2012 RENAULT PULSE battery


> (GLW    0RGHO .$2(0B5HQDXOW @
RPT TRACK: The CD player plays the curre\ft track
co\fti\fuously\b
RPT ALL: All the tracks o\f the CD will be played i\f
seque\ftial order\b
MIX DISC: All the tracks o\f the CD will be played i\f a
ra\fdom order\b
CD EJECT button:
Whe\f the
butto\f is pushed while a CD is loaded,
the CD will be ejected\b
Whe\f the
butto\f is pushed twice, the CD will be
ejected further, a\fd the CD ca\f be removed with ease\b
If a CD is ejected by pushi\fg the
butto\f, a\fd it is
\fot take\f out from the loadi\fg slot, the CD will
automatically be reloaded to the slot to protect the CD\b
AUX button:
The AUX IN jack is located o\f the audio u\fit\b The AUX
IN audio i\fput jack accepts a\fy sta\fdard a\falog audio
i\fput such as from a portable cassette tape/CD player,
MP3 player, laptop computers, etc\b
Push the AUX butto\f to play a compatible device whe\f
it is plugged i\fto the AUX IN jack\b
CAUTION:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio operatio\f
JVH0004X
The audio system operates whe\f the ig\fitio\f switch is
i\f the “ACC” or “ON” positio\f\b
FM-AM button:
Whe\f the
butto\f is pushed while the audio
system is off, the audio system will tur\f o\f a\fd the
radio will tur\f o\f\b Whe\f the
butto\f is pushed
while CD is already operati\fg, it will automatically tur\f
off, a\fd the radio will tur\f o\f\b
To cha\fge the radio ba\fds, push the
butto\f u\ftil
the desired ba\fd appears\b
FM 1 ?FM 2 ?FM T ?MW ?LW
Duri\fg FM receptio\f, whe\f the
butto\f is pushed
for lo\fger tha\f 1\b5 seco\fds, statio\fs are searched for
a\fd the 6 statio\fs of the FM T ba\fd\b The sou\fd is
muted u\ftil the auto store operatio\f is completed,
upo\f which preset cha\f\fel 1 is automatically tu\fed i\f\b
TUNE button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
ma\fually, push the
butto\f u\ftil the desired
freque\fcy is achieved\b
The freque\fcy cha\fges i\f steps of 100 kHz o\f the FM
ba\fd, 9 kHz o\f the MW ba\fd, a\fd 3 kHz o\f the LW
ba\fd\b
SEEK button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
automatically, push the
butto\f\b Whe\f the
system detects a broadcasti\fg statio\f, it will stop at
the statio\f\b
Heater and air conditioner, and audio system4-27
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-28Heater and air conditioner, and audio system
*1*2*3*4*5*6Radio memory buttons:
The audio system can store u\f to 18 FM station
\brequencies (six in each o\b FM 1, FM 2 and FM T) , 6
MW and 6 LW station \brequencies.
To store the station \brequency manually:
1. Tune to the desired broadcasting station \bre- quency by using the
orbutton.
2. Push and hold a radio memory button
*1-*6until a bee\f sounds. (The radio mutes when the
memory button is \fushed.)
3. The channel indicator will dis\flay and the radio mute disengages, indicating that the memory is
stored \fro\ferly.
4. Per\borm ste\fs 1 - 3 \bor all other memory buttons.
I\b the battery cable is disconnected, or i\b the audio \buse
blows, the radio memory will be erased. In such a case,
reset the desired stations.
Radio data system (RDS)
Alternative Frequency (AF):
. The AF \bunction o\ferates in the FM (radio) and CD
modes.
. When the AF mode is set to “ON” in the user
setu\f menu mode, the AF indicator illuminates.
For activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
. Automatic switching function
This \bunction com\fares the strengths o\b the
signals o\b all the stations on the AF list and
selects the station with the o\ftimum rece\ftion
conditions.
. Program Information (PI) search
Program In\bormation (PI) search begins automati- cally i\b no suitable station is \bound with the above
automatic switching \bunction. The PI search
\bunction checks each RDS station with the same
PI code. During this time the sound is muted and
“PI SEARCH” is dis\flayed. The PI search o\fera-
tion sto\fs when a suitable station is \bound. I\b no
station is \bound once all the \brequencies have been
searched, the radio returns to the \frevious
\brequency.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
When EON data is being received, this enables
automatic retuning o\b other \freset stations on the
same network. Also, network linked services can
be used. The EON indicator turns on during the
rece\ftion o\b RDS EON stations in the FM mode.
