2012 RENAULT PULSE brake


> (GLW    0RGHO .$2(0B5HQDXOW @
6-10In case of emergency
Do not attempt to start the engine by p\fshing the
vehicle\b
CAUTION:
.Automatic Transmission (AT)/Continuously
Variable Transmission (CVT) model cannot
be started by pushing. Attempting to do so
may cause damage to the transmission.
. Three-way catalyst equipped model should
not be started by pushing. Attempting to do
so may cause damage to the catalyst.
. Never try to start the engine by towing.
When the engine starts, the forward surge
could cause the vehicle to collide with the
towing vehicle.
. Stop/Start (Idling Stop) System equipped
model cannot be started by pushing the
vehicle.
WARNING:
.Never continue driving if your vehicle over-
heats. Doing so could cause a vehicle fire.
. Never open the hood if steam is coming out.
. Never remove the radiator cap while the
engine is hot. If the radiator cap is removed
when the engine is hot, pressurized hot
water will spurt out and possibly cause
burning, scalding or serious injury.
. If steam or coolant is coming from the
engine, stand clear of the vehicle to prevent
getting burned.
. Be careful not to allow your hands, hair,
jewelry or clothing to come into contact with,
or to get caught in the cooling fan or drive
belts. The engine cooling fan will start at any
time.
If yo\fr vehicle is overheating (indicated by the high
temperat\fre indicator) , or if yo\f feel a lack of engine
power, detect \fn\fs\fal noise, etc\b, take the following
steps:
1\b Safely move the vehicle off the road away from traffic\b
2\b T\frn on the hazard indicator flasher lights\b
3\b Apply the parking brake\b
4\b A\ftomatic Transmission (AT)/Contin\fo\fsly Vari- able Transmission (CVT) model: Move the selector
lever to the “P” (Park) position\b
Man\fal Transmission (MT) model: Move the shift
lever to the “N” (Ne\ftral) position\b
DO NOT STOP THE ENGINE . 5\b Open all windows\b
6\b T\frn off the air conditioner\b Set the temperat\fre
control to maxim\fm hot and fan control to
maxim\fm speed\b
7\b Get o\ft from the vehicle\b
8\b Vis\fally inspect and listen for steam or coolant escaping from the radiator before opening the
hood\b Wait \fntil no steam or coolant can be seen
before proceeding\b
9\b Open the engine hood\b
10\b Vis\fally inspect if the cooling fan is r\fnning\b
11\b Vis\fally inspect the radiator and radiator hoses for leakage\b
If the cooling fan is not r\fnning or the coolant is
leaking, stop the engine\b
12\b After the engine cools down, check the coolant level in the reservoir with the engine r\fnning\b Do
not open the radiator cap.
13\b Add coolant to the reservoir if necessary\b
Have yo\fr vehicle inspected/repaired at a RENAULT
dealer\b
PUSH STARTING IF YOUR VEHICLE OVERHEATS
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
6-12In case of emergency
Manual Transmission (MT) model\f
1. Place \bhe igni\bion swi\bch in \bhe “OFF” posi\bion.
2. Secure \bhe s\beering wheel in a s\braigh\b-aheadposi\bion wi\bh rope or a similar device.
3. Move \bhe shif\b lever \bo \bhe “N” (Neu\bral) posi\bion.
4. Release \bhe parking brake.
5. A\b\bach safe\by chains whenever \bowing.
Rear wheels on the ground:
1. Place \bhe igni\bion swi\bch \bo \bhe “OFF” posi\bion.
2. Secure \bhe s\beering wheel in a s\braigh\b-ahead posi\bion wi\bh rope or a similar device.
3. Move \bhe shif\b lever \bo \bhe “N” (Neu\bral) posi\bion.
4. Release \bhe parking brake.
5. A\b\bach safe\by chains whenever \bowing.
All four wheels on the ground:
CAUTION:
Never tow AT/CVT model with all four wheels on
the ground. Doing so will cause serious and
expensive damage to the transmission.
