Page 28 of 236
1
INSTRUMENTS and CONTROLS
Warning messages (ignition at "ON")
Message
is on
Cause
Solution - action
Observations
ABS
Fixed Anti-lock braking system
(ABS) fault. Contact a PEUGEOT
dealer or a qualifi ed
workshop.
The vehicle retains
conventional braking
without assistance but
you are advised to stop.
Braking
system
Fixed
Associated warning
lamp.
The level of brake
fl uid in the reservoir
is too low. Stop and top up, otherwise
contact a PEUGEOT
dealer or a qualifi ed
workshop. If the message remains
on after topping up,
contact a PEUGEOT
dealer or a qualifi ed
workshop.
Associated warning
lamp.
Braking system fault. Contact a PEUGEOT
dealer or a qualifi ed
workshop.
You must stop as
soon as it is safe to
do so.
Parking brake
on
Fixed You have moved off with
the parking brake still
applied. Release the parking brake.
Coolant
temperature
Flashing
High engine
temperature. If the message fl ashes
,
wait for the engine to cool
before topping up the level,
if necessary.
You must stop your
vehicle as soon as it
is safe to do so.
Flashing
If the message fl ashes
and the service warning
light comes on
, contact
a PEUGEOT dealer or
a qualifi ed workshop
without delay.
Seat belt
Fixed The driver has not fastened
or has unfastened his seat
belt. Fasten your seat belt. There is an intermittent
audible signal above
5 mph (8 km/h).
Page 129 of 236
8
CHECKS
PETROL ENGINE
1.
Screenwash and headlamp wash
reservoir.
2.
Coolant reservoir.
3.
Power steering fl uid reservoir.
4.
Brake fl uid reservoir.
5.
Fusebox.
6.
Battery.
7.
CVT gearbox dipstick.
8.
Radiator cap.
9.
Engine oil dipstick.
10.
Engine oil fi ller cap.
11 .
Air fi lter. Access for checking the levels of the various fl uids and the replacement of certain components.
Page 130 of 236
8
CHECKS
SEL ENGINEDIESEL EN
Access for checking the levels of the various fl uids and the replacement of certain components.
1.
Coolant reservoir.
2.
Power steering fl uid reservoir.
3.
Screenwash and headlamp wash
reservoir.
4.
Brake fl uid reservoir.
5.
Fusebox.
6.
Battery.
7.
Engine oil dipstick.
8.
Engine oil fi ller cap.
9.
Air fi lter.
Page 140 of 236
9
PRACTICAL INFORMATION
Direction indicators (1)
Coloured bulbs must be re-
placed with bulbs of identical
specifi cation and colour.
)
Turn the bulb holder A
to the left
and remove it.
)
Pull the bulb and change it.
To r efi t, carry out these operations in
reverse order.
Access to the bulbs on the left-hand
side
When you change a bulb on the left-
hand side, remove the relay box fi xing
nut B
and move the relay box towards
the rear.
Access to the bulbs on the right-hand side
When you change a bulb on the right-
hand side:
)
Remove the screenwash reservoir
fi xing C
and move the reservoir to-
wards the rear.
)
Remove the coolant reservoir fi xing nut D
.
)
Remove the clip E
and raise the res-
ervoir moving it towards the front.
Page 229 of 236
VISUAL SEARCH
TECHNICAL DATA - MAINTENANCE
Checking the levels ................. 129-131
- fuel supply,
- dipstick,
- power steering fl uid,
- brake fl uid,
- coolant.
Screen/headlamp wash,
fi lling reservoir ...................... 127-129
Bulbs ....................................... 137-143
Changing bulbs ....................... 137-143
Engine technical data ......................157
Weights, loads .................................158
Dimensions ......................................159
Identifi cation markings .....................160
Opening the bonnet, stay ................126
Underbonnet views .................. 127-128
Air/oil fi lters, checks ................. 129-131
Fuses ....................................... 144-148
Battery ..................................... 149-150
