2012 RENAULT PULSE warning light


> (GLW    0RGHO .$2(0B5HQDXOW @
.The alarm automatically turns off after approxi-
mately \f0 seconds. \bowever, the alarm reacti-
vates if the vehicle is tampered with again.
The alarm is activated by:
. Operating the door without using the Intelligent
Key system.
. Opening the hood.
How to stop alarm:
. The alarm will stop by unlocking a door with the
door handle request switch or “UNLOCK”
button*2on the Intelligent Key.
. The alarm will stop when the ignition switch is
pushed to the “ACC” or “ON” position.
If the system does not operate as described
above, have it checked by a RENAULT dealer.
ANTI-T\bEFT SYSTEM
The Anti-Theft System will not allow the engine to start
without the use of the registered Anti-Theft System
key.
If the engine does not start using the registered Anti-
Theft System key, it may be due to interference caused
by:
. Another Anti-Theft System key.
. Automated toll road device.
. Automated payment device.
. Other devices that transmit similar signals.
Start the engine using the following procedure:
1. Remove any items that may be causing the interference away from the Anti-Theft System key.
2. Leave the ignition switch in the “ON” position for approximately 5 seconds.
\f. Turn the ignition switch to the “OFF” or “LOCK” position, and wait approximately 10 seconds. 4. Repeat steps 2 and \f again.
5. Start the engine.
6. Repeat the steps above until all possible inter-
ferences are eliminated.
If this procedure allows the engine to start, RENAULT
recommends placing the registered Anti-Theft System
key separate from other devices to avoid interference.
FCC WARNING:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions; (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation of the
device.
Security indicator light
SIC2045
The security indicator light is located on the meter
panel. It indicates the status of Anti-Theft System.
The light operates whenever the ignition switch is in the “LOCK”, “OFF” or “ACC” position. The security
indicator light indicates that the security systems on
the vehicle are operational.
If Anti-Theft System is malfunctioning, this light will
remain on while the ignition switch is in the “ON”
position.
If the light remains on and/or the engine does
not start, contact a RENAULT dealer for Anti-
Theft System service as soon as possible. Be
sure to bring all Anti-Theft System keys that you
have when visiting a RENAULT dealer for service.
For Right-Hand Drive (RHD) model (for Europe):
If Anti-Theft System is malfunctioning, the security
indicator light will illuminate when the ignition switch is
in the “ON” position. \bowever, if the security indicator
light turns off after 15 minutes, you can start the engine
once. See a RENAULT dealer for Anti-Theft System
service as soon as possible.
Pre-driving checks and adjustments\f-17
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
VANITY MIRRORS (if equipped)
S\fA2192
T\b access the vanity mirr\br, pull the sun vis\br d\bwn and
pull up the mirr\br c\bver.
WARNING:
.Never drive the vehicle with the parking
brake applied. The brake will overheat and
fail to operate and will lead to an accident.
. Never release the parking brake from out-
side the vehicle. If the vehicle moves, it will
be impossible to push the foot brake pedal
and will lead to an accident.
. Never use the gearshift in place of the
parking brake. When parking, be sure the
parking brake is fully applied.
. Never leave children or adults who would
normally require the support of others alone
in your vehicle. They could unknowingly
release the parking brake and inadvertently
become involved in a serious accident.
LEVER TY\fE
S\fA2110
T\b apply the parking brake, pull the parking brake lever
up*1.
T\b release the parking brake, firmly depress and h\bld
the f\b\bt brake pedal. \full up the parking brake lever
slightly, push the butt\bn
*2and l\bwer the lever c\bmpletely
*3.
Bef\bre driving, be sure that the brake warning light has
turned \bff.
Pre-driving checks and adjustments3-23
PARKING BRAKE
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3. Push the temperature control “”/“” \fut-
ton to set the desired temperature.
. \bo not set the temperature lower than the outside
air temperature. \boing so may cause the tem-
perature to not \fe controlled properly.
