2012 RENAULT PULSE power steering


> (GLW    0RGHO .$2(0B5HQDXOW @
2-12Instruments and controls
Anti-lock Braking Syste\f (ABS) warning
lig\bt*Seat belt warning lig\bt*Overdrive off indicator lig\bt*
Brake warning lig\btSupple\fental Restraint Syste\f (SRS) air
bag warning lig\bt*Rear fog lig\bt indicator lig\bt*
C\barge warning lig\btWater-in-fuel-filter warning lig\bt (diesel en-
gine \fodel)Security indicator lig\bt*
Door open warning lig\bt*Cruise control on indicator lig\bt*Slip indicator lig\bt*
Electric power steering warning lig\btCruise control/speed li\fiter set indicator
lig\bt*Speed li\fiter indicator lig\bt*
Engine oil pressure warning lig\btElectronic Stability Progra\f (ESP) off in-
dicator lig\bt*SPORT \fode indicator lig\bt*
Hig\b te\fperature warning lig\bt (red)Front fog lig\bts indicator lig\bt*Stop/Start Syste\f indicator lig\bt (if equipped
for Europe)/Idling Stop Syste\f indicator lig\bt
(if equipped for T\bailand)
Intelligent Key syste\f warning lig\bt*Front passenger air bag status lig\bt*Turn signals/\bazard indicator lig\bts
Low fuel warning lig\bt*Glow plug indicator lig\bt (diesel engine
\fodel)Ve\bicle Dyna\fic Control (VDC) off indicator
lig\bt*
Malfunction warning lig\bt (red) (diesel en-
gine \fodel)Hig\b bea\f indicator lig\bt*: if equipped
Master warning lig\bt*Low te\fperature indicator lig\bt (green)*
P position selecting warning lig\bt*Malfunction Indicator Lig\bt (MIL)
WARNING/INDICATOR LIGHTS AND
AUDIBLE REMINDERS
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-14Instruments and controls
CAUTION:
Do not continue driving if the alternator belt is
loose, broken or missing.
Door open warning light (if e\fuipped)
\bhen the ignition switch is in the “ON” position, the
door open warning light illuminates if any of the doors
are open or not closed securely.
Electric power steering warning light
\bhen the ignition switch is in the “ON” position, the
electric power steering warning light illuminates. After
starting the engine, the electric power steering warning
light turns off. This indicates the electric power
steering system is operational.
If the electric power steering warning light illuminates
while the engine is running, it may indicate the electric
power steering system is not functioning properly and
may need servicing. Have the electric power steering
system checked by a RENAULT dealer.
\bhen the electric power steering warning light
illuminates with the engine running, the power assist
to the steering will cease operation but you will still
have control of the vehicle. At this time, greater
steering efforts are re\fuired to operate the steering
wheel, especially in sharp turns and at low speeds.
(See “Electric power steering system” (P.5-35) .)
Engine oil pressure warning light
\bhen the ignition switch is in the “ON” position, the
engine oil pressure warning light illuminates. After
starting the engine, the engine oil pressure warning
light turns off. This indicates that the oil pressure
sensors in the engine are operational.
If the engine oil pressure warning light illuminates or
blinks while the engine is running, it may indicate that
the engine oil pressure is low.
Stop the vehicle safely as soon as possible. Stop the
engine immediately and call a RENAULT dealer.
CAUTION:
.Running the engine with the engine oil
pressure warning light illuminated could
cause serious damage to the engine.
. The engine oil pressure warning light is not
designed to indicate a low oil level. The oil
level should be checked using the dipstick.
(See “Engine oil” (P.8-10) .)
High temperature warning light (red)
\bhen the ignition switch is in the “ON” position, the
high temperature warning light illuminates and then
turns off. This indicates that the high temperature
sensor in the engine coolant system is operational.
CAUTION:
If the high temperature warning light illuminates
while the engine is running, it may indicate the
engine temperature is extremely high.
Stop the vehicle safely as soon as possible. If the vehicle is overheated, continuing vehicle
operation may seriously damage the engine.
(See “If your vehicle overheats” (P.6-10) for the
immediate action required.)
Intelligent Key system warning light (if
e\fuipped)
After the ignition switch is placed in the “ON” position,
this light comes on for about 2 seconds and then turns
off.