Manual Transmission (MT) model\f
1. Place \bhe igni\bion swi\bch in \bhe “OFF” posi\bion.
2. Move \bhe shif\b lever \bo \bhe “N” (Neu\bral) posi\bion.
3. Release \bhe parking brake.
Freeing \brapped vehicle
WARNING:
. Never allow anyone to stand near the towing
line during the pulling operation.
. Never spin the tires at high speed. This could
cause them to explode and result in serious
injury. Parts of the vehicle could also over-
heat and be damaged.
. Do not pull the vehicle using the rear hook.
The rear hook is not designed to pull the
vehicle out in the event that the vehicle
becomes trapped.
In \bhe even\b \bha\b your vehicle’s \bires become \brapped in
sand, snow, or mud, and \bhe vehicle is unable \bo free
i\bself wi\bhou\b being pulled, use \bhe recovery hooks.
. Use \bhe recovery hooks only. Do no\b a\b\bach \bhe
pulling device \bo any o\bher par\b of \bhe vehicle body.
O\bherwise, \bhe vehicle body may be damaged.
. Use \bhe recovery hooks \bo free a vehicle only.
Never \bow a vehicle using only \bhe recovery hooks.
. The recovery hooks are under \bremendous s\bress
when used \bo free a \brapped vehicle. Always pull
\bhe pulling device s\braigh\b ou\b from \bhe vehicle.
Never pull on \bhe recovery hooks a\b an angle. Front:
JVE0037XType A (except for Sports version)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
8 Maintenance and do-it-yourself
Maintenance requirements ..................\d..................\d..................\d.............. 8-2Schedu\fed maintenance ..................\d..................\d.....................\d......... 8-2
Genera\f maintenance ..................\d..................\d..........................\d......... 8-2
Where to \bo for service ..................\d..................\d.....................\d......... 8-2
Genera\f maintenance ..................\d..................\d..................\d........................ 8-2 Exp\fanation of \benera\f maintenance items ..................\d............... 8-2
Maintenance precautions ..................\d..................\d..................\d.......... 8-4
En\bine compartment check \focations ..................\d..................\d............ 8-5 HR12DDR en\bine mode\f ..................\d..................\d..................\d.......... 8-5
HR12DE en\bine mode\f ..................\d..................\d...............................\d 8-6
HR15DE en\bine mode\f ..................\d..................\d...............................\d 8-7
K9K en\bine mode\f ..................\d..................\d...............................\d......... 8-8
En\bine coo\fin\b system ..................\d..................\d..........................\d............. 8-8 Checkin\b en\bine coo\fant \feve\f ..................\d..................\d.................. 8-9
Chan\bin\b en\bine coo\fant ..................\d..................\d..................\d.......... 8-9
En\bine oi\f ..................\d..................\d..................\d............................\d.............. 8-10 Checkin\b en\bine oi\f \feve\f ..................\d..................\d..................\d....... 8-10
Chan\bin\b en\bine oi\f and oi\f fi\fter ..................\d..................\d........... 8-10
Protect environment ..................\d..................\d..................\d................ 8-14
Fue\f fi\fter (diese\f en\bine mode\f) ..................\d..................\d................... 8-15 Drainin\b water ..................\d..................\d...............................\d.............. 8-15
B\feedin\b fue\f system ..................\d..................\d..................\d............... 8-15
Drive be\fts ..................\d..................\d...............................\d..................\d......... 8-15
Spark p\fu\bs (\baso\fine en\bine mode\f) ..................\d..................\d......... 8-16 Iridium-tipped spark p\fu\bs (if equipped) ..................\d............... 8-16
Nicke\f-tipped spark p\fu\bs (if equipped) ..................\d................ 8-17
Brakes ..................\d..................\d..........................\d..................\d..................\d.... 8-17 Checkin\b parkin\b brake ..................\d..................\d.....................\d...... 8-17
Checkin\b foot brake peda\f ..................\d..................\d..................\d.... 8-17
Brake booster ..................\d..................\d...............................\d.............. 8-18
Brake f\fuid ..................\d..................\d...............................\d..................\d......... 8-18 C\futch f\fuid (if equipped) ..................\d..................\d.....................\d.......... 8-19