RDS functions:
. Programme Service (PS) function (station
name display function)
When an RDS station is tuned in with seek or
manual tuning, the RDS data is received and the
Program Service (PS) name is dis\flayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
When the radio receives PTY code 31 (an
emergency broadcast code) , the sound is inter-
ru\fted, the emergency broadcast is heard, and
“PTY31 ALARM” is dis\flayed. The volume level at
this time is the same as that \bor tra\b\bic announce-
ments. Once the emergency broadcast is \binished,
the unit immediately returns to the \frevious
source.
. REG (Regional) mode
Some local radio stations are linked together according to their region because they only o\b\ber
limited coverage due to their limited number o\b
transmitters. I\b the signal \brom one station be-
comes weak while you are driving around, RDS
mode will switch to another local station in the
region with a stronger signal.
When the REG mode is activated in the FM band
and the radio receiver is tuned to a local radio
station, it will kee\f receiving this radio station
without switching to another local station. For
activation or deactivation details, see “Audio main
o\feration” (P.4-25) .
Traffic Announcement (TA):
. The TA \bunction o\ferates in the FM and CD
modes.
. The TA mode is turned on or o\b\b when the TA/
NEWS button is \fushed \bor less than 2 seconds.
. The TA mode o\ferates regardless o\b whether the
AF mode is on or o\b\b.
. “TA ON” is dis\flayed when the TA mode is turned
on, and the TA indicator turns on. “TA OFF” is
dis\flayed when the TA mode is turned o\b\b, and the
TA indicator turns o\b\b.
The \bollowing \bunctions o\ferate when the TA mode is
on:
. Traffic announcement interrupt function
When a tra\b\bic announcement is received, the
announcement is tuned in and the volume
increases to the set level.
Once the tra\b\bic announcement is \binished, the unit
returns to the source which was set be\bore the
tra\b\bic announcement started, and the volume
returns to the \frevious level. For EON stations,
the radio is interru\fted by another EON station
with tra\b\bic announcements.
The tra\b\bic announcement interru\ft mode is
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
MUTE button:
Press the
button to pause the track.
CD EJECT button:
To eject a CD\f push the CD EJECT
button.
When the
button \bs pushed tw\bce\f the CD w\bll be
ejected further\f and the CD can be removed w\bth ease.
If a CD \bs ejected by push\bng the
button\f and \bt \bs
not taken out from the load\bng slot\f the CD w\bll
automat\bcally be reloaded to the slot to protect the CD
(12 cm d\bscs only) .
AUX button:
The AUX IN jack \bs located on the aud\bo un\bt. The AUX
IN aud\bo \bnput jack accepts any standard analog aud\bo
\bnput such as from a portable cassette tape\f CD player\f
MP3 player or laptop computers.
Push the AUX button to play a compat\bble dev\bce when
\bt \bs plugged \bnto the AUX IN jack.
RENAULT strongly recommends us\bng a stereo m\bn\b
plug cable when connect\bng your mus\bc dev\bce to the
aud\bo system. Mus\bc may not play properly when a
monaural cable \bs used.
CAUTION:
Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
WARNING:
. Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM rad\bo operat\bon
JVH0012X
The aud\bo system operates when the \bgn\bt\bon sw\btch \bs
\bn the “ACC” or “ON” pos\bt\bon. Frequency range and step change (for Central/
South America):
To change the frequency range and step spec\bf\bcat\bon
of the rad\bo\f perform the follow\bng operat\bons.
1. Turn the aud\bo un\bt off by push\bng the POWER
button.
2. Turn the aud\bo un\bt on by push\bng the POWER button wh\ble push\bng the rad\bo memory buttons
and thebutton.
For Central/South Amer\bca spec\bf\bcat\bon\f the d\bsplay
\bnd\bcates “AM 530 kHz”.
For the other spec\bf\bcat\bon\f the d\bsplay \bnd\bcates “AM
531 kHz”.
If you exper\bence d\bff\bcult\bes \bn chang\bng rad\bo spec\b-
f\bcat\bon\f contact a RENAULT dealer.
button:
When the
button \bs pushed wh\ble the aud\bo
system \bs off\f the aud\bo system w\bll turn on and the
rad\bo w\bll turn on.
When the
button \bs pushed wh\ble another aud\bo
source \bs play\bng\f the another aud\bo source w\bll turn off
and the rad\bo w\bll turn on.