This light illuminates or blinks as follows:
. The light blinks in yellow when the door is closed
with the Intelligent Key left outside the vehicle and
the ignition switch in the “ACC” or “ON” position.
Make sure that the Intelligent Key is inside the
vehicle (for model without vehicle information
display) .
. The light blinks in green when the Intelligent Key
battery is running out of power. Replace the
battery with a new one (for model without vehicle
information display) . See “Battery” (P.8-23) .
. The light illuminates in yellow when it warns of a
malfunction with the electrical steering lock
system or the Intelligent Key system.
If the warning light illuminates in yellow while the
engine is stopped, it may be impossible to free the
steering lock or to start the engine. If the light comes
on while the engine is running, you can drive the
vehicle. However in these cases, contact a RENAULT
dealer for repair as soon as possible.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3 Pre-driving checks and adjustments
Keys ..................\(..................\(..........................\(..................\(..................\(........... 3-2Key ..................\(..................\(.....................\(..................\(..................\(........... 3-2
Anti-Theft System key (if e\fuipped\b ..................\(..................\(........ 3-2
Intelligent Key (if e\fuipped\b ..................\(..................\(....................... 3-3
Door locks ..................\(..................\(...............................\(..................\(............ 3-4 Super lock system (if e\fuipped\b ..................\(..................\(............... 3-4
Locking with key ..................\(..................\(...............................\(............. 3-5
Locking with inside lock knob ..................\(..................\(..................\(. 3-5
Locking with power door lock switch (if e\fuipped\b ................ 3-6
Vehicle speed sensing door lock mechanism (if e\fuipped\b .... 3-6
Auto door lock releasing mechanism (if e\fuipped\b ................. 3-6
Child safety rear door lock ..................\(..................\(..................\(....... 3-7
Remote keyless entry system (if e\fuipped\b ..................\(..................\(. 3-7 Using remote keyless entry system (if e\fuipped\b ..................\(.. 3-7
Intelligent Key system (if e\fuipped\b ..................\(..................\(............... 3-9 Operating range ..................\(..................\(...............................\(.......... 3-10
Using intelligent Key system ..................\(..................\(................... 3-10
Battery saver system ..................\(..................\(..................\(............... 3-12
Warning and audible reminders ..................\(..................\(............. 3-12
Trouble shooting guide ..................\(..................\(..................\(........... 3-13
Using remote keyless entry function ..................\(..................\(..... 3-15 Security system (if e\fuipped\b ..................\(..................\(..................\(.... 3-16
Theft warning system ..................\(..................\(..................\(........... 3-16
Anti-Theft System ..................\(..................\(..........................\(.......... 3-17
Hood ..................\(..................\(..................\(..................\(..................\(............. 3-18 Opening hood ..................\(..................\(..................\(..................\(...... 3-18
Closing hood ..................\(..................\(.....................\(..................\(..... 3-18
Back door ..................\(..................\(...............................\(..................\(......... 3-19 Opening back door ..................\(..................\(..................\(............... 3-19
Fuel filler lid ..................\(..................\(..................\(.......................\(.............. 3-19 Opening fuel filler lid ..................\(..................\(..................\(............ 3-19
Fuel filler cap ..................\(..................\(.....................\(..................\(..... 3-20
Steering wheel ..................\(..................\(..................\(..................\(.............. 3-20
Mirrors ..................\(..................\(.....................\(..................\(..................\(........ 3-20 Inside rearview mirror ..................\(..................\(..................\(........... 3-20
Outside rearview mirrors ..................\(..................\(....................... 3-21
Vanity mirrors (if e\fuipped\b ..................\(..................\(................... 3-23
Parking brake ..................\(..................\(..................\(............................\(...... 3-23 Lever type ..................\(..................\(..................\(..................\(.............. 3-23
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SPA2406Type A (with panic alarm)
SPA2502Type B (without panic alarm)1. Intelligent Key \f2)
2. Mec\banical key \finside t\be Intelligent Key) \f2)
3. Key number plate
WARNING:
.Radio waves could adversely affect electric
medical equipment. Those who use a pace-
maker should contact the electric medical
equipment manufacturer for the possible
influences before use.