Automatic Transmission F\fuid (ATF) (if equipped) ..................\d.... 8-19
Continuous\fy Variab\fe Transmission (CVT) f\fuid
(if equipped) ..................\d..................\d...............................\d..................\d..... 8-20
Air c\feaner fi\fter ..................\d..................\d.....................\d..................\d......... 8-20
Wiper b\fades ..................\d..................\d..................\d............................\d...... 8-20
Windshie\fd wiper b\fades ..................\d..................\d....................... 8-20
Rear window wiper b\fade (if equipped) ..................\d.............. 8-21
Window washer f\fuid ..................\d..................\d..................\d.................... 8-22
Battery ..................\d..................\d..................\d.......................\d..................\d..... 8-23 Vehic\fe battery ..................\d..................\d..................\d..................\d...... 8-23
Remote contro\f\fer battery ..................\d..................\d..................\d.... 8-24
Inte\f\fi\bent key battery ..................\d..................\d..................\d............ 8-25
Variab\fe vo\fta\be contro\f system (if equipped) ..................\d............ 8-26
Fuses ..................\d..................\d..................\d..................\d..................\d............. 8-26 En\bine compartment ..................\d..................\d.....................\d.......... 8-26
Passen\ber compartment ..................\d..................\d........................ 8-27
Li\bhts ..................\d..................\d..........................\d..................\d..................\d.... 8-28 Head\fi\bhts ..................\d..................\d..........................\d..................\d..... 8-28
Exterior \fi\bhts ..................\d..................\d.....................\d..................\d..... 8-29
Interior \fi\bhts ..................\d..................\d...............................\d.............. 8-29
Li\bht \focations ..................\d..................\d..................\d..................\d...... 8-30
Tires and whee\fs ..................\d..................\d..................\d..................\d.......... 8-34 Tire inf\fation pressure ..................\d..................\d..................\d........... 8-34
Types of tires ..................\d..................\d.....................\d..................\d..... 8-34
Tire chains ..................\d..................\d..........................\d..................\d..... 8-34
Tire rotation ..................\d..................\d..................\d.......................\d...... 8-34
Tire wear and dama\be ..................\d..................\d.....................\d...... 8-35
Tire a\be ..................\d..................\d...............................\d..................\d..... 8-35
Chan\bin\b tires and whee\fs ..................\d..................\d................... 8-35
Whee\f ba\fance ..................\d..................\d...............................\d.......... 8-35
Spare tire ..................\d..................\d..................\d.......................\d.......... 8-35
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Tires*:
Check the pressure with a gauge often and alwa\fs
prior to long distance trips. If necessar\f, ad\bust the
pressure in all tires, including the spare, to the
pressure specified. Check carefull\f for damage, cuts
or excessive wear.
Tire rotation*:
Tires should be rotated ever\f 10,000 km (6,000
miles) . However, the timing for tire rotation ma\f var\f
according to \four driving habits and the road surface
conditions.
Wheel alignment and balance (for Europe):
If the vehicle should pull to either side while driving on
a straight and level road, or if \fou detect uneven or
abnormal tire wear, there ma\f be a need for wheel
alignment.
If the steering wheel or seat vibrates at normal highwa\f
speeds, wheel balancing ma\f be needed.
Windshield:
Clean the windshield on a regular basis. Check the
windshield at least ever\f six months for cracks or other
damage. Have a damaged windshield repaired b\f a
qualified repair facilit\f.
Wiper blades*:
Check for cracks or wear if the\f do not wipe properl\f.
Inside vehicle
The maintenance items listed here should be checked
on a regular basis, such as when performing periodic
maintenance, cleaning the vehicle, etc.Accelerator pedal:
Check the pedal for smooth operation and make sure
that the pedal does not catch or require uneven effort.
Keep the floor mats awa\f from the pedal.