. If the windows fog up, use dehumidified heating
instead of the A/C off heating.
Dehumidified defrosting/defogging:
1. Push the front defogger “
” \futton. (The
“” indicator light will illuminate.)
2. Push the temperature control “
”/“” \fut-
ton to set the desired temperature.
. To remove frost from the outside surface of the
windshield quickly, set the temperature to a high
temperature and the fan speed to the maximum
level.
. After the windshield is cleared, push the front
defogger “
” \futton again. (The indicator light
will turn off.)
. When the front defogger “
” \futton is pushed,
the air conditioner will automatically turn on when
the outside air temperature is a\fove í28C (288F)
to defog the windshield. The air recirculation mode
will automatically turn off. The outside air circula-
tion mode “
” will \fe selected to improve the
defogging performance.
Manual operation
The manual mode can \fe used to control the heater
and air conditioner to your desired settings. (“MAN-
UAL” will appear on the display.)
To turn off the heater and air conditioner, push the
“OFF” \futton. Fan speed control:
Push the fan speed control “
”/“” \futton. Push
the “” \futton to increase the fan speed. Push the
“” \futton to decrease the fan speed.
Push the “AUTO” \futton to change the fan speed to
the automatic mode.
Air flow control:
Push the “MO\bE” \futton to change the air flow mode.
— Air flows from the center and side ventila- tors.
— Air flows from the center and side ventila-tors and foot outlets.
— Air flows mainly from the foot outlets
— Air flows from the defogger outlets and footoutlets.
Temperature control:
Push the temperature control “
”/“” \futton to
set the desired temperature. Push the “” \futton to
increase the temperature. Push the “” \futton to
decrease the temperature.
Outside air circulation:
Push the outside air circulation “
” \futton to draw
the air flow from outside the vehicle. (The “”
indicator light will illuminate.)
Air recirculation:
Push the air recirculation “
” \futton to circulate the
air flow inside the vehicle. (The “” indicator light
will illuminate.) Automatic air intake control:
If the indicator light on either the outside air circulation
“
” \futton or the air recirculation “” \futton is
illuminated, push the \futton with the light illuminated to
turn the light off. The automatic control is set \fetween
the outside air circulation “
” and air recirculation
“” modes.
SERVICING AIR CON\bITIONER
WARNING:
The air conditioner system contains refrigerant
under high pressure. To avoid personal injury,
any air conditioner service should be done only
by an experienced technician with the proper
equipment.
The air conditioner system in your vehicle is charged
with a refrigerant designed with the environment in
mind.
This refrigerant will not harm the earth’s ozone
layer. However, it may contri\fute in a small part to
glo\fal warming.
Special charging equipment and lu\fricant are required
when servicing your vehicle’s air conditioner. Using
improper refrigerants or lu\fricants will cause severe
damage to the air conditioner system. (See “Air
conditioner system refrigerant and lu\fricant” (P.9-4) .)
A RENAULT dealer will \fe a\fle to service your
environmentally friendly air conditioner system.
Heater and air conditioner, and audio system4-7
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-8Heater and air conditioner, and audio system
Air conditioner filter (if equipped)
\fhe air conditioner s\bstem is equipped with an air
conditioner filter which collects pollen. \fo make sure
the air conditioner heats defogs, and ventilates
efficientl\b, replace the filter according the specified
maintenance intervals listed in a separate maintenance
booklet. \fo replace the filter, contact a RENAUL\f
dealer.
\fhe filter should be replaced if the air flow decreases
significantl\b or if windows fog up easil\b when operating
the heater or air conditioner.AUDIO OPERA\fION PRECAU\fIONS
WARNING:
Do not adjust the audio system while driving so
that full attention may be given to vehicle
operation.
\fhe audio s\bstem operates when the ignition switch is
in the “ACC” or “ON” position.
Radio
.Radio reception is affected b\b station signal
strength, distance from radio transmitter, build-
ings, bridges, mountains and other external
influences. Intermittent changes in reception
qualit\b normall\b are caused b\b these external
influences.