. The Intelligent Key transmits radio waves
when the buttons are pushed. The radio waves may affect aircraft navigation and
communication systems. Do not operate the
Intelligent Key while on an airplane. Make
sure the buttons are not operated uninten-
tionally when the unit is stored during a
flight.
T\be Intelligent Key system can operate all t\be door
\fincluding t\be back door) locks using t\be remote
controller function or pus\bing t\be request switc\b on
t\be ve\bicle wit\bout taking t\be key out from a pocket or
purse. T\be operating environment and/or conditions
may affect t\be Intelligent Key system operation.
Be sure to read t\be following before using t\be
Intelligent Key system.
CAUTION:
. Be sure to carry the Intelligent Key with you
when operating the vehicle.
. Never leave the Intelligent Key in the vehicle
when you leave the vehicle.
. When the outside temperature is extremely
low, the Intelligent Key system may not
function properly.
T\be Intelligent Key is always communicating wit\b t\be
ve\bicle as it receives radio waves. T\be Intelligent Key
system transmits weak radio waves. Environmental
conditions may interfere wit\b t\be operation of t\be
Intelligent Key system under t\be following operating
conditions.
. W\ben operating near a location w\bere strong
radio waves are transmitted, suc\b as a TV tower,
power station and broadcasting station.
. W\ben in possession of wireless equipment, suc\b
as a cellular telep\bone, transceiver, and CB radio. .
W\ben t\be Intelligent Key is in contact wit\b or
covered by metallic materials.
. W\ben any type of radio wave remote control is
used nearby.
. W\ben t\be Intelligent Key is placed near an electric
appliance suc\b as a personal computer.
. W\ben t\be ve\bicle is parked near a parking meter.
In suc\b cases, correct t\be operating conditions before
using t\be Intelligent Key function or use t\be mec\banical
key.
Alt\boug\b t\be life of t\be battery varies depending on t\be
operating conditions, t\be battery’s life is approximately
2 years. If t\be battery is disc\barged, replace it wit\b a
new one.
For information regarding replacement of a battery, see
“Intelligent key battery” \fP.8-25) .
Since t\be Intelligent Key is continuously receiving radio
waves, if t\be key is left near equipment w\bic\b transmits
strong radio waves, suc\b as signals from a TV and
personal computer, t\be battery life may become
s\borter.
To start t\be engine w\ben t\be Intelligent Key battery is
disc\barged, see “Pus\b-button ignition switc\b \fmodel
wit\b Intelligent Key system)” \fP.5-6) . Replace t\be
disc\barged battery wit\b a new one as soon as
possible.
Because t\be steering w\beel is locked electrically,
unlocking t\be steering w\beel wit\b t\be ignition switc\b in
t\be “LOCK” position is impossible w\ben t\be ve\bicle
battery is completely disc\barged. In t\bis case, unlock-
ing t\be steering w\beel would be also impossible. Pay
special attention t\bat t\be ve\bicle battery is not
completely disc\barged.
As many as 4 Intelligent Keys can be used wit\b one
ve\bicle. For information about t\be purc\base and use of
additional Intelligent Keys, contact a RENAULT dealer.
Pre-driving checks and adjustments3-9
INTELLIGENT KEY SYSTEM (if
equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
5-8Starting and driving
steering wheel slightly to the right and left.
(See “Vehicle information \fisplay\b (P.2-20) .)
IGNITION SWITCH POSITIONS
SSD0859
When the ignition switch is pushe\f without \fepressing
the brake pe\fal (Automatic Transmission/Continu\tously
Variable Transmission mo\fel) or the clutch pe\fal
(Manual Transmission mo\fel) , the ignition switch
position will change as follows:
. Push once to change to “ACC\b.
. Push two times to change to “ON\b.
. Push three times to change to “OFF\b.
. Push four times to return to “ACC\b.
. Open or close any \foor to return to “LOCK\b when
in the “OFF\b position.
The in\ficator light
*Aon the ignition switch illumi-
nates when the ignition switch is in the “ACC\b or “ON\b
position.
LOCK position
The ignition switch an\f steering lock can only be
locke\f at this position.
The ignition switch will be unlocke\f when it is pushe\f
to the “ACC\b position while carrying the Intelligent Key.
ACC position
The electrical accessory power activates at this
position without the engine turne\f on.
ON position
The ignition system an\f the electrical accessory power
activate at this position without the engine turne\f on.
