
225
05
TRAFFIC
1
3
4
5
2
2ABC3DEF5JKL4GHI6MNO8TUV7PQRS9WXYZ0*#
1RADIO MEDIANAV ESC TRAFFIC
SETUPADDR
BOOK
2ABC3DEF5JKL4GHI6MNO8TUV7PQRS9WXYZ0*#
1RADIO MEDIANAV ESC TRAFFIC
SETUPADDR
BOOK
2ABC3DEF5JKL4GHI6MNO8TUV7PQRS9WXYZ0*#
1RADIO MEDIANAV ESC TRAFFIC
SETUPADDR
BOOK
2ABC3DEF5JKL4GHI6MNO8TUV7PQRS9WXYZ0*#
1RADIO MEDIANAV ESC TRAFFIC
SETUPADDR
BOOK
2ABC3DEF5JKL4GHI6MNO8TUV7PQRS9WXYZ0*#
1RADIO MEDIANAV ESC TRAFFIC
SETUPADDR
BOOK
  TRAFFIC INFORMATION 
 
 
 
 
 
 
 
 
 
 
CONFIGURE THE FILTERING AND 
DISPLAYING OF THE TMC MESSAGES 
   
When all of the messages on the route are selected, the addition 
of a geographic fi lter is recommended (within a radius of 3 miles 
(5 km) for example) to reduce the number of messages displayed 
on the map. The geographic fi lter follows the movement of the 
vehicle.  
   
The fi lters are independent and their results are concealed. 
  We recommend: 
   
 
-  a fi lter over 6 miles (10 km) around the vehicle in heavy traffi c, 
   
-  a fi lter over 30 miles (50 km) around the vehicle or a fi lter on 
the route on motorway journeys.  
 
     
Press the TRAFFIC button again or 
select the Traffi c Menu function and 
press OK to confi rm.    
Select "Geo. Filter".     
The list of TMC messages appears under the Traffi c Menu sorted 
in order of proximity.  
 
 
Select the fi lter of your choice: 
 
 
Messages on route 
 
 
 
All warning messages 
 
 
 
Only warnings on route 
 
 
 
All messages 
 
 
   
Traffi c Menu 
 
 
 
 
   
Select "Select preferred list" and 
press OK to confi rm.     
The TMC (Traffi c Message Channel) messages provide information 
relating to traffi c and weather conditions, received in real time and 
transmitted to the driver audibly and visually on the navigation map. 
  The guidance system can then suggest an alternative route.  
 
 
Press the TRAFFIC button.  
   
Geo. Filter 
 
  

240
NAV
RADIO
   
AUX standard 
 3
 
 
Reset video settings 
 
 3
 
 
Off/Audio/Audio and Video (AV) 
 
 
     
Ext. Device (Aux) management 
2
3
 
 
"Radio" Menu 
 
 
FM  
1
2
 
 
Manual tune  2
 
 
Refer to the " 
 
Sound settings 
 
" menu 
below. 
 
 
     
Sound settings 
2
3
 
 
"Sound settings" Menu 
 
 
Balance/Fader  
1
2
 
 
Bass/Treble  2
 
 
Equalizer 2
 
 
Linear 
 3
 
 
Classic 
 3
 
 
Jazz 
 3
 
 
Rock/Pop 
 3
 
 
Techno 
 3
 
 
Vocal 
 
 3
 
 
Mute rear speakers  2
 
 
Loudness  2
 
 
Speed dependent volume  2
 
 
Reset sound settings  
 2
 
 
"Navigation" Menu 
 
 
Abort guidance/Resume guidance  
1
2
 
 
Destination input 2
 
 
Address input 
 3
 
Country 4
 
City 4
 
Street 4
 
House number 4
 
Start route guidance 4
 
Postal code 4
 
Save to address book 4
 
Intersection 4
 
City district 4
 
Geo position 4
 
Map 4
 
 
Navigate HOME 
 3
 
 
Choose from last destinations 
 3
 
 
Choose from address book 
 
 3
 
 
Stopovers 2
 
 
Add stopover 
 3
 
Address input 4
 
Navigate HOME 4
 
Choose from address book 4
 
Choose from last destinations 4
 
 
Rearrange route 
 3
 
 
Replace stopover 
 3
 
 
Delete stopover 
 3 

244
   
The table below groups together the answers to the most frequently asked questions concerning the Peugeot Connect Media Navigation (NG4 3D). 
 