. Using a cellular phone in or near the vehicle ma\b
influence radio reception qualit\b.
Compact Disc (CD) pla\ber
.During cold weather or rain\b da\bs, the pla\ber ma\b
malfunction due to the humidit\b. If this occurs,
remove the CD from CD pla\ber and dehumidif\b or
ventilate the pla\ber completel\b.
. \fhe pla\ber ma\b skip while driving on rough roads.
. \fhe CD pla\ber sometimes ma\b not function when
the passenger compartment temperature is ex-
tremel\b high. Lower the temperature before use.
. Do not expose the CD to direct sunlight.
. CDs that are of poor qualit\b, or are dirt\b,
scratched, covered with fingerprints, or that have
pin holes ma\b not work properl\b.
. \fhe following CDs ma\b not work properl\b.
— Cop\b control compact discs (CCCD) — Recordable compact discs (CD-R)
— Rewritable compact discs (CD-RW)
SAA0480
.
Do not use the following CDs as the\b ma\b cause
the CD pla\ber to malfunction.
— 8 cm (3.1 in) discs (except for FM-AM Radio
with Compact Disc Pla\ber (\f\bpe C))
— CDs that are not round
— CDs with a paper label
— CDs that are warped, scratched or have unusual edges.
AUDIO SYSTEM (if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-50Heater and air conditioner, and audio system
2. Push and hold a radio memor\f button*1-*6until a beep sounds. \bThe radio mutes when the
memor\f button is pushed.)
3. The channel indicator will displa\f and the radio mute disengages, indicating that the memor\f is
stored properl\f.
4. Perform steps 1 - 3 for all other memor\f buttons.
If the batter\f cable is disconnected, or if the audio fuse
blows, the radio memor\f will be erased. If this occurs,
reset the desired stations.
USB memor\f device operation
Audio main operation:
The USB connector is located on the instrument panel.
For details, see “USB/AUX connector” \bP.4-55) .
Open the lid and connect a USB memor\f device into
the connector. The s\fstem will switch to the USB
memor\f device mode automaticall\f.
If the s\fstem is turned off while the USB memor\f
device is pla\fing, pushing the
dial will start the
USB memor\f device.
If the USB memor\f device cannot be pla\fed, one of the
following messages will be displa\fed.
. “USB memor\f device not supported”
. “No audio file detected”
WARNING:
Do not connect, disconnect or operate the USB
device while driving. Doing so can be a distrac-
tion. If distracted you could lose control of your
vehicle and cause an accident or serious injury.
CAUTION:
.Do not force the USB device into the USB
port. Inserting the USB device tilted or up-
side-down into the port may damage the
port. Make sure that the USB device is
connected correctly into the USB port.
(Some USB devices come with a
mark as a guide. Make sure that the mark
is facing the correct direction before insert-
ing the device.)
. Do not grab the USB port cover (if equipped)
when pulling the USB device out of the port.
This could damage the port and the cover.
. Do not leave the USB cable in a place where
it can be pulled unintentionally. Pulling the
cable may damage the port.
Refer to \four device manufacturer’s owner information
regarding the proper use and care of the device.
AUX button:
To operate the USB memor\f device use one of the
following methods:
. Push the
button then turn the TUNE/MENU/
ENTER dial to select the USB item. Once high-
lighted, push the TUNE/MENU/ENTER dial.
. Push the
button repeatedl\f until USB is
highlighted, and then push the TUNE/MENU/
ENTER dial.
Operation buttons:
The following operations are identical to the audio main
operation of the Compact Disc \bCD) operation. For
details, see “CD pla\fer operation” \bP.4-48) . .
List view
. Quick search
.
. MIX \bRandom pla\f)
. RPT \bRepeat track)
. Folder browsing
DISP button:
While a track with recorded music information tags
\bID3-tags) is being pla\fed, the title of the pla\fed track
is displa\fed. If the tags are not provided, a notification
message is displa\fed.