OFF position
The engine is turne\f off with the steering wheel
unlocke\f.
WARNING:
Never push the ignition switch to the “OFF\b
position while driving. The steering wheel may
lock and cause the driver to lose control of the
vehicle, resulting in serious vehicle damage or
personal injury.
CAUTION:
Do not leave the vehicle for extended periods of
time when the ignition switch is in the “ACC” or
“ON” position and the engine is not running.
This can discharge the battery.
NOTE:
When the ignition switch is pushed while the
Idling Stop System (if equipped) is activated, the
ignition switch will be placed in the "OFF" position.
INTELLIGENT KEY BATTERY DISCHARGE
SSD0860
If the battery of the Intelligent Key is \fischarge\f, or
environmental con\fitions interfere with the Intelligent
Key operation, start the engine accor\fing to the
following proce\fure:
1.
Automatic Transmission (AT)/Continuously
Variable Transmission (CVT) model:
Move the selector lever to the “P\b (Park) or “N\b
(Neutral) position.
Manual Transmission (MT) model:
Move the shift lever to the “N\b (Neutral) position.
2. Firmly \fepress the brake pe\fal (Automatic Trans- mission/Continuousl\ty Variable Transmission mo\f-
el) or the clutch pe\fal (Manual Transmission
mo\fel) .
3. Touch the ignition switch with the Intelligent Key as illustrate\f. (A chime will soun\f.)
4. Push the ignition switch while \fepressing the brake pe\fal within 10 secon\fs after the chime
soun\fs. The engine will start.
After step 3 is performe\f, when the ignition switch is
pushe\f without \fepressing the brake pe\fal, the
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
5-20Starting and driving
.when the selector lever is in the "R" (Reverse\f
position.
. when the rear \befogger is turne\b on.
. when the air con\bitioner is turne\b on.
. when the Electric power steering warning light or
the Anti-lock Braking System (ABS\f warning light
(if equippe\b\f illuminate.
. when the brake pe\bal is not \bepresse\b.
. when stopping the vehicle on sloping roa\bs.
. when the power consumption is large.
NOTE:
It may take some time until Idling Stop System
activates under the following conditions:
. when the battery is \bischarge\b.
. when the outsi\be temperature is low.
. when the battery is replace\b or the battery
terminal is \bisconnecte\b for exten\be\b perio\bs
an\b then reconnecte\b.
NOTE:
The engine will not restart with releasing the
brake pedal while Idling Stop System is acti-
vated under the following condition:
. when the selector lever is in the "P" (Park\f
position.
NOTE:
The engine will restart without releasing the
brake pedal while Idling Stop System is acti-
vated under the following conditions:
. when the rear \befogger is turne\b on.
. when the air con\bitioner is turne\b on.
. when the accelerator pe\bal is \bepresse\b. .
when the steering wheel is operate\b.
. when the battery capacity is low.
. when the power consumption is large.
. when the brake pe\bal is release\b on sloping roa\bs
an\b the vehicle is move\b.
. when the brake pe\bal is release\b with the selector
lever in the "D" (Drive\f or "N" (Neutral\f position.
. when the selector lever is place\b in the "L" (Low\f ,
"D" (Drive\f or "R" (Reverse\f position from the "N"
or "P" position.
. When the negative pressure of the brake system is
not sufficiently applie\b by \bepressing the brake
pe\bal several times.
Use this system while waiting at stoplight, etc. When
the vehicle is stoppe\b for long perio\bs of time, turn off
the engine.
When the engine hoo\b is opene\b with I\bling Stop
System on, the engine will be in the normal stoppe\b
state with the buzzer soun\bing. In this case, restart the
engine with the ignition switch.
When the \briver’s \boor is opene\b with I\bling Stop
System on, I\bling Stop System continues to be
activate\b although the buzzer soun\bs an\b the I\bling
Stop System in\bicator light blinks.
OPERATING IDLING STOP SYSTEM
NOTE:
. The engine stops automatically when the
brake pedal is depressed with the selector
lever in the "D" (Drive) position.
. When the brake pedal is released, the
engine restarts automatically.
. When the Idling Stop System is activated,
the Idling Stop System indicator light illu-
minates in the meter. .
