2012 PEUGEOT 4007 fuel

1
INSTRUMENTS and CONTROLS
The total distance is dis-
played in zone 1
of the
screen and the trip dis-
tance in zone 2
.
DISTANCE RECORDERS (A/B)

System for measuring the total distance
travelled by the vehicle during its ser-
vice life and the distance travelled in
a day or other period until it is reset to
zero by the driver.

Zero reset

With the ignition on, press the INFO
button for more than 2 seconds until
zeros appear.

When the engine is run-
ning, this indicates the tem-
perature of the coolant.
COOLANT TEMPERATURE
If the bar is close to the critical
position
located on the right, the temperature is
too high.
The symbol fl ashes when your engine
is overheating.

You must stop your vehicle as soon
as it is safe to do so.


Wait a few minutes before switching
off the engine.

Wait for the engine to cool be-
fore topping up the level. The
cooling system is pressurised.
When the engine is
running
, this indicates
the distance which can
still be travelled with
the fuel remaining in the
tank based on the aver-
age fuel consumption
over the last few miles/
kilometres travelled.
RANGEGE
When the range is less than 30 miles
(50 km)
, dashes are displayed.
Refuel as soon as possible. The display
of the range is updated.
To avoid any risk of scalding,
unscrew the cap by two turns to
allow the pressure to drop.
When the pressure has dropped, remove the cap and top up the
level, if necessary.
Contact a PEUGEOT dealer or
a qualifi ed workshop. This fi gure may increase fol-
lowing a change in the style of
driving or the relief, resulting in
a reduction in the current fuel
consumption.
If you only add a few litres, the
value displayed will be incorrect.
Therefore, you must fi ll the tank
whenever possible.
When you disconnect the bat-
tery, the previous fuel consump-
tion data is lost and the value
displayed will be different from
that displayed before the battery was disconnected. The distance
displayed must be considered
an approximate indication.

1
INSTRUMENTS and CONTROLS
TRIP COMPUTER
Average fuel
consumption
(l/100 km or km/l or
mpg)
This is the average fuel
consumption since the
last zero reset.
This fi gure may change follow-
ing a change in the style of driv-
ing or the relief resulting in an
increase or decrease in the cur-
rent fuel consumption.


Average speed (km/h
or mph)
This is the average
speed calculated since
the last zero reset.


Resetting the information to zero

When the ignition is switched on, the
zero reset switches automatically from
manual mode to automatic mode.
If dashes "---" are displayed
for long periods in place of the
digits while driving, contact a
PEUGEOT dealer or a qualifi ed
workshop.


Current fuel
consumption
(l/100 km or km/l or
mpg)
This is the average fuel
consumption during the last
few seconds of driving.


Information display

With the ignition on, press the INFO

button on the dashboard, to the left of
the instrument panel, several times in
succession to display the different infor-
mation:


- average fuel consumption,

- average speed,

- current fuel consumption. When the required information is dis-
played, press the INFO
button for more
than two seconds to reset all of the in-
formation to zero.

Automatic
If the ignition key remains in the OFF
position for more than 4 hours, the in-
formation is reset to zero automatically.

1
INSTRUMENTS and CONTROLS

When the vehicle is
stationary
, it allows the
user to change the fol-
lowing settings:


- the choice of the reini-
tialisation of the aver-
age fuel consumption
and average speed,

- the fuel consumption units,

- the temperature display unit,

- the display language,

- activation/deactivation of the INFO
button sound,

- the break (rest) reminder display in-
terval,

- restore the factory settings.

SETTING MENU
SETTING MENU

System which provides access to the
settings for certain functions.
The various menus may change be-
tween the type 1 instrument panel and
the type 2 instrument panel.

With the ignition on
, press the INFO

button on the dashboard, to the left of
the instrument panel, several times in
succession until the "SETTING MENU"
screen is displayed.
To change the settings, you
must stop the vehicle and switch
on the ignition.
Apply the parking brake and
place the gear lever in neutral.
When the vehicle is moving
,
the function settings are not
displayed when you press the
INFO
button.