Brake pedal*:
Check the pedal for smooth operation and make sure
that it has the proper distance under it when
depressed full\f. Check the brake booster function.
Keep the floor mats awa\f from the pedal.
Parking brake*:
Check that the pedal/lever has the proper distance of
travel.
Seat belts:
Check that all parts of the seat belt s\fstem (for
example, buckles, anchors, ad\busters and retractors)
operate properl\f and smoothl\f, and that the\f are
installed securel\f. Check the belt webbing for cuts,
fra\fing, wear or damage.
Steering wheel:
Check for changes in the steering conditions, such as
excessive free pla\f, hard steering or strange noises.
Warning lights and chimes:
Make sure that all warning lights and chimes are
operating properl\f.
Windshield defogger:
Check that the air comes out of the defogger outlets
properl\f and in good quantit\f when operating the
heater or air conditioner.
Windshield wiper and washer*:
Check that the wipers and washer operate properl\f
and that the wipers do not streak.
Under hood and vehicle
The maintenance items listed here should be checked
periodicall\f (for example, each time \fou check the
engine oil or refuel) .
Battery*:
Check the fluid level in each cell. It should be between
the UPPER and LOWER levels. Vehicles operated in
high temperatures or under severe conditions require
frequent checks of the batter\f fluid level.
Brake and clutch fluid level*:
Make sure that the brake and clutch fluid level is
between the MAX and MIN lines on the reservoir.
Engine coolant level*:
Check the coolant level when the engine is cold.
Engine drive belts*:
Make sure the drive belts are not fra\fed, worn, cracked
or oil\f.
Engine oil level*:
Check the level on the dipstick after parking the vehicle
on a level surface and turning off the engine.
Fluid leaks:
Check under the vehicle for fuel, oil, water or other fluid
leaks after the vehicle has been parked for a while.
Water dripping from the air conditioner after use is
normal. If \fou should notice an\f leaks or if fuel fumes
are evident, check for the cause and have it corrected
immediatel\f.
Maintenance and do-it-yourself8-3
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
8-4Maintenance and do-it-yourself
Window washer fluid*:
Check that there is adequate fluid in the reser\foir.
M\bINTEN\bNCE PREC\bUTIONS
When performing any inspection or maintenance work
on your \fehicle, always take care to pre\fent serious
accidental injury to yourself or damage to the \fehicle.
The following are general precautions which should be
closely obser\fed.
WARNING:
.Park the vehicle on a level surface, apply the
parking brake securely and block the wheels
to prevent the vehicle from moving. Move
the selector lever to the “P”(Park) position
or the shift lever to the “N”(Neutral) position.
. Be sure the ignition switch is in the “OFF”or
“LOCK” position when performing any parts
replacement or repairs.
. Do not work under the hood while the
engine is hot. Always turn off the engine
and wait until it cools down.
. If you must work with the engine running,
keep your hands, clothing, hair and tools
away from moving fans, belts and any other
moving parts.
. It is advisable to secure or remove any loose
clothing and any jewelry, such as rings,
watches, etc. before working on your vehi-
cle.
. If you must run the engine in an enclosed
space such as a garage, be sure there is
proper ventilation for exhaust gases to
escape. .
Never get under the vehicle while it is
supported by a jack.
. Keep smoking materials, flame and sparks
away from fuel and the battery.
. Never connect or disconnect either the
battery or any transistorized component
connector while the ignition switch is in the
“ON” position.
. On gasoline engine models with the Multi-
port Fuel Injection (MFI) system, the fuel
filter and fuel lines should be serviced by a
RENAULT dealer because the fuel lines are
under high pressure even when the engine is
turned off.
. Your vehicle is equipped with an automatic
engine cooling fan. It may come on at any
time without warning, even if the ignition
switch is in the “OFF” position and the
engine is not running. To avoid injury, always
disconnect the negative battery cable before
working near the fan.
. Always wear eye protection whenever you
work on your vehicle.
. Never leave the engine or the transmission
related component harness connector dis-
connected while the ignition switch is in the
“ON” position.
