Page 15 of 168
.Familiarisation
13
Passenger safety
1.
Inser t the key. 2.Select position: "ON"(activation), with front passenger or
"for wards facing" child seat, "OFF"
(deactivation), with "rear facing" child seat.
Front passenger's airbag
Two rings A
, located between the seat cushion
and backrest are used to secure an ISOFIXchild seat.
A ring B is used to secure an upper strap called
the TOP TETHER.
ISOFIX mountings
79
Child lock
A.
Child lock on.
B. Child lock off.
7
0
67
Page 43 of 168
3
Comfort
41
Returning the seat backrest to its original position
F Push the seat backrest in position and secure it,F
refit the head restraints or put them back in
place.
1. Place the head restraints in the low position
or remove them if necessary,2.pull the control for wards to release
backrest,
3.fold the backrest forward.
Folding the backrest
When returning the backrest to itsoriginal position, take care not to trapthe seat belts.
Page 47 of 168
3
Comfort
45
12 V accessory
socket
F To connect a 12 V accessory (max power: 120 W), lift the cover andconnect a suitable adaptor.
Mat
To prevent any risk of jamming under the pedals:
- only use mats suited to the fixings already present in the vehicle; it is imperative that these fixings are used.
- never fit one mat on top of another.
When removin
g the mat on the driver's side,
move back the seat as far as possible and
remove the fixin
gs.
When refitting, position the mat correctly on the
pins and clip the fixings. Check that the mat issecured firmly. The sun visors fold for wards, and to the side
when the
y are unhooked.
They are fitted with a cour tesy mirror and a
ticket holder.
Sun visor
Page 67 of 168
6
Child safety
65
Child seats recommended by PEUGEOT
PEUGEOT offers a complete range of recommended child seats which are secured using athree point seat belt:
Group 0+: from bir th to 13 kgGroups 1, 2 and 3: from 9 to 36 kg
L1"RÖMER Baby-Safe Plus"
Installed in the rearwards-facing position.L
2"KIDDY Comfor t Pro"
The impact shield must be
used for carrying youngchildren (from 9 to 18 kg).
Groups 2 and 3: from 15 to 36 kg
L4"KLIPPAN Optima"From the age of 6 years (approximately 22 kg),
the booster is used on its own.
L5
"RÖMER KIDFIX" Can be fitted to the vehicle's ISOFIX mountings.
The child is restrained by the seat belt.
Page 68 of 168

Child safety
66
Installing child seats using the seat belt In accordance with European regulations, this table indicates the options for installing child seats secured using a seat belt and universally approved (a)in accordance with the weight of the child and the seat in the vehicle.
Weight of the child and indicative age
SeatUnder 13 kg(groups 0(
b )and 0+)
Up to approx 1 year
From 9 to 18 kg(group 1)1 to 3 years approx
From 15 to 25 kg(group 2)3 to 6 years approx
From 22 to 36 kg(group 3)
6 to 10 years approx
Front passenger seat ( c )L1ISOFIX ROMER Duo
Plus (secured with
the seat belt)XX
Outer rear seatsUUUU
(a) Universal child seat: child seat that can be installed in all vehicles using a seat belt.(b)
Group 0: from bir th to 10 kg. Shells seats and baby carriers cannot be installed in the front passenger seat.(c)Consult the legislation in force in your country before installing your child on this seat. U
: Seat suitable for the installation of a child seat secured using a seat belt and universally approved, "rear wards-facing" and/or "forwards-facing". X:
Seat not suitable for the installation of a child seat of the indicated weight group.
Page 69 of 168

6
Child safety
67
Your vehicle has been approved in accordance
with the new
ISOFIX regulation .
The seats, represented below, are fitted with
re
gulation ISOFIX mountings:
"ISOFIX" mountings
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats
are fitted with two latches which are secured on the two rings A. Some seats also have an upper strapwhich is secured to the ring B.
To a t t a c h t h i s s t r ap, remove the head restraint from the vehicle's seat. Attach the hook to the
ring B
, then tighten the upper strap.
The incorrect installation of a child seatin a vehicle compromises the child's protection in the event of an accident.
For information re
garding the ISOFIX child seats which can be installed in your vehicle,
refer to the table showing the locations for
installing ISOFIX child seats. - a rin
g B
for securing the upper strap called
the TOP TETHER, located in the boot. There are three rin
gs for each seat:
- two r
ings A
located in the angle between
the vehicle seat's cushion and backrest, indicated by a label.
Page 71 of 168

6
Child safety
69
Installing ISOFIX child seats
In accordance with European regulations, this table indicates the options for the installation of ISOFIX child seats on the vehicle seats fitted with
ISOFIX mountings.
In the case of the universal and semi-universal ISOFIX child seats, the child seat's ISOFIX size category, determined by a letter between A
and G
,
is indicated on the child seat next to the ISOFIX logo.
IUF:seat suitable for the installation of an Isofix U niversal seat, "F
orward facing" and secured using the "Top Tether" upper strap.X:seat which is not suitable for the installation of an ISOFIX seat of the size category indicated.
Weight of the child
/ indicative age
Less than 10 kg(group 0)Up to 6 monthsapprox
Less than 10 kg (group 0)Less than 13 kg (group 0+)
Up to 1 year approx
From 9 to 18 kg (group 1)From 1 to 3 years approx
Type of ISOFIX child seatInfant car seat*"rear facing""rear facing" "for ward facing"
ISOFIX size categoryFGCDECDABB1
Universal and semi-universalISOFIX child seats which can be installed on the outer rear seatsXXXRÖMER
BabySafe Plus
I
SOFIXXXIUF
*
Infant car seats and "car cots" cannot be installed on the front passenger seat.
Page 72 of 168

Child safety
70
The incorrect installation of a child seat in a vehicle compromises the child's protectionin the event of an accident. When installing a child seat using the seat belt, check that the seat belt is tightenedcorrectly on the child seat and that it secures the child seat firmly on the seat of your vehicle.
Remember to fasten the seat belts or the child seat harnesses keeping the slackinrelation to the child's body to a minimum, even for short journeys.
For optimum installation of the "for wards-facing" child seat, ensure that the back of the child seat is in contact with the backof the vehicle's seat and that the head restraint does not cause any discomfort.
If the head restraint has to be removed,ensure that it is stored or attached securelyto prevent it from being thrown around the vehicle in the event of sharp braking.
Children under the age of 10 must not travel in the "forwards-facing" position on the frontpassenger seat, unless the rear seats arealready occupied by other children, cannot be used or are absent.
Deactivate the passenger airbag *
when a"rearwards-facing" child seat is installed onthe front seat. Other wise, the child would risk being seriously injured or killed if the airbag were to inflate.
Advice on child seats
Installing a booster seat
The chest par t of the seat belt must bepositioned on the child's shoulder without
touching the neck.Ensure that the lap part of the seat beltpasses correctly over the child's thighs.PEUGEOT recommends the use of abooster seat which has a back, fitted with aseat belt guide at shoulder level.
As a safety precaution, do not leave: - one or more children alone andunsuper vised in a vehicle, - a child or an animal in a vehicle whichis exposed to the sun, with the windows closed, - the keys within reach of children inside the vehicle. To prevent accidental opening of the doors, use the "Child lock". Take care not to open the rear windows bymore than one third.To protect young children from the rays of the sun, fit side blinds on the rear windows.
Child lock
Mechanical system to prevent opening of the
rear doors using their interior controls.
The control is located on the edge of each rear door.
Child lock on
FLower the control Ato position 1.
Child lock off
FRaise the control Ato position 2.
*
According to country and current locallegislation.