Operation



)
press and hold the INFO
button for
a few seconds to display the menu
screen.
Press and hold the INFO
button
for a few seconds to return to
the previous screen.
When the menu screen is
displayed, if no operation is
carried out within 15 seconds,
the Setting Menu screen is dis-
played.
)
on the menu screen, press the INFO
button to select a function from the
list:


MENU

2/3:



- a/b
(option of displaying a different
language on the instrument panel
screen and the navigation screen),

- activation/deactivation of the
INFO



button sound
,

- ALERT
(changing of the "BREAK
REMINDER" display interval),

- selection of the sound
of the di-
rection indicators,

- activation/deactivation of the cur-
rent fuel consumption
,

MENU

1/3

:



- 1 - 2
(choice of the type of reinitiali-
sation of average fuel consumption
and average speed),

- UNIT
(choice of the fuel consumption
units),

- choice of the temperature display
unit
,

- LANGUAGE
(option of the display
language),
MENU 3/3:



- REINITIALISE
(restore factory set-
tings).

1
INSTRUMENTS and CONTROLS

Choice of the fuel consumption
units
You can choose between different units
for displaying fuel consumption. On the menus screen:


)
press the INFO
button to select
"UNIT"
.

)
press and hold the INFO
button for
a few seconds to display the "UNIT"

screen.

)
press the INFO
button to scroll the
units (km/L, L/100 km, mpg (US),
mpg (UK) and PREVIOUS) in suc-
cession.

)
press and hold the INFO
button for
a few seconds to confi rm your se-
lection. In this case, the distance, speed and
quantity of fuel units will also be changed
in accordance with your choice of fuel
consumption unit. If the battery is disconnected,
the settings memory is cleared
and the default unit (km/L) is re-
stored automatically.


Choice of the temperature
display unit
You can choose between different units
for displaying the temperature.
On the menu screen:


)
press the INFO
button to se-
lect the temperature unit set-
ting symbol (thermometer).

)
press and hold the INFO
button for
a few seconds to scroll the units
(°C and °F) in succession.
The mode selected is confi rmed.
If the battery is disconnected,
the settings memory is cleared
and the default unit (°C) is re-
stored automatically.


Choice of the reinitialisation of
the average consumption and
average speed
You can choose between two average
fuel consumption and average speed
reinitialisation modes:


- automatic reinitialisation (
choice 1)
,

- manual reinitialisation (choice 2)
.
On the menu screen:


)
press the INFO
button to select:

)
press and hold the INFO
button for
a few seconds to switch in succes-
sion from reinitialisation mode 1



(au-
tomatic)
to reinitialisation mode 2
(manual)
.
The mode selected is confi rmed.

1
INSTRUMENTS and CONTROLS

Selection of the sound of the
direction indicators
You can select the sound of the direction
indicators, with the type 2 instrument
panel only.
On the menu screen:


)
press the INFO
button to select
sound 1 or 2 (located on menu 2/3)
.



Activation/deactivation of the
current fuel consumption
You can activate or deactivate the cur-
rent fuel consumption, with the type 2
instrument panel only.
On the menu screen:


)
press the INFO
button to select the
current fuel consumption activation/
deactivation symbol (located on
menu 2/3)
.


Restoring factory settings
(REINITIALISE)
You can restore all of the factory set-
tings for all functions.

Functions



Factory

setting



Reinitialisation
of average fuel
consumption and
average speed

1
(automatic)

Fuel consumption
units

L/100 km



Temperature
display unit

°C



Display language

ENGLISH



INFO button
sound

ON
(activated)

Display of
the "BREAK
REMINDER"
message



OFF
(deactivated)

On the menu screen:


)
press the INFO
button to select
"REINITIALISE"

(located on
menu 2/2 or 3/3 depending on the
instrument panel)
.

)
press and hold the INFO
button for
at least 5 seconds
.
An audible signal is heard and all of the
factory settings are restored for all func-
tions.

)
press and hold the INFO
button for
a few seconds to scroll through the
choices in succession (ON, OFF).
The factory settings are:

1
INSTRUMENTS and CONTROLS

Setting the time

The digital clock is set automatically
.
This mode enables the system to set
the local time automatically using the
signal from the RDS stations.