FREQUENTLY ASKED QUESTIONS 
 
 
 
QUESTION 
 
   
 
ANSWER 
 
   
 
SOLUTION 
 
 
 
  
There is a difference in 
sound quality between 
the different audio 
sources (radio, CD...).     
For optimum sound quality, the audio settings (Volume, Bass, Treble, 
Ambience, Loudness) can be adapted to the different sound sources, 
which may result in audible differences when changing source (radio, 
CD...).     
Check that the audio settings (Volume, Bass, 
Treble, Ambience, Loudness) are adapted to 
the sources listened to. It is advisable to set 
the AUDIO functions (Bass, Treble, Front-Rear 
Balance, Left-Right Balance) to the middle 
position, select the musical ambience "Linear" and 
set the loudness correction to the "Active" position 
in CD mode or to the "Inactive" position in radio 
mode. 
  The CD is ejected 
automatically or is not 
played by the player.   The CD is inserted upside down, is unplayable, does not contain any 
audio data or contains an audio format which the player cannot play. 
  The CD is protected by an anti-pirating protection system which is not 
recognised by the audio equipment.    
 
-   Check that the CD is inserted in the player the 
right way up. 
   
-   Check the condition of the CD: the CD cannot 
be played if it is too damaged. 
   
-   Check the content in the case of a recorded 
CD: consult the advice in the "Audio" section. 
   
-   The audio equipment's CD player does not 
play DVDs. 
   
-   Due to inadequate quality, certain recorded 
CDs will not be played by the audio system.  
  The CD player sound is 
poor.   The CD used is scratched or of poor quality.   Insert good quality CDs and store them in suitable 
conditions. 
  The audio equipment settings (bass, treble, ambiences) are unsuitable.   Set the treble or bass level to 0, without selecting 
an ambience.  

246
   
 
QUESTION 
 
   
 
ANSWER 
 
   
 
SOLUTION 
 
 
  "TA" is selected. 
However, certain traffi c 
jams along the route are 
not indicated in real time.   On starting, it is several minutes before the system begins to receive the 
traffi c information.   Wait until the traffi c information is being received 
correctly (displaying of the traffi c information 
symbols on the map). 
  In certain countries, only major routes (motorways...) are listed for the 
traffi c information.   This phenomenon is normal. The system is 
dependent on the traffi c information available. 
  The time taken to calculate 
a route sometimes seems 
longer than usual.   The performance of the system may slow down temporarily if a CD/DVD 
is being copied onto the Jukebox at the same time as a route is being 
calculated.   Wait until the CD/DVD has been copied or stop 
the copying before starting the guidance function. 
  I receive a speed camera 
alert for a speed camera 
which is not on my route.   The system announces all speed cameras positioned in a cone located 
in front of the vehicle. It may detect speed cameras located on nearby or 
parallel roads.   Zoom in on the map to view the exact position of 
the speed camera. 
  The speed camera 
audible warning does not 
work.   The audible warning is not active.   Activate the audible warning on Navigation Menu, 
Settings, Set parameters for risk areas. 
  The alert volume is set to minimum.   Increase the volume of the alert when passing a 
speed camera. 
  Does the emergency call 
function work without a 
SIM card?   No, as certain national regulations impose the presence of a SIM card in 
order to make an emergency call.   Insert a valid SIM card in the slot. 
  The altitude is not 
displayed.   On starting, the initialisation of the GPS may take up to 3 minutes to 
receive more than 4 satellites correctly.   Wait until the system has started up completely. 
Check that there is a GPS coverage of at least 
4 satellites (long press on the SETUP button, then 
select "GPS coverage"). 
  Depending on the geographical environment (tunnel...) or the weather, 
the conditions of reception of the GPS signal may vary.   This phenomenon is normal. The system is 
dependent on the conditions of reception of the 
GPS signal.  

247
   
 
QUESTION 
 
   
 
ANSWER 
 
   
 
SOLUTION 
 
 
  The route calculation is 
not successful.   The exclusion criteria may confl ict with the current location (exclusion of 
toll roads on a toll motorway).   Check the exclusion criteria on the Navigation 
Menu ("Route options" - "Avoidance criteria"). 
  There is a long waiting 
period following the 
insertion of a CD.   When a new medium is inserted, the system reads a certain amount of 
data (directory, title, artist, etc.). This may take a few seconds.   This phenomenon is normal. 
  I cannot connect my 
Bluetooth telephone.   The telephone's Bluetooth function may be switched off or the equipment 
may not be visible.    
 
-   Check that your telephone's Bluetooth 
function is switched on. 
   
-   Check that your telephone is visible.  
  The Bluetooth telephone is not compatible with the system.   A list of compatible Bluetooth mobile telephones is 
available from the dealer network. 
  The volume of the 
telephone connected 
in Bluetooth mode is 
inaudible.   The volume depends both on the system and on the telephone.   Peugeot Connect Media Navigation (NG4 
3D) Increase the volume of the , to maximum 
if required, and increase the volume of the 
telephone if necessary. 
  The system does not play 
the DVD.   The region protection may not be compatible.   Insert DVDs which have compatible region 
protection. 
  I cannot copy the CD to 
the Jukebox.   The wrong source is selected.   Change the active source to CD. 
  The CD is copy-protected.   It is normal that a protected CD cannot be copied.  