When the
button is pushed repeatedl\f, further
information about the track can be displa\fed along
with the track title as follows:
Track time ?Artist ?Album ?Folder name ?Track
time
Track details:
B\f pushing and holding the
button the displa\f will
show a detailed overview and after a few seconds it
will return to the main displa\f. Push the
button
briefl\f to return to the main displa\f immediatel\f.
iPod pla\fer operation
Connecting iPod:
The USB connector is located on the instrument panel.
For details, see “USB/AUX connector” \bP.4-55) . Open
the USB connector lid and connect the iPod cable to
the USB connector. The batter\f of the iPod is charged
while the device is connected to the vehicle.
Depending on the version of the iPod, the displa\f on
the iPod shows a RENAULT or Accessor\f Attached
screen when the connection is completed. When the
iPod is connected to the vehicle, the iPod music librar\f
can onl\f be operated b\f the vehicle audio controls.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
* iPod and iPhone are trademarks of Apple In\f.,
registered in the \b.S. and other \fountries.
WARNING:
Do not connect, disconnect or operate the USB
device while driving. Doing so can be a distrac-
tion. If distracted you could lose control of your
vehicle and cause an accident or serious injury.
CAUTION:
.Do not force the USB device into the USB
port. Inserting the USB device tilted or up-
side-down into the port may damage the
port. Make sure that the USB device is
connected correctly into the USB port.
(Some USB devices come with a
mark as a guide. Make sure that the mark
is facing the correct direction before insert-
ing the device.)
. Do not grab the USB port cover (if equipped)
when pulling the USB device out of the port.
This could damage the port and the cover.
. Do not leave the USB cable in a place where
it can be pulled unintentionally. Pulling the
cable may damage the port.
Refer to your devi\fe manufa\fturer’s owner information
regarding the proper use and \fare of the devi\fe.
Compatibility:
The following models are supported:
. Third generation iPhone (Firmware version
IOS4/4.0)
. Fourth generation iPhone (Firmware version
IOS4/4.0) .
Fifth generation iPod (Firmware version 1.3)
. First generation iPod Classi\f (Firmware version
1.1.1 or 1.1.2PC)
. Se\fond generation iPod Classi\f (Firmware ver-
sion 2.0.1)
. First generation iPod tou\fh (Firmware version
1.1.5 or 2.2.1)
. Se\fond and third generation iPod tou\fh (Firm-
ware version 2.2.1 or IOS4/4.0.0)
. First generation iPod nano (Firmware version
1.3.1)
. Se\fond generation iPod nano (Firmware version
1.1.3)
. Third generation iPod nano (Firmware version
1.1.2PC or 1.1.3PC)
. Fourth generation iPod nano (Firmware version
1.0.2 or 1.0.4)
. Fifth generation iPod nano (Firmware version 1.0.1
or 1.0.2)
The iPod tou\fh may not respond qui\fkly to the system
in some \fases.
Make sure that the iPod firmware is updated.
Operating tips:
. iPod Shuffle and iPod mini are not supported.
. Some iPod operations may not be available with
this system.
AUX button:
To operate the iPod use one of the following methods:
. Push the
button and then turn the T\bNE/
MEN\b/ENTER dial for the \bSB item. On\fe
highlighted, push the T\bNE/MEN\b/ENTER dial. .
Push the
button repeatedly until \bSB is
highlighted and then push the T\bNE/MEN\b/
ENTER dial.
Operation buttons:
Interfa\fe:
The interfa\fe for iPod operation shown on the audio
system display is similar to the iPod interfa\fe. \bse the
T\bNE/MEN\b/ENTER dial to play a tra\fk on the iPod.
The following items \fan be \fhosen from the menu list
s\freen.
. Playlists
. Artists
. Albums
. Tra\fks
. Genres
For further information about ea\fh item, see the iPod
owner’s manual.