. Avoid direct contact with used engine oil and
coolant. Improperly disposed engine oil,
engine coolant, and/or other vehicle fluids
can hurt the environment. Always conform to
local regulations for disposal of vehicle
fluids.
This “8. Maintenance and do-it-yourself” section
pro\fides instructions regarding only those items which are relati\fely easy for an owner to perform.
You should be aware that incomplete or improper
ser\ficing may result in operating difficulties or ex-
cessi\fe emissions, and could affect your warranty
co\ferage.
If in doubt about any servicing, have it
done by a RENAULT dealer.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
8-6Maintenance and do-it-yourself
HR12DE ENGINE MODEL
JVC011\fX
1. En\bine drive belts
2. Brake and clutch* fluid reservoir— Ri\bht-Hand Drive (RHD) model
3. En\bine oil filler cap
4. Air cleaner
5. Brake and clutch* fluid reservoir — Left-Hand Drive (LHD) model
6. Fuse/fusible link box \f. Window washer fluid reservoir
8. En\bine oil dipstick
9. Radiator cap
10. Battery
11. En\bine coolant reservoir
*: For Manual Transmission (MT) Model
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
HR15DE ENGINE MODEL
JVC0118X
1. E\fgi\fe \brive belts
2. Brake a\f\b clutch* flui\b reservoir— Right-Ha\f\b Drive (RHD) mo\bel
3. E\fgi\fe oil filler cap
4. Air clea\fer
5. Brake a\f\b clutch* flui\b reservoir — Left-Ha\f\b Drive (LHD) mo\bel
6. Fuse/fusible li\fk box 7. Wi\f\bow washer flui\b reservoir
8. E\fgi\fe oil \bipstick
9. Ra\biator cap
10. Battery
11. E\fgi\fe coola\ft reservoir
*: For Ma\fual Tra\fsmissio\f (MT) Mo\bel
Maintenance and do-it-yourself8-7
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
8-10Maintenance and do-it-yourself
.Avoid direct skin contact with used coolant.
If skin contact is made, wash thoroughly
with soap or hand cleaner as soon as
possible.
. Keep coolant out of reach of children and
pets.
Engine coolant must be dis\fosed of \fro\ferly\b Check
your local regulations\bCHECKING ENGINE OIL LEVEL
SDI2572HR12DDR, HR12DE and HR15DE engine
SDI2713K9K engine1\b Park the vehicle on a level surface and a\f\fly the \farking brake\b
2\b Start the engine and warm it u\f until the engine tem\ferature reaches the normal o\ferating tem-
\ferature (a\f\froximately 5 minutes) \b
3\b Sto\f the engine\b
4\b Wait at least 10 minutes for the engine oil to drain back to the oil \fan\b
5\b Remove the di\fstick and wi\fe it clean\b 6\b Reinsert the di\fstick all the way\b
7\b Remove the di\fstick and check the oil level\b It
should be within the range
*C\b
8\b If the oil level is below
*A, remove the oil filler ca\f
and \four the recommended oil into the o\fening\b
Do not overfill
*B\b
When filling the engine oil, do not remove
the dipstick.
9\b Recheck the oil level with the di\fstick\b
It is normal to add some oil between oil
maintenance intervals or during the break-in
period, depending on the severity of operat-
ing conditions.
CAUTION:
The oil level should be checked regularly.
Operating your vehicle with an insufficient
amount of oil can damage the engine, and such
damage is not covered by warranty.
CHANGING ENGINE OIL AND OIL FILTER
WARNING:
.Used oil must be disposed of properly. Never
pour or dump oil into the ground, canals,
rivers, etc. It should be disposed of at proper
waste facilities. RENAULT recommends hav-
ing your oil changed by a RENAULT dealer.
. Be careful not to burn yourself, as the
engine oil may be hot.
. Prolonged and repeated contact with used
engine oil may cause skin cancer.
. Avoid direct skin contact with used oil. If
contacted, wash thoroughly with soap or
ENGINE OIL
&RQGLWLRQ