bulbschanging ......................................... (up to the end of the DU)
changing a bulb .................................... (up to the end of the DU)
bulbs changing ......................................... (up to the end of the DU)
lights changing bulbs ................................ (up to the end of the DU)
5.10
ENG_UD23534_3
Projecteurs lampes au xénon : remplacement des lampes (X45 - H45 - Renault)
ENG_NU_977-2_H45_Ph2_Renault_5
cleaning the headlights
As the headlights are made of plastic
glass, use a soft cloth or cotton wool
to clean them. If this does not clean it
properly, moisten the cloth with soapy
water, then wipe clean with a soft damp
cloth or cotton wool.
Finally, carefully dry off with a soft dry
cloth.
c leaning products containing alco -
hol must not be used.
XenOn heaDlIghts: changing bulbs
Because some components (the bat -
tery, its mounting) need to be removed,
you are advised to have your bulbs
replaced by an approved dealer.
Dipped beam headlights A
never remove cover A. fire hazard.
A special mounting is re -
quired to fit this type of
headlight, it is forbidden to
fit a headlight with xenon
bulbs to a vehicle which was not
designed for it.
cornering lights
Remove cover B , pull on the connec -
tor 2. Remove clip 3, pressing down on
it, then remove the bulb holder.
Bulb type: h7.
Front side light
Remove the cover B , then pull bulb
holder 4.
Bulb type: w5w .
Direction indicator lights
Turn the bulb holder 1 to the left.
Bulb type: wy21w .
Due to the danger involved
in handling high-voltage de-
vices, this type of bulb must
be replaced by an approved
dealer.
The engine may be hot
when carrying out opera -
tions in close proximity. In
addition, the engine cooling
fan can come on at any moment.
Risk of injury.
1
a
B
a
2
34