The following operations are identi\fal to the audio main
operation of the Compa\ft Dis\f (CD) operation. For
details, see “CD player operation” (P.4-48) .
. List view
. Qui\fk sear\fh
.
. MIX (Random play)
. RPT (Repeat tra\fk)
. Folder browsing
DISP button:
While a tra\fk with re\forded musi\f information tags
(ID3-tags) is being played, the title of the played tra\fk
is displayed. If the tags are not provided then a
notifi\fation message is displayed.
When the
button is pushed repeatedly, further
Heater and air conditioner, and audio system4-51
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
.make a call via voice dialling by pushing thebutton \for more than 2 seconds then say
the voice tag clearly.
\bANDS-FREE TELEP\bONE OPERATION
(Type B)
JV\b0519X
Buttons:
1. Phone button
2. A-Z button
3. TUNE/MENU/ENTER dial
4. SETUP button
Microphone:
The microphone is located near the map light.
WARNING:
While driving, using the cellular phone is ex-
tremely dangerous because it significantly im-
pairs your concentration and diminishes your
reaction capabilities to sudden changes on the
road, and it may lead to a fatal accident. This
applies to all phone call situations such as when
receiving an incoming call, during a phone
conversation, when calling through the phone
book search, etc.
CAUTION:
Certain country or region jurisdictions prohibit
the use of the cellular phone in the car without
hands-free support.
This chapter provides in\formation about the RENAULT
hands-\free phone system using a Bluetooth
Šconnec-
tion.
Bluetooth
Šis a wireless radio communication stan-
dard. This system o\f\fers a hands-\free \feature \for your
cellular phone to enhance driving com\fort.
In order to use your cellular phone with the Bluetooth
Š
o\f the audio system, the cellular phone must \first be set
up. Once it has been set up, the hands-\free mode is
automatically activated on the registered cellular phone
(via Bluetooth
Š) when it comes into range.
A noti\fication message appears on the audio display
when the phone is connected, when an incoming call
is being received, as well as when a call is initiated.
When a call is active, the audio system and
microphone (located near the map light) enable
hands-\free communication.
I\f the audio system is in use at the time, the radio, CD,
or AUX source mode will be muted and will stay muted
until the active call has ended.
The Bluetooth
Šsystem may not be able to connect
with your cellular phone \for the \following reasons:
. The cellular phone is too \far away \from the vehicle.
. The Bluetooth
Šmode on the cellular phone has
not been activated.
. The cellular phone has not been paired with the
Bluetooth
Šsystem o\f the audio unit.
. The cellular phone does not support BluetoothŠ
technology (BT Core v1.2, \bands Free Pro\file v1.0
and Object Push Pro\file v1.0) . NOTE:
For details, see the cellular phone’s owner’s
manual.
\bands-\free phone setup
To set up the BluetoothŠsystem to pair with (connect
or register) a pre\ferred cellular phone, push the
button, select the BluetoothŠkey, and then push the
TUNE/MENU/ENTER dial. It is also possible to display
the set up menu directly by pushing the
button.
. Pair Device
Bluetooth
Šcellular phones can be paired with the
system. A maximum o\f 5 cellular phones can be
registered.
. Select Device
Paired Bluetooth
Šcellular phones are listed on the
display and can be selected \for connection.
. Delete Device
A registered Bluetooth
Šcellular phone can be
deleted.
. Bluetooth
I\f this setting is turned o\f\f, the connection between
the Bluetooth
Šdevices and the in-vehicle Blue-
toothŠmodule will be cancelled.
When success\fully paired, a noti\fication message will
be displayed. During the connection the \following
status icons will be displayed (top le\ft o\f display):
Signal strength (
) , Battery status () and
BluetoothŠ().
*: I\f the low battery message comes on, the BluetoothŠ
device must be recharged soon.
Heater and air conditioner, and audio system4-63
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-64Heater and air conditioner, and audio system
Making a call
The hands-free m\fde can be \fperated \bsing theb\btt\fn \fn the a\bdi\f system.
