2012 Peugeot 301 display

34
Instruments and controls
travelled by the vehicle during its life.
The total and trip distances are displayed for
thir ty seconds when the ignition is switched off,
when the driver's door is opened and when the
v
ehicle is locked or unlocked.
Total distance recorder
System which measures a distance travelledduring a day or other period since it was reset
to zero by the driver. ) With the ignition on, press the button until
zeros appear.



Tr ip distance recorder












Distance recorders

1
35
Instruments and controls

















Setting the date and time

Instrument panel

Use the left-hand button on the instrument panel to carry out the operations in the
following order:)press the button for more than two seconds: the minutes flash,)press the button to increase the minutes, )press the button for more than two seconds: the hours flash, )press the button to increase the hours,)press the button for more than two seconds: 24H or 12H is displayed,)press the button to select 24H or 12H, )press the button for more than two seconds
to complete the adjustments.
After approximately 30 seconds without anyaction, the screen returns to the normal display.
Audio system / Bluetooth
Use the audio system buttons to carry out the
operations in the following order:
) press the "MENU"
button,
)
using the arrows, select the "Personalisation - Configuration"menu
then confirm by pressing the control knob,
) using the arrows, select the "Screenconfiguration"menu then confirm,
)
using the arrows, select the "Set date and
time" menu then confirm,
)
select the setting then confirm,)
modify the setting then confirm again to
register the modification,
) adjust the settings one by one, confirmingeach time, )
select the "OK"
tab in the screen thenconfirm to exit the "Set date and time"menu.

36
Instruments and controls
Zero reset
)Press the control for more than
two seconds to reset to zero the distance
travelled, the average fuel consumption and the average speed.


System that gives you information on the journey in progress (range, fuel consumption…).

Tr i p c o m p u t e r
Screen in instrument panel
Monochrome screen C

Information displays
)
Press the button, located at the end of the wiper stalk
, to display the various items of
trip computer information in succession.
The trip computer provides the following
information:


-
range,

- current fuel consumption,

- distance travelled,

- avera
ge fuel consumption,

- average speed.
)
The next press then returns you to the
normal display.

1
37
Instruments and controls

If dashes are displayed continuouslywhile driving in place of the digits, contact a PEUGEOT dealer or a qualified workshop.
This function is only displayed from 30 km/h.


This value may vary following a changein the style of driving or the relief,resulting in a significant change in thecurrent fuel consumption.






Tr ip computer, a few definitions
Range
(km)
The number of kilometres which can be covered with the fuel remaining in the tank. Related
to the average fuel consumption over the last few kilometres
travelled.

When the ran
ge falls below 30 km, dashes are
displayed. After filling with at least 5 litres of fuel, the range is recalculated and is displayed
when it exceeds 100 km.

Current fuel consumption
(l/100 km or km/l)
Calculated during the last few seconds.


Average fuel consumption
(l/100 km or km/l)
Calculated since the last trip reset.


Average speed
(km/h)
Calculated since the last trip reset.


Distance travelled
(km)
Calculated since the last tripreset.

38
Instruments and controls












Monochrome screen C (Audio system / Bluetooth)
This displays the following information:
- time,- date,
- ambient temperature (this flashes if there isa risk of ice),
- status of doors and boot,
- parking sensors,
- audio sources
(radio, CD, USB por t, jack
socket...),
- trip computer (refer to the "Instruments andcontrols" section).
Warning or information messages may appear
temporarily. These can be cleared by pressingthe return button. From
your Audio system / Bluetooth control
panel, you can press: ) the "MENU"
button to gain access to the main menu , )
the "MODE"
button to select the displayof information in "Full screen" or "New
window" mode,
) the " 
" or "
" buttons to navigate in a list,)
press the central button to confirm,
or ) the back button to abandon the operationin progress or go back up one level in themenu.
Displays on the screen
Controls
)Press the "MENU"
button to gain access to
the main menu:
- "Multimedia",
- "Telephone",
- "Trip computer",
-
"Bluetooth connection",
- "Personalisation-configuration",)Press the "  " or " " buttons to select the menu required, then confirm by pressing
the centre button.



Main menu

1
39
Instruments and controls
on, once this menu has been selected you can
make a call and refer to the different telephone
contacts lists.
For more information on the "Telephone"
application, refer to the Audio system /
Bluetooth part of the "Audio and Telematics"section.


"Telephone" menu
Once this menu has been selected, you can consult information concerning the status of the
vehicle.

Alert log

This summarises the status and alert
messages of the functions, displaying them in succession in the multifunction screen.
) Press the "MENU"
button to gain access to
the general menu.) Press the double arrows, then the centrebutton to select the "Trip computer"menu. )
In the "Trip computer"
menu, select the
"A ler t log" line and confirm.

With the Audio s
ystem / Bluetooth switched
on, once this menu has been selected you can activate or deactivate the functions linked with
use of the radio, CD or the MP3 player (USB por t / jack socket).
For more information on the "Multimedia"
application, refer to the Audio system /
Bluetooth par t of the "Audio and Telematics" section.
"Multimedia" menu"Tri
p computer" menu

40
Instruments and controls

"Bluetooth
connection" menu
With the Audio system / Bluetooth switched
on, once this menu has been selected youcan connect or disconnect a Bluetooth device (telephone, media player) and define the
connection mode (hands-free kit, playing audio
files).
For more information on the "Bluetooth connection" application, refer to the Audiosystem / Bluetooth par t of the "Audio and
Telematics" section.
Once this menu has been selected, you cangain access to the following functions:


- "Define the vehicle parameters",

- "Choice of lan
guage",

- "Display configuration".
"Personalisation-
Confi
guration" menu

Defi ne the vehicle parameters
Once this menu has been selected, you can
activate or deactivate the following equipment, classified by category:


- "Driving assistance",

- "Driving lighting",

- "Comfort lighting".

1
41
Instruments and controls

For safety reasons, configuration by the driver of the multifunction screen mustonly be done when stationary.


Choice of language
Once this menu has been selected, you can change the language used by the display from a defined list.


Display confi guration
Once this menu has been selected, you can gain access to the following settings:


- "Choice of units",

- "Set date and time",

- "Display settings",

- "Brightness".