To change the rad\bo bands\f push the
button unt\bl
the des\bred band \bs d\bsplayed.
. AM?FM1 ?FM2
The FM stereo \bnd\bcator\f “ST” w\bll d\bsplay dur\bng FM
stereo recept\bon. When the stereo broadcast s\bgnal \bs
weak\f the rad\bo w\bll automat\bcally change from stereo
to monaural recept\bon.
Heater and air conditioner, and audio system4-33
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-34Heater and air conditioner, and audio system
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station \frequency
manua\b\by, push the
orbutton unti\b the
desired \frequency is achieved.
When adjusting the broadcasting station \frequency
automatica\b\by, push the
orbutton.
When the system detects a broadcasting station, it
wi\b\b stop at the station.
SEEK button:
When adjusting the broadcasting station \frequency
automatica\b\by, push the
button. When the
system detects a broadcasting station, it wi\b\b stop at
the station.
button:
When the
button is pushed, the system wi\b\b seek
and stop at the detected broadcasting station \for 5
seconds, and then it wi\b\b start to seek \for the next
broadcasting station.
Push the
button in this 5-second period to stop
seeking.
Radio memory button:
The audio system can store up to 12 FM station
\frequencies (\for FM1 and FM2) and 6 AM station
\frequencies.
To store the station \frequency:
1. Tune to the desired broadcasting station \fre- quency by using the
orbutton.
2. Push and ho\bd a memory button (1 - 6) unti\b a beep sounds. 3. The switch number and \frequency wi\b\b appear on
the disp\bay when the memory is stored proper\by.
4. Per\form steps 1 - 3 \for a\b\b other memory buttons.
Push a memory button (1 - 6) to se\bect a desired
memory.
I\f the battery cab\be is disconnected, or i\f the audio \fuse
b\bows, the radio memory wi\b\b be erased. In such a case,
reset the desired stations.
(Automatic Preset) button:
The audio system can store up to 6 FM station
\frequencies and 6 AM station \frequencies.
To store the station \frequency automatica\b\by, push and
ho\bd the
button unti\b a beep sounds. The station
wi\b\b be automatica\b\by stored in the “AUTO.P” memory.
The disp\bay indicates “AP-**”.
Push the
button to se\bect a desired memory.
MUTE button:
Press the
button to mute the sound. Press again
to restore the sound.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-38Heater and air conditioner, and audio system
The audio system operates whe\f the ig\fitio\f switch is
i\f the “\bCC” or “ON” positio\f.
FM-AM button:
Whe\f the
/butto\f is pushed while the audio
system is off, the audio system a\fd the radio will tur\f
o\f. Whe\f the
/butto\f is pushed while the CD
player is already operati\fg, it will automatically tur\f off
a\fd the radio will tur\f o\f.
To cha\fge the radio ba\fd, push the
/butto\f
u\ftil the preferred ba\fd appears.
. For FM
FM 1 ?FM 2 ?FM T
. For \bM
MW ?LW ?MW
Duri\fg FM receptio\f, whe\f the
butto\f is pushed
for lo\fger tha\f 1.5 seco\fds, statio\fs are searched for
a\fd the 6 statio\fs of the FM T ba\fd. The sou\fd is
muted u\ftil the auto store operatio\f is completed,
upo\f which preset cha\f\fel 1 is automatically tu\fed i\f.
TUNE button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
ma\fually, push the
orbutto\f u\ftil the
preferred freque\fcy is obtai\fed.
The freque\fcy cha\fges i\f steps of 100 kHz o\f the FM
ba\fd, 9 kHz o\f the MW ba\fd, a\fd 3 kHz o\f the LW
ba\fd.
SEEK button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
automatically, push the
orbutto\f. Whe\f the
system detects a broadcasti\fg statio\f, it will stop at
that statio\f.
*1*2*3*4*5*6Radio memory buttons:
The audio system ca\f store up to 18 FM statio\f
freque\fcies (six i\f each of FM 1, FM 2 a\fd FM T) , 6
MW a\fd 6 LW statio\f freque\fcies.
To store the statio\f freque\fcy ma\fually:
1. Tu\fe to the preferred broadcasti\fg statio\f fre- que\fcy by usi\fg the
orbutto\f.
2. Push a\fd hold a radio memory butto\f
*1-*6u\ftil a beep sou\fds. (The radio mutes whe\f the
memory butto\f is pushed.)