Initiating a call:
A call can be initiated \bsing \fne \ff the f\fll\fwing
meth\fds:
.Redial
. Ph\fne b\f\fk
. Man\bal dialling
. Missed calls
. Dialled calls
. Received calls
Redial:
T\f redial \fr call the last n\bmber dialled, p\bsh the
b\btt\fn f\fr m\fre than 2 sec\fnds.
Making a call from the phone book:
Once the Bl\bet\f\fthŠc\fnnecti\fn is made between the
registered cell\blar ph\fne and the a\bdi\f system, ph\fne
b\f\fk data will be transferred a\bt\fmatically t\f the a\bdi\f
system. The transfer may take a while bef\fre c\fmple-
ti\fn.
The ph\fne b\f\fk data is available \fnly when the ph\fne
is c\fnnected t\f the system. The system d\fwnl\fads the
latest ph\fne b\f\fk data each time the ph\fne is
c\fnnected. T\f dial a c\fntact fr\fm the ph\fne b\f\fk pr\fceed as
f\fll\fws:
1. P\bsh the
b\btt\fn.
2. T\brn the TUNE/MENU/ENTER dial t\f scr\fll d\fwn t\f Ph\fne B\f\fk and then p\bsh the TUNE/MENU/
ENTER dial.
3. Scr\fll d\fwn thr\f\bgh the list, select the appr\fpriate c\fntact name (highlighted) , and p\bsh the TUNE/
MENU/ENTER dial.
4. A screen will sh\fw the n\bmber t\f be dialled. If c\frrect, p\bsh the TUNE/MENU/ENTER dial again
t\f dial the n\bmber.
If there are n\bmbers assigned f\fr the c\fntact’s
(h\fme) ,(cell\blar ph\fne) \fr(\fffice) , scr\fll
t\f select the appr\fpriate n\bmber t\f dial.
Alternatively, the q\bick search m\fde can be \bsed as
f\fll\fws:
1. P\bsh the
b\btt\fn.
2. T\brn the TUNE/MENU/ENTER dial f\fr the first alphabetic \fr n\bmerical letter \ff the c\fntact name.
Once highlighted, p\bsh the TUNE/MENU/ENTER
dial t\f select the letter.
3. The display will sh\fw the c\frresp\fnding c\fntact name(s) . Where necessary, \bse the TUNE/MENU/
ENTER dial again t\f scr\fll f\brther f\fr the appr\f-
priate c\fntact name t\f call.
4. A screen will sh\fw the n\bmber t\f be dialled. If c\frrect, p\bsh the TUNE/MENU/ENTER dial again
t\f dial the n\bmber.
Manually dialling a phone number:
WARNING:
Park the vehicle in a safe location, and apply the
parking brake before making a call.
T\f dial a ph\fne n\bmber man\bally \bse the a\bdi\f system
display (virt\bal keyb\fard pad) as f\fll\fws:
1. P\bsh the
b\btt\fn, and t\brn the TUNE/MENU/
ENTER dial t\f highlight “Call N\bmber”.
2. P\bsh the TUNE/MENU/ENTER dial t\f select “Call N\bmber”.
3. T\brn the TUNE/MENU/ENTER dial t\f scr\fll al\fng, and select each n\bmber \ff the ph\fne n\bmber.
Once highlighted, p\bsh the TUNE/MENU/ENTER
dial after each n\bmber selecti\fn.
T\f delete the last n\bmber entered scr\fll t\f the “/”
(Backspace) symb\fl, and \fnce highlighted p\bsh
the TUNE/MENU/ENTER dial. The last n\bmber will
be deleted. P\bshing the TUNE/MENU/ENTER dial
repeatedly will delete each s\bbseq\bent n\bmber.
4. After entering the last n\bmber, scr\fll t\f the “
”.
symb\fl, and p\bsh the TUNE/MENU/ENTER dial,
\fr p\bsh the
b\btt\fn t\f dial the n\bmber.
&RQGLWLRQ