2012 Peugeot iOn height

.Familiarisation
7
Instruments and controls
Lighting and direction indicator stalk2.Instrument panel. 3.Driver's airbag.
H
orn. 4. USB por t.
5. Opening control for the fast charging flap (vehicle left hand side).
6.Electric window switches and switch for deactivating the the front and rear passenger electric window controls.
7. Fusebox.8.Opening control for the normal charging
flap (vehicle right hand side). 9. Headlamp height adjustment.
ASR/ESP deactivation switch.10.Door mirror controls.11. Cup holder. 12.
Side vents.13.Window demisting vent.

.Familiarisation
9
Sitting comfortably


Front seats
38
1.
Head restraint height adjustment. 2.Backrest angle adjustment.3.Driver's seat cushion height adjustment. 4.
Seat forwards-backwards adjustment.

Comfort
38














Front seats
1.Adjustable head restraint2.Adjustment of the backrest angle
Operate the control lever and adjust theposition of the backrest to the front or to the rear. 3.Adjustment of the driver's seat heightRaise or lower the control lever the number
of times required to obtain the desiredposition.4.Forwards-backwards adjustment of the
seat position Lift the control bar and slide the seatforwards or backwards.

3
Comfort
39






Head restraint height adjustment
)To raise it, pull upwards. )To lower it, push it downwards, pressing
the height adjustment button at the same
time.)To remove it, raise it to the high position,
then remove it pressing the height
adjustment button at the same time.)To refit it, engage the rods of the head restraint in the apertures, pressing the height adjustment button at the same time.
Never drive with the removed headrestraints in the vehicle as they couldbe thrown around the vehicle on sharp braking. They must always be in placeand adjusted correctly.
After installing the head restraint, checkthat the height adjustment button has engaged correctly. The adjustment is correct when the top of the head restraint is aligned with thetop of the head of the seated person.
Press the control switch, located on the
dashboard, to switch on the driver's seat
heatin
g.
The warning lamp in the switch comes on.
The temperature is controlled automatically.
Pressing a second time stops operation.


Heated seat control

5
Visibility
59
Daytime running lamps
Special daytime lighting so that the vehicle can
be seen more easily.
The daytime running lamps come on
automatically when starting the motor, if no
other lighting is on.
They cannot be deactivated.With the main li
ghting control ring in the AUTOposition, the sidelamps and dipped beamheadlamps come on automatically, without anyaction by the driver, when a low level of ambientlight is detected.
When the light returns to a sufficient level or the wipers are switched off, the lighting is switched
off automatically.The sensor is located at the base of the windscreen.
Automatic illumination of headlamps
Automatic lighting off
When the lighting stalk is in the "AUTO"position, if the ignition switch is in the "LOCK"
or "ACC" position or if the key has beenremoved, the lighting switches off automaticallywhen the driver's door is opened.
The initial setting is position "0".









Headlamp
adjustment

To avoid causing a nuisance to other road
users, the height of the halogen headlamps should be adjusted according to the load in the
vehicle.
0. Driver only or driver + 1 front passenger.
1 or 2. 4 people (including the driver).3.
4 people (including the driver) + maximumauthorised load.4.Driver + maximum authorised load.

Although these lamps are located in the same unit as the front foglamp, theyoperate with a specific bulb.
Their use is covered by road vehiclelighting regulations.

In foggy weather or in snow, thesunshine sensor may detect sufficient light. The lighting will not come onautomatically. Do not cover the sunshine sensor, the associated functions will no longer be controlled.

Child safety
68












ISOFIX child seat recommended by PEUGEOT and approved for
your vehicle

RÖMERBabySafePlus ISOFIX
(size category E)

Group 0+: up to 13 kg
It is installed in the rear ward facin
g position using an ISOFIX base which attaches to the rings A .
The stay for the ISOFIX base must be adjusted in height so that it is contactwith the floor of the vehicle.
RÖMER Duo Plus ISOFIX(size class B1 )

Group 1: from 9 to 18 kg
It is installed in the for wards facing position.
It is fitted with an upper strap that is attached to the ISOFIX upper ring, called the TOP TETHER.
Three angles for the shell: sitting, inclined and lying positions.

This child seat can also be used on seats which are not fitted with ISOFIX mountings.
In this case, it must be attached to the vehicle seat using the three point seat belt.Follow the instructions for fitting the child seat given in the seat manufacturer's installation guide.

.
Visual search
153
Exterior
Remote control key 31- 32- opening / closing- central locking- anti-theft protection Starting - Stopping the vehicle 53
Lighting 57-59 Headlamp height adjustment 59 Changing bulbs 99 -104- front lamps- foglamps - daytime running lamps- direction indicator repeaters

Wipers 60Changing a wiper blade 112
Door mirrors 42
Doors 35 - opening / closingElectric windows 34
Charging flaps 37 Charging the main battery 82-87- normal- fast



Accessories 113

ABS, EBFD, EBA, ASR, ESP 72-74 Tyre pressures 125Changing a wheel 96 -98
Boot 36- opening / closing
Changing bulbs 10 4 -10 6- rear lamps- 3rd brake lamp - number plate lamps- foglamp
Recovery 112

Visual search
156
Instruments and controls (continued)
Lighting controls 57-59 Direction indicators 71

Instrument panels 18 Warning lamps 19 -25 Indicators 26-30 - main battery state of charge indicator - energy consumption / generation indicator - speedometer - total distance recorder - trip distance recorder - lighting dimmer - service indicator - range indicator


Horn 71
Hazard warning lamps 71
Wiper controls 60
Ignition switch, starting/stopping the vehicle 53

Door mirrors 42
Emergency or assistancecall 72, 127-128
Headlamp height adjustment 59