3. The cha\f\fel i\fdicator will be displayed a\fd the radio mute will be ca\fcelled, i\fdicati\fg that the
memory is stored properly.
4. Perform steps 1 - 3 for all other memory butto\fs.
If the battery cable is disco\f\fected, or if the audio fuse
blows, the radio memory will be erased. If this occurs,
reset the desired statio\fs.
Radio data system (RDS)
Alternative Frequency (AF):
. The \bF fu\fctio\f operates i\f the FM (radio) a\fd CD
modes.
. Whe\f the \bF mode is set to “ON” i\f the user
setup me\fu mode, the \bF i\fdicator illumi\fates.
For activatio\f or deactivatio\f, use the MENU butto\f.
(Details are explai\fed later i\f this sectio\f.)
. Automatic switching function
This fu\fctio\f compares the stre\fgths of the
sig\fals of all the statio\fs o\f the \bF list a\fd
selects the statio\f with the optimum receptio\f
co\fditio\fs.
. Program Information (PI) search
Program I\fformatio\f (PI) search begi\fs automati- cally if \fo suitable statio\f is fou\fd with the above
automatic switchi\fg fu\fctio\f. The PI search
fu\fctio\f checks each RDS statio\f with the same
PI code. Duri\fg this time the sou\fd is muted a\fd
“PI SE\bRCH” is displayed. The PI search opera-
tio\f stops whe\f a suitable statio\f is fou\fd. If \fo
statio\f is fou\fd o\fce all the freque\fcies have bee\f
searched, the radio retur\fs to the previous
freque\fcy.
. Enhanced Other Network (EON) data update
(This function also operates when the AF
mode is off.)
Whe\f EON data is bei\fg received, this e\fables
automatic retu\fi\fg of other preset statio\fs o\f the
same \fetwork. \blso, \fetwork li\fked services ca\f
be used. The EON i\fdicator tur\fs o\f duri\fg
receptio\f of RDS EON statio\fs i\f the FM mode.
RDS functions:
. Programme Service (PS) function (station
name display function)
Whe\f a\f RDS statio\f is tu\fed i\f with seek or
ma\fual tu\fi\fg, RDS data is received a\fd the
Program Service (PS) \fame is displayed.
. Emergency broadcast interrupt function
(ALARM INTERRUPTION —EBU SPEC FOR
INFO)
Whe\f the radio receives PTY code 31 (a\f
emerge\fcy broadcast code) , the sou\fd is i\fter-
rupted, the emerge\fcy broadcast is heard, a\fd
“PTY31 \bL\bRM” is displayed. The volume level at
this time is the same as that for traffic a\f\fou\fce-
me\fts. O\fce the emerge\fcy broadcast is fi\fished,
the u\fit immediately retur\fs to the previous
source.
. REG (Regional) mode
Some local radio statio\fs are li\fked together
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
displayed (top left of the display): Signal strength
()\f Battery status* () and BluetoothŠ\bON”
().
*: If the low battery message comes on\f the BluetoothŠ
device must be recharged soon.
The pairing procedure and operation may vary
according to device type and compatibility. See the
owner’s manual of the Bluetooth
Šdevice for further
details.
Select Device:
The paired device list shows which Bluetooth
Šaudio
or cellular phone devices have been paired or
registered with the Bluetooth
Šaudio system. If the list
contains devices\f select the appropriate device to
connect to the Bluetooth
Šaudio system.
The following symbols indicate the capability of the
registered device:
.
: cellular phone integration
.
: Audio streaming (A2DP- Advanced Audio
Distribution Profile)
Delete Device:
A registered device can be removed from the Blue-
tooth
Šaudio system. Select a registered device then
push the TUNE/MENU/ENTER dial to confirm deletion.
Bluetooth:
If Bluetooth
Šhas been switched off\f a notification
message On/Off appears when you select \bBluetooth”
from the setup menu screen\f or push the
button.
To turn the BluetoothŠsignal on\f push the TUNE/
MENU/ENTER dial and a follow up screen will appear.
Select \bOn” and push the TUNE/MENU/ENTER dial to
display the Bluetooth
Šsettings menu screen. Bluetooth
Šaudio streaming main operation:
Place the ignition switch in the \bACC” or \bON”
position. If the audio system is turned off while the
Bluetooth
Šaudio is playing\f pushing thedial will
start BluetoothŠaudio streaming.
AUX button:
To operate BluetoothŠaudio streaming use one of the
following methods:
. Push the
button\f then turn the TUNE/MENU/
ENTER dial to highlight BT Audio\f and push the
TUNE/MENU/ENTER dial.
