.
● The headlamp frameworks in the engine compartment and the tail
lamps contain sharp elements. Always protect your hands when chang-
ing bulbs.
CAUTION
After changing a bulb, if the rubber covers are not replaced correctly on the
headlamp framework, the electrical installation may be damaged, especial-
ly if water is allowed to enter.
265
Practical information
Information for replacing bulbs
Checklist
To replace a bulb, carry out the following operations always in the order giv-
en ⇒
:
1. Park the vehicle a safe distance from traffic and on suitable ground.
2. Apply the handbrake firmly ⇒ page 134.
3. Turn the light switch to position 0 ⇒ page 84.
4. Move the gear lever into the neutral position ⇒ page 84.
5. Stop the engine and remove the key from the ignition ⇒ page 119.
6. Automatic gearbox: move the selector lever to position P
⇒ page 124.
7. Manual gearbox: Select a gear ⇒ page 124.
8. Allow the corresponding bulb to cool.
9. Visually inspect fuses to see if any are blown ⇒ page 261.
10. Replace the bulb according to the instructions ⇒
. Bulbs should
only be replaced by new identical models. Bulb information is dis-
played on the bulb socket or on the bulb itself.
11. In general, never touch the bulb glass directly. The heat of the bulb would cause the fingerprint to evaporate and condense on the reflec-
tor. This will impair the brightness of the headlight.
12. Check if the new bulb is working. If the bulb is not working, it maynot have been correctly fitted, it could be damaged or the connector
may not be correctly connected.
13. Every time a bulb for the headlights is replaced, visit a specialised workshop to check the headlights.
WARNING
Failure to follow the checklist prepared for your own safety could lead to
accidents and severe injuries.
● Always complete the operations given in the checklist and observe
the general rules of safety.
CAUTION
Always remove and fit headlights carefully to avoid damage to the paint-
work and other vehicle parts.
Vehicle diagramPrior to a journey...While drivingCare, cleaning and mainte-
nanceIf and whenTechnical Data
Fault finding . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
Fault memoryConnector . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 Air conditioner . . . . . . . . . . . . . . . . . . . . . . 168
Fire extinguisher . . . . . . . . . . . . . . . . . . . . . . . . 242
First-aid kit Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
First aid kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 see First aid kit . . . . . . . . . . . . . . . . . . . . . . 242
Floor mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Fluids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Fog lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Frequently asked questions . . . . . . . . . . . . . . 238
Front airbags See "Airbag system" . . . . . . . . . . . . . . . . . . 72
Front passenger airbag Deactivating using the key switch . . . . . . . . 73
See "Airbag system" . . . . . . . . . . . . . . . . . . 67
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177 Information on consumption . . . . . . . . . . . 282
Petrol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177
Type of fuel . . . . . . . . . . . . . . . . . . . . . . . . . 177
Fuel consumption Economic driving . . . . . . . . . . . . . . . . . . . . 144
¿Why does it increase? . . . . . . . . . . . . . . . . 236
Fuel gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Control lamp . . . . . . . . . . . . . . . . . . . . . . . . 172
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172
Refuelling . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Fuel tank flap
close . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Petrol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 261 Fuse box . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
Identifying blown fuses . . . . . . . . . . . . . . . 263
Identifying by colours . . . . . . . . . . . . . . . . 262
Preparation before replacing . . . . . . . . . . . 263
Replacement . . . . . . . . . . . . . . . . . . . . . . . . 263
G Glove compartment see Compartments . . . . . . . . . . . . . . . 110, 111
H Handbrake . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Hazard warning lights system . . . . . . . . . . . . . 240
Headlamp range adjustment . . . . . . . . . . . . . . . 11
Headlight range control . . . . . . . . . . . . . . . . . . . 88
Headlights Driving abroad . . . . . . . . . . . . . . . . . . . . . . . 87
Headlight washers . . . . . . . . . . . . . . . . . . . . 92
Heated rear window . . . . . . . . . . . . . . . . . . . . . 167
Heated seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Heating and ventilation system Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
see also Air conditioning system . . . . . . . 164
High pressure cleaning apparatus . . . . . . . . . 199
Hill-start aid . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 Hill hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Control lamp . . . . . . . . . . . . . . . . . . . . . . . . 160
Start-Stop system . . . . . . . . . . . . . . . . . . . . 161
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . 160
Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
I
Identification number . . . . . . . . . . . . . . . . . . . 281
Identification plate . . . . . . . . . . . . . . . . . . . . . . 281
Ignition See "Engine and ignition" . . . . . . . . . . . . . 119
Ignition key see vehicle key . . . . . . . . . . . . . . . . . . . . 29, 30
Ignition lock . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Safety interlock . . . . . . . . . . . . . . . . . . . . . . 121
Unauthorised vehicle key . . . . . . . . . . . . . 120
Immobilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122 Operating fault . . . . . . . . . . . . . . . . . . . . . . 119
In case of a breakdown Securing the vehicle . . . . . . . . . . . . . . . . . 240
In case of an emergency Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
Hazard warning lights system . . . . . . . . . . 240
In case of a breakdown . . . . . . . . . . . . . . . 240
Protecting yourself and securing the vehi-cle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
In case of emergency . . . . . . . . . . . . . . . . . . . . 240
Indicator Checking the engine oil level . . . . . . . . . . 185
Engine oil pressure . . . . . . . . . . . . . . . . . . 185
Information on consumption . . . . . . . . . . . . . . 282
296 Index