2012 Peugeot 301 reset

22
Instruments and controls

















Instrument panel for petrol - Diesel
1.
Rev counter (x 1 000 rpm). 2.
Screen. 3.Speedometer (km/h).
A.Electronic or automatic gearbox
information.B.Time.C.Range (km) or
Tr i p d i s t a n c e r e c o r d e r.
D. Fuel gauge.E.
Ser vice indicator (km) then,

total distance recorder.
These two
functions are displayedsuccessively when switching on the ignitionF.Speed limiter or cruise control settings.
4.Reminder of service information
Reset the selected function to zero (trip
distance recorder or ser vice indicator)
Adjust the time.
Dials

Screen

32
Instruments and controls





Service indicator


More than 1800 miles (3000 km) remain before the next service is due

When the ignition is switched on, no ser vice
information appears in the screen. S
ystem which informs the driver when the next ser vice is due, in accordance with the manufacturer's servicing schedule.The point at which the ser vice is due is calculated from the last indicator zero reset.
It is determined by two parameters:
- the distance travelled,
- the time elapsed since the last ser vice.

Between 600 miles (1 000 km)and 1800 miles (3 000 km) remainbefore the next service is due

For a few seconds after the ignition is switched
on, the spanner symbolising the service
operations comes on. The distance recorder
display line indicates the distance remainingbefore the next service is due.Example: 1 700 miles (2 800 km) remainbefore the next service is due.
For a few seconds after the ignition is switched
on, the screen indicates:
A
few seconds after the ignition is switched on, the spanner goes off; the distance recorder fresumes its normal operation. The screen then
indicates the total and trip distances.


Less than 600 miles (1 000 km)
remain before the next service is due
Example:560 miles (900 km) remain before
the next service is due.
For a few seconds after the i
gnition is switched
on, the display indicates:

A few seconds after the ignition is switched
on, the distance recorder resumes its normaloperation. The spanner remains on
to indicatethat a service must be carried out soon.

1
33
Instruments and controls
For a few seconds after the ignition is switchedon, the spanner flashes
to indicate that the ser vice must be carried out as soon as possible.
Example:the ser vice is overdue by 18 0 miles(300 km).
For a few seconds after the ignition is switched
on, the display indicates:
The distance remaining may be weighted by the time factor, depending on the driver's driving habits.
Therefore, the spanner may also come
on if you have exceeded the two year service interval.

Following this operation, if you wish to disconnect the battery, lock the vehicleand wait at least five minutes for the zero reset to be taken into account.
Service indicator zero reset

After each ser vice, the ser vice indicator mustbe reset to zero.
The procedure for resetting to zero is as
follows:) switch off the ignition, )
press and hold the trip distance recorder zero reset button,
)
switch on the ignition; the distance recorder
display begins a countdown,
) when the display indicates "=0"
, release
the button; the spanner disappears.

Retrieving the serviceinformation

You can access the ser vice information at any
time.
) Press the trip distance recorder zero reset button.
The ser vice information is displayed for a
few seconds, then disappears.

A few seconds after the ignition is switched
on, the distance recorder resumes its normal
operation. The spanner remains on.

34
Instruments and controls
travelled by the vehicle during its life.
The total and trip distances are displayed for
thir ty seconds when the ignition is switched off,
when the driver's door is opened and when the
v
ehicle is locked or unlocked.
Total distance recorder
System which measures a distance travelledduring a day or other period since it was reset
to zero by the driver. ) With the ignition on, press the button until
zeros appear.



Tr ip distance recorder












Distance recorders

36
Instruments and controls
Zero reset
)Press the control for more than
two seconds to reset to zero the distance
travelled, the average fuel consumption and the average speed.


System that gives you information on the journey in progress (range, fuel consumption…).

Tr i p c o m p u t e r
Screen in instrument panel
Monochrome screen C

Information displays
)
Press the button, located at the end of the wiper stalk
, to display the various items of
trip computer information in succession.
The trip computer provides the following
information:


-
range,

- current fuel consumption,

- distance travelled,

- avera
ge fuel consumption,

- average speed.
)
The next press then returns you to the
normal display.

1
37
Instruments and controls

If dashes are displayed continuouslywhile driving in place of the digits, contact a PEUGEOT dealer or a qualified workshop.
This function is only displayed from 30 km/h.


This value may vary following a changein the style of driving or the relief,resulting in a significant change in thecurrent fuel consumption.






Tr ip computer, a few definitions
Range
(km)
The number of kilometres which can be covered with the fuel remaining in the tank. Related
to the average fuel consumption over the last few kilometres
travelled.

When the ran
ge falls below 30 km, dashes are
displayed. After filling with at least 5 litres of fuel, the range is recalculated and is displayed
when it exceeds 100 km.

Current fuel consumption
(l/100 km or km/l)
Calculated during the last few seconds.


Average fuel consumption
(l/100 km or km/l)
Calculated since the last trip reset.


Average speed
(km/h)
Calculated since the last trip reset.


Distance travelled
(km)
Calculated since the last tripreset.

176
01

On / Off.
FIRST STEPS


Volume adjustment.

Select screen displaybetween modes:
Full screen: Audio
(or
telephone if call in progress) /
In a window: Audio(or telephone if call inprogress) - Time or Trip computer.
Lon
g press: black screen(DARK).

Selection of AM / FM
wavebands.
Select preset radio station. Long press: store a station.

Displa
y the list of stations received, CD/MP3 tracks or folders.
Lon
g press: managing the classifi cation of MP3/WMA fi les / update the list of stations received.
TA
(Traffi c Announcement)
function On / Off.
Lon
g press: access to type of
information.
Confi rmation
or display of contextual menu.
Automatic search up
/ downfor radio frequencies.
Select previous / next CD, USB, streaming track.
Navi
gation in a list.

Abandon the current operation.
Up one level (menu or folder). Manual step b
y step search up / down for radio frequencies.
Select previous / next MP3 folder.
Select previous / next folder / genre / artist /
playlist in the USB device.
Navi
gation in a list.
Select source:
Radio, CD, AUX, USB,Streaming.
Accept an incomin
g call.

A
ccess to main menu.

Audio settings:
audio ambiences, treble, bass,
loudness, distribution, left/ri
ght
balance, front/rear fader,
automatic volume.

201
FREQUENTLY ASKED QUESTIONS
The following tables contain answers to the most frequently asked questions.
QUESTIONANSWER SOLUTION

There is a difference in sound quality between
the different audiosources (radio, CD...).
For optimum sound qualit
y, the audio settings (Volume, Bass, Treble,
Ambience, Loudness) can be adapted to the different sound sources,
which may result in audible differences when changing source(radio, CD...).
Check that the audio settings (Volume, Bass,
Treble, Ambience, Loudness) are adapted to
the sources listened to. It is advisable to set
the AUDIO functions (Bass, Treble, Front-Rear Fader, Left-Right Balance) to the middle position, select the musical ambience "None" and set theloudness correction to the "Active" position in CD mode or to the "Inactive" position in radio mode.

When changing the settings for treble andbass, the ambience setting is deselected.
When chan
ging the
ambience setting, treble and bass are reset to zero.
Choosing an ambience imposes settings for treble and bass. Modifyingone without the other is not possible. Modify the treble and bass settings or the
ambience setting to obtain the desired sound quality.
When chan
ging the balance setting, distribution is deselected.Choosin
g a distribution setting imposes a balance setting. Modifying one
without the other is not possible. Modify the balance setting or the distribution setting to obtain the desired sound quality.