The buzzer sounds and the indicator light
appears in the meter, indicating the condi-
tion of the Idling Stop System. For more
details, see “Stop/Start System indicator
light (if equipped for Europe)/Idling Stop
System indicator light (if equipped for Thai-
land)” (P.2-18) or “Idling Stop System remin-
der buzzer (if equipped for Thailand)” (P.2-
19) .
. The accumulated time of Idling Stop System
and the current saved fuel consumption by
Idling Stop System can be checked using the
drive computer, see “Accumulated time and
current saved fuel consumption (ml (mili-
liter)) by Idling Stop System (if equipped for
Thailand)” (P.2-27) .
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
5-24Starting and driving
WARNING:
.The VDC system is designed to help improve
driving stability but does not prevent acci-
dents due to abrupt steering operation at
high speeds or due to careless or dangerous
driving techniques. Reduce vehicle speed
and be especially careful when driving and
cornering on slippery surfaces and always
drive carefully.
. Do not modify the vehicle’s suspension. If
suspension parts such as shock absorbers,
struts, springs, stabilizer bars, bushings and
wheels are not RENAULT-approved or are
extremely deteriorated, the VDC system may
not operate properly. This could adversely
affect vehicle handling performance, and the
“VDC OFF” indicator or “SLIP”indicator or
both indicator lights may illuminate.
. If brake related parts such as brake pads,
rotors and calipers are not standard equip-
ment or are extremely deteriorated, the
“VDC OFF” indicator or “SLIP”indicator or
both indicator lights may illuminate.
. If engine related parts such as a muffler are
not standard equipment or are extremely
deteriorated, the “VDC OFF” indicator or
“ SLIP ”indicator or both indicator lights
may illuminate.
. When driving on extremely inclined surfaces
such as higher banked corners, the VDC
system may not operate properly and the
“VDC OFF” indicator or “SLIP”indicator or
both indicator lights may illuminate. Do not
drive on these types of roads. .
When driving on unstable surfaces such as a
turntable, ferry, elevator or ramp, the “VDC
OFF” indicator or “SLIP”indicator or both
indicator lights may illuminate. This is not a
malfunction. Restart the engine after driving
onto a stable surface.
. If wheels or tires other than those recom-
mended are used, the VDC system may not
operate properly and “VDC OFF”indicator or
“SLIP” indicator or both indicator lights may
illuminate.
. The VDC system is not a substitute for winter
tires or tire chains on a snowcovered road.
When accelerating or \friving on slipper\b surfaces, the
tires ma\b spin or sli\fe. With the Vehicle D\bnamic
Control (VDC) s\bstem, sensors \fetect these move-
ments an\f control the braking an\f engine output to
help improve vehicle stabilit\b.
. When the VDC s\bstem is operating, the “SLIP”
in\ficator in the instrument panel blinks.
. If the “SLIP” in\ficator blinks, the roa\f con\fitions
are slipper\b. Be sure to a\fjust \bour spee\f an\f
\friving to these con\fitions. Be sure to \frive
carefull\b. (See “Slip in\ficator light” (P.2-17)
an\f“Vehicle D\bnamic Control (VDC) off in\ficator
light” (P.2-18) .)
. In\ficator light
If a malfunction occurs in the s\bstem, the “SLIP”
an\f “VDC OFF” in\ficator lights illuminate in the
instrument panel. As long as these in\ficators are
illuminate\f, the VDC s\bstem function is cancele\f.
The VDC s\bstem uses a Brake Limite\f Slip Differential
(BLSD) function to improve vehicle traction. The BLSD
s\bstem works when one of the \friving wheels is
spinning on a slipper\b surface. The BLSD s\bstem
brakes the spinning wheel, which \fistributes the \friving power to the other \frive wheel. If the vehicle
is operate\f with the VDC OFF switch pushe\f an\f the
VDC s\bstem turne\f off, all VDC s\bstems will be turne\f
off. The BLSD s\bstem will still operate with the VDC
s\bstem off. If the BLSD s\bstem is activate\f, the “SLIP”
in\ficator light will blink an\f \bou ma\b hear a clunk noise
an\f/or feel a pulsation in the foot brake pe\fal. This is
normal an\f is not an in\fication of a malfunction. While
the VDC s\bstem is operating, \bou ma\b feel a pulsation
in the foot brake pe\fal an\f hear a noise or feel a
vibration from un\fer the hoo\f. This is normal an\f
in\ficates that the VDC s\bstem is working properl\b.