. Push the
button repeatedly until BT Audio is
highlighted\f then push the TUNE/MENU/ENTER
dial.
The type of display\f
*Aor*B\f shown on the audio
system can vary depending on the BluetoothŠversion
of the device.
Fast Forward/Rewind buttons:
Fast Forward\f Fast Reverse:
When the
/button is pushed continuously\f
the track will be played at high speed. When the button
is released\f the track will be played at normal playing
speed.
Track up/down: By pushing the
/button once\f the track will
be skipped forward to the next track or backward to
the beginning of the current played track. Push the
/button more than once to skip through the
tracks.
DISP button:
If the song contains music information tags (ID3-tags) \f
the title of the played song will be displayed. If tags are
not provided\f the display will not show any messages.
When the
button is pushed repeatedly\f further
information about the song can be displayed along
with the song title.
By pushing and holding the
button the display will
show a detailed overview which after a few seconds
will return to the main display. Push the
button
briefly to return to the main display immediately.
Radio Broadcast data system (RBDS)
The RBDS is a system through which encoded digital
information is transmitted by FM radio stations in
addition to the normal FM radio broadcasting. The
RBDS provides information services such as station
name\f traffic information\f and news.
NOTE:
In some countries or regions, some of these
services may not be available.
Alternative Frequency (AF) mode:
The AF mode operates in the FM (radio) mode.
. The AF mode operates both in the FM (radio) and
CD mode (if FM was previously selected in the
radio mode) .
. The AF function compares signal strengths and
selects the station with the optimum reception
conditions for the currently tuned-in station.
Heater and air conditioner, and audio system4-53
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-56Heater and air conditioner, and audio system
When installing a CB, ham ra\fio or a car phone in \bour
vehicle, be sure to observe the following cautions,
otherwise the new equipment ma\b a\fversel\b affect the
Engine Control S\bstem an\f other electronic parts.
CAUTION:
.Keep the antenna as far away as possible
from the Electronic Control Module.
. Keep the antenna wire at least 20 cm (8 in)
away from the Engine Control harnesses. Do
not route the antenna wire next to any
harnesses.
. Adjust the antenna standing wave ratio as
recommended by the manufacturer.
. Connect the ground wire from the radio
chassis to the body.
. For details, consult a RENAULT dealer.
WARNING:
.Use a phone after stopping your vehicle in a
safe location. If you have to use a phone
while driving, exercise extreme caution at all
times so full attention may be given to
vehicle operation.
. If a conversation in a moving vehicle re-
quires you to take notes, pull off the road to
a safe location and stop your vehicle before
doing so.
CAUTION:
To avoid draining the vehicle battery, use a
phone after starting the engine.
For mo\fel with navigation s\bstem, see the separatel\b
provi\fe\f Navigation Owner’s Manual.
Your vehicle is equippe\f with the Bluetooth
ŠHan\fs-
Free Phone S\bstem. If \bou are an owner of a
Bluetooth
Šenable\f cellular phone, \bou can set up
the wireless connection between \bour cellular phone
an\f the in-vehicle phone mo\fule. With Bluetooth
Š
wireless technolog\b, \bou can make or receive a han\fs-
free telephone call with \bour cellular phone in the
vehicle.
Once \bour cellular phone is paire\f to the in-vehicle
phone mo\fule, no other phone connecting proce\fure
is require\f. Your phone is automaticall\b connecte\f with
the in-vehicle phone mo\fule when the ignition switch
is place\f in the “ON” position with the paire\f cellular
phone turne\f on an\f carrie\f in the vehicle.
You can register up to 5 \fifferent Bluetooth
Šcellular
phones to the in-vehicle phone mo\fule. However, \bou
can talk on onl\b one cellular phone at a time.
Before using the Bluetooth
ŠHan\fs-Free Phone S\bstem, refer to the following notes.
.
Set up the wireless connection between a cellular
phone an\f the in-vehicle phone mo\fule before
using the s\bstem.
. Some Bluetooth
Šenable\f cellular phones ma\b not
be recognize\f b\b the in-vehicle phone mo\fule.
. You will not be able to use a han\fs-free phone
un\fer the following con\fitions.
— Your vehicle is outsi\fe of the telephone service
area.
— Your vehicle is in an area where it is \fifficult to receive ra\fio waves; such as in a tunnel, in an
un\fergroun\f parking garage, near a tall buil\f-
ing or in a mountainous area.
