Practical information
82
Charging the main battery
)Pull lever 1
, located at the bottom of the
dashboard, driver's side, to open the
access flap for the normal charging socket(right hand side of the vehicle).
Normal charging
Before connecting, check that the electrical installation you want to usemeets standards *
and is compatiblewith the current rating on the chargingcable control unit. In all cases, it is recommended that your installation be checked by a qualified electrician before use andthen on a regular basis.
There are two types of charging you can use:normal or fast.
Normal charging should be used in pre
ference;
it is done from a domestic mains power point.
Fast charging is done at a compatible fastcharging station.
) Apply the parking brake and put the driveselector in position P
. P )
Switch off all electrical consumers and turn
the ignition switch to the "LOCK"
position.
You must always use only a genuine PEUGEOT charging cable.
If the ambient temperature is lower than-25° C, charging may not be possible.
*
For example, in France the standard
is NF C 15-100.
Practical information
86
Check the compatibility of the charging station and its charging cable with your vehicle.
)
Press latch 4to open the socket cover. )
Ensure that there is no foreign body on the
vehicle's charging socket.
Fast charging *
)Apply the parking brake and put the drive
selector in position P.P )Switch off all electrical consumers and turn
the ignition switch to the "LOCK"position. )Pull lever 3 , located alongside the driver's
seat, outer side, to open the access flap for
the fast char
ging socket (left hand side of
the vehicle).
Do not touch the metal end of thenormal charging socket or of thecharging cable. Risk of electrocution and/or faults.
)Connect the charging cable of the charging station to the vehicle following the
instructions on use of the station.
*
Depending on equipment.