The VDC s\bstem computer has a built-in \fiagnostic
feature that tests the s\bstem each time \bou start the
engine an\f move the vehicle at a low spee\f forwar\f or
backwar\f. When the self-test occurs, \bou ma\b hear a
“clunk” noise an\f/or feel a pulsation in the foot brake
pe\fal. This is normal an\f is not an in\fication of a
malfunction.
VEHICLE DYNAMIC CONTROL (VDC) OFF
SWITCH
SIC1881
The vehicle shoul\f be \friven with the Vehicle D\bnamic
Control (VDC) s\bstem ON for most \friving con\fitions.
When the vehicle is stuck in mu\f or snow, the VDC
VEHICLE DYNAMIC CONTROL (VDC)
SYSTEM (if equipped except for
Europe)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
system reduces the engine output to reduce wheel
spin. The engine speed will \fe reduced even if the
accelerator is depressed to the floor. \bf maximum
engine power is needed to free a stuck vehicle, turn
the VDC system off.
To turn off the Vehicle Dynamic Control (VDC) system,
push the VDC OFF switch. The
indicator light will
illuminate on.
Push the VDC OFF switch again or restart the engine
to turn ON the system.
WARNING:
. The Electronic Stability Program (ESP) sys-
tem is designed to help improve driving
stability but does not prevent accidents due
to abrupt steering operation at high speeds
or due to careless or dangerous driving
techniques. Reduce vehicle speed and be
especially careful when driving and corner-
ing on slippery surfaces and always drive
carefully.
. If engine related parts such as a muffler are
not standard equipment or the “ESP OFF”
indicator or “SLIP”indicator or both indica-
tor lights may illuminate.
. Do not modify the vehicle’s suspension. If
suspension parts such as shock absorbers,
struts, springs, stabilizer bars and bushings
are not RENAULT approved or are extremely
deteriorated the ESP system may not oper-
ate properly. This could adversely affect
vehicle handling performance, and the
“ESP OFF” indicator or “SLIP”indicator or
both indicator lights may illuminate.
. If brake related parts such as brake pads,
rotors and calipers are not standard equip-
ment or are extremely deteriorated, the “ESP
OFF” indicator or “SLIP”indicator or both
indicator lights may illuminate.
. When driving on extremely inclined surfaces
such as higher banked corners, the ESP
system may not operate properly and the
“ESP OFF” indicator or “SLIP”indicator or
both indicator lights may illuminate. Do not
drive on these types of roads. .
When driving on unstable surfaces such as a
turntable, ferry, elevator or ramp, the “ESP
OFF” indicator or “SLIP”indicator or both
indicator lights may illuminate. This is not a
malfunction. Restart the engine after driving
onto a stable surface.
. If wheels or tires other than those recom-
mended are used, the ESP system may not
operate properly and “SLIP”indicator light
may illuminate.
. The ESP system is not a substitute for winter
tires or tire chains on a snow-covered road.
. When the ESP system is operating, the “SL\bP”
indicator
in the instrument panel \flinks.
. \bf the “SL\bP” indicator \flinks, the road conditions
are slippery. Be sure to adjust your speed and
driving to these conditions. Be sure to drive
carefully. (See “Slip indicator light” (P.2-17) and
“Electronic Sta\fility Program (ESP) off indicator
light” (P.2-16) .)
. \bndicator light
\bf a malfunction occurs in the system, the “SL\bP”
indicator lights illuminate in the instrument
panel. As long as these indicators are illuminated,
the ESP system function is canceled.
The ESP system uses a Brake Limited Slip Differential
(BLSD) function to improve vehicle traction. The BLSD
system works when one of the driving wheels is
spinning on a slippery surface. The BLSD system
\frakes the spinning wheel, which distri\futes the
driving power to the other drive wheel. \bf the vehicle
is operated with the ESP system turned off, all ESP
system functions will \fe turned off.
The BLSD system and ABS will still operate with the
ESP system off. \bf the BLSD system is activated, the
“SL\bP” indicator light will \flink and you may hear a
Starting and driving5-25
ELECTRONIC STABILITY PROGRAM
(ESP) SYSTEM (if equipped for
Europe)
&RQGLWLRQ