— Your cellular phone is locke\f to prevent it from being \fiale\f.
When the ra\fio wave con\fition is not i\feal or ambient
soun\f is too lou\f, it ma\b be \fifficult for the other part\b
to hear \bour voice \furing a call. Please close the
win\fows if possible.
Do not place the cellular phone in an area surroun\fe\f
b\b metal or far awa\b from the in-vehicle phone mo\fule
to prevent tone qualit\b \fegra\fation an\f wireless
connection \fisruption.
While a cellular phone is connecte\f through the
Bluetooth
Šwireless connection, the batter\b power of
the cellular phone ma\b \fischarge quicker than usual.
The Bluetooth
ŠHan\fs-Free Phone S\bstem cannot
charge cellular phones.
Refer to the cellular phone Owner’s Manual regar\fing
the telephone charges, cellular phone antenna an\f
bo\f\b, etc.
This wireless han\fs-free s\bstem is base\f on Blue-
tooth
Štechnolog\b.
CAR PHONE OR CB RADIO Bluetooth
ŠHANDS-FREE PHONE
SYSTEM (if equipped for model
without navigation system)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
.make a call via voice dialling by pushing thebutton \for more than 2 seconds then say
the voice tag clearly.
\bANDS-FREE TELEP\bONE OPERATION
(Type B)
JV\b0519X
Buttons:
1. Phone button
2. A-Z button
3. TUNE/MENU/ENTER dial
4. SETUP button
Microphone:
The microphone is located near the map light.
WARNING:
While driving, using the cellular phone is ex-
tremely dangerous because it significantly im-
pairs your concentration and diminishes your
reaction capabilities to sudden changes on the
road, and it may lead to a fatal accident. This
applies to all phone call situations such as when
receiving an incoming call, during a phone
conversation, when calling through the phone
book search, etc.
CAUTION:
Certain country or region jurisdictions prohibit
the use of the cellular phone in the car without
hands-free support.
This chapter provides in\formation about the RENAULT
hands-\free phone system using a Bluetooth
Šconnec-
tion.
Bluetooth
Šis a wireless radio communication stan-
dard. This system o\f\fers a hands-\free \feature \for your
cellular phone to enhance driving com\fort.
In order to use your cellular phone with the Bluetooth
Š
o\f the audio system, the cellular phone must \first be set
up. Once it has been set up, the hands-\free mode is
automatically activated on the registered cellular phone
(via Bluetooth
Š) when it comes into range.
A noti\fication message appears on the audio display
when the phone is connected, when an incoming call
is being received, as well as when a call is initiated.
When a call is active, the audio system and
microphone (located near the map light) enable
hands-\free communication.
I\f the audio system is in use at the time, the radio, CD,
or AUX source mode will be muted and will stay muted
until the active call has ended.
The Bluetooth
Šsystem may not be able to connect
with your cellular phone \for the \following reasons:
. The cellular phone is too \far away \from the vehicle.
. The Bluetooth
Šmode on the cellular phone has
not been activated.
. The cellular phone has not been paired with the
Bluetooth
Šsystem o\f the audio unit.
. The cellular phone does not support BluetoothŠ
technology (BT Core v1.2, \bands Free Pro\file v1.0
and Object Push Pro\file v1.0) . NOTE:
For details, see the cellular phone’s owner’s
manual.
\bands-\free phone setup
To set up the BluetoothŠsystem to pair with (connect
or register) a pre\ferred cellular phone, push the
button, select the BluetoothŠkey, and then push the
TUNE/MENU/ENTER dial. It is also possible to display
the set up menu directly by pushing the
button.
. Pair Device
Bluetooth
Šcellular phones can be paired with the
system. A maximum o\f 5 cellular phones can be
registered.
. Select Device
Paired Bluetooth
Šcellular phones are listed on the
display and can be selected \for connection.
. Delete Device
A registered Bluetooth
Šcellular phone can be
deleted.
. Bluetooth
I\f this setting is turned o\f\f, the connection between
the Bluetooth
Šdevices and the in-vehicle Blue-
toothŠmodule will be cancelled.
When success\fully paired, a noti\fication message will
be displayed. During the connection the \following
status icons will be displayed (top le\ft o\f display):
Signal strength (
) , Battery status () and
BluetoothŠ().
*: I\f the low battery message comes on, the BluetoothŠ
device must be recharged soon.
Heater and air conditioner, and audio system4-63
&RQGLWLRQ