)

On the control panel, press button B

(SET) to access the "Settings"
menu.


)
On the touch screen, press button B

to access the "System"
menu.
The system settings screen is dis-
played.
"Info" menu
On the control panel, press button D
(INFO)
to access the "Info"
screen and
consult:


- "Support info"
to display the soft-
ware and data versions,

- "Vehicle position"
to display the
GPS location of the vehicle,

- "Calendar"
to make a note of
events, birthdays, etc.,

- "Journey"
to display the average
speed, fuel consumption, distances
and driving time,

- "Environment"
to display the alti-
tude, the atmospheric pressure, the
exterior temperature (the ice symbol
is displayed if there is a risk of ice),

- "Air conditioning"
to display the
information relating to the air condi-
tioning,

- "Mobile phone"
to enter a number,
delete a character, make or receive
a call.

"Route" menu
On the control panel, press button E
(NAVI)
to access the "Route Menu"

screen and select:


- "Detour"
to make a detour through
a specifi ed region,

- "Itinerary"
to change the route,

- "View route"
to display a route in
different ways,

- "Delete route"
to delete a route,

-
"Nearby POI"
to search for the
POIs in the surrounding area.

2
COMFORT

Windows and windscreen demisting/defrosting

Demisting/defrosting


1.
Press button A
to select "exterior air
intake". The indicator lamp on this
button goes off.

2.
Place the air distribution dial in the
"windscreen, side windows and
footwells" position.

3.
Select the air fl ow required.

4.
Select the temperature required.

5.
Press the "air conditioning on/off"
button B
to activate the air condi-
tioning. The indicator lamp on this
button comes on.

Rapid demisting/defrosting


1.
Place the air distribution dial in the
"windscreen and side windows" po-
sition.

2.
Select the maximum air fl ow.

3.
Select the maximum temperature.


Rear screen demisting/
defrosting (6)
With the engine running, press button 6

to activate the demisting/defrosting of the
rear screen and door mirrors.
The indicator lamp on the button comes
on while the demisting/defrosting is in
operation.
The demisting/defrosting goes off au-
tomatically to prevent excessive con-
sumption of current.
Demisting/defrosting can be stopped
before it is switched off automatically
by pressing the button again.
It is advisable to switch off the
rear screen demisting/defrost-
ing as soon as possible as lower
current consumption reduces
fuel consumption.

3
ACCESS
FUEL TANK Opening the cap may cause an inrush
of air. This vacuum, which is completely
normal, is caused by the sealing of the
fuel system.
To fi ll the tank safely:


)
the engine must be switched off,


)
pull the control A
located at the bot-
tom left of the driver's seat to re-
lease the fuel fi ller fl ap,

)
open the fuel fi ller fl ap B
,

)
turn the fi ller cap C
to the left,
When you have fi lled the tank:


)
refi t the fi ller cap, inserting the upper
part fi rst,

)
screw in the fi ller cap to the right,

)
close the fl ap.
Ensure that the fuel fi ller fl ap is closed
correctly.
)
remove the fi ller cap C
,

)
fi ll the tank, but do not continue
after the 3rd cut-off of the nozzle
;
this could cause malfunctions.


Low fuel level

Filling

A label, affi xed on the inside of the fl ap,
reminds you of the type of fuel to be
used according to your engine.
More than 5 litres of fuel must be added in
order to be registered by the fuel gauge. When the low fuel level is
reached, this indication ap-
pears on the instrument pan-
el screen. When it fi rst comes
on, you have approximately
10 litres of fuel remaining.
The symbol fl ashes slowly
(approxi-
mately once per second).
When the symbol begins to fl ash
rapidly
(approximately twice per
second), there is not much fuel
remaining in your tank (approxi-
mately 5 litres).
You must fi ll the tank to avoid
running out of fuel.
This symbol indicates that the
fuel tank cap is located on the
left-hand side of the vehicle.

Location of the cap



1.
Opening.

2.
Closing.


Capacity of the tank: approximately
60 litres.