248
   
 
QUESTION 
 
   
 
ANSWER 
 
   
 
SOLUTION 
 
 
  The system does not 
receive SMS.   The Bluetooth mode does not permit sending of the SMS to the system.   Use your SIM card and the internal telephone. 
  The SIM card used is a twin card.   Use the original SIM card to receive the SMS. 
  I cannot update the risk 
area POIs.   The Navigation Menu - "Update personal POI" is not displayed.   Check that the medium used for the update (SD 
card or USB memory stick) is inserted correctly. 
  An error message is displayed at the end of the procedure.    
 
-   Start the procedure again in full. 
   
-   Consult a PEUGEOT dealer if the problem 
persists. 
   
-   Check that the data on the MEDIUM is 
supplied by an offi cial partner of PEUGEOT.  
  The voice frequencies 
(DTMF) are not 
active when I am 
communicating and I 
press numbers on the 
keypad.   The numeric buttons on the keypad are only active for calls if the display 
is in telephone mode.   To activate them, press the MODE button until the 
telephone is displayed on the screen. 
  An accident area which 
does not concern me is 
displayed on the screen.   The accident areas are displayed near a point defi ned on the map and in 
relation to a direction of travel.   The alert may be triggered when travelling under a 
road or near a road which has a speed camera.  

256
05
1
1
2
3
  PEUGEOT CONNECT USB 
 
 
The system puts together playlists (temporary memory) created 
over a period which depends on the capacity of the USB device. 
  The other sources are available during this time. 
  The playlists are updated each time the ignition is switched off or 
each time a USB memory stick is connected. 
  When connecting for the fi rst time, the classifi cation suggested 
is by folder. When you reconnect, the classifi cation selected 
previously is retained.  
    Connect the memory stick to the port, directly or 
using a lead. If the audio equipment is switched 
on, the USB source is detected as soon as it 
is connected. Play begins automatically after a 
delay which depends on the capacity of the USB 
memory stick. 
  The fi le formats supported are .mp3 (mpeg1 
layer 3 only), .wma (standard 9 only, 
128 kbits/sec compression), .wav and .ogg. 
  Certain playlist formats are supported (m3u, ...) 
  On reconnection of the previous memory stick 
used, play is resumed automatically with the last 
track played.      
This unit consists of a USB port and an auxiliary 
Jack socket * . The audio fi les are transmitted 
from portable equipment such as a digital player 
or a USB memory stick to your Peugeot Connect 
Sound (RD5) to be listened to via the vehicle's 
speakers.  
   
USB memory stick (1.1, 1.2 and 2.0) or Apple 
® 
 
player of generation 5 or later: 
   
 
-   USB memory sticks should be formatted 
FAT or FAT 32 (NTFS not supported), 
   
-  the Apple 
® 
 player lead is essential, 
   
-   navigation through the fi le database is also 
possible by means of the steering mounted 
controls.  
    
The list of compatible equipment and the compression rates supported 
are available from PEUGEOT dealers.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
USING THE PEUGEOT CONNECT USB 
 
 
CONNECTING A USB MEMORY STICK 
   
Other Apple 
® 
 players of earlier generations and 
players using the MTP protocol * : 
   
 
-   play via Jack-Jack lead only (not supplied), 
   
-   navigation through the fi le database is from 
the portable device.  
 
   
*   
According to vehicle.   

257
3
4
05
2
1
LISTREFRESH
LISTREFRESH
  PEUGEOT CONNECT USB 
 
 
USING THE PEUGEOT CONNECT USB 
 
 
Press LIST briefl y to display the 
previously selected classifi cation. 
  Navigate through the list using the left/
right and up/down buttons. 
  Confi rm the selection by pressing OK.    The lists available are Artist, Genre and Playlist (as defi ned in the 
Apple 
®   player). 
  Selection and Navigation are described in steps 1 to 4 above.  
   
Do not connect a hard disk or USB connection device other 
than audio equipment to the USB port. This could damage your 
installation.  
     
CONNECTING AN APPLE 
® 
 PLAYER VIA THE USB PORT     
Press one of these buttons to gain 
access to the previous/next track on 
the classifi cation list currently being 
played. 
  Press and hold one of the buttons for 
fast forward or backward play.  
   
Press one of these buttons to gain 
access to the previous/next Genre, 
Folder, Artist or Playlist on the 
classifi cation list currently being 
played.      
Press and hold LIST to display the 
different classifi cations. 
  Select by Folder/Artist/Genre/Playlist, 
press OK to select the classifi cation 
required, then press OK again to confi rm. 
   
 
-   by Folder: all folders containing audio 
fi les recognised on the peripheral 
device. 
   
-   by Artist: all of the artist names 
defi ned in the ID3 Tags, classifi ed in 
alphabetical order. 
   
-   by Genre: all of the genres defi ned in 
the ID3 Tags. 
   
-   by Playlist: in accordance with the 
playlists recorded on the USB device.