2012 Peugeot 3008 Hybrid 4 height adjustment

15
FA
M
SITTING COMFORTABLY
Driver's seat

Forwards-backwards
Height


Manual adjustment

76


Electric adjustment

77
Seat back angle

16
FA
M
SITTING COMFORTABLY

Front seats


Head restraint height and angle

Lumbar
78

Steering wheel adjustment



1.
Release the adjustment mechanism.

2.
Adjust for height and reach.

3.
Lock the adjustment mechanism.
As a safety precaution, these opera-
tions must only be carried out when sta-
tionary.
82


Table position (front passenger
seat)
To place objects on the table or to make
the loading of long objects in the vehicle
easier.
79


Front armrest

It contains the Peugeot Connect USB port.
113

FA
M
SITTING COMFORTABLY
Door mirrors
ADJUSTMENT

A.
Selection of the mirror to be adjusted.

B.
Adjustment of the position of the
mirror in the four directions.
83

Rear view mirror


Manual model


1.
Selection of the "day" position of the
mirror.

2.
Adjustment of the mirror.
84

Automatic day/night model


1.
Adjustment of the mirror.
84

Front seat belts



1.
Fastening of the buckle.
136
2.
Height adjustment.

Also...


C.
Folding / Unfolding.

23
FA
M

Head-up display



1.
Head-up display on / off.

2.
Brightness adjustment.

3.
Display height adjustment.

The adjustments must be made
with the ignition on and the Ready

lamp on, with the vehicle stationary.

151
Your vehicle is equipped with a system
which keeps it immobile for a short time
(approximately 2 seconds) to assist you
when starting on a hill, the time required
for you to move your foot from the brake
pedal to the accelerator pedal.
This function is only active:


- when the vehicle has been immobil-
ised completely with your foot on the
brake pedal,

- on certain gradients,

- when the driver's door is closed.

Do not get out of the vehicle
during the hill start assist tem-
porary hold phase.
148
Hill start assist DRIVING SAFELY

CO
76
FRONT SEATS WITH MANUAL
ADJUSTMENTS
Seat consisting of a seat cushion, a seat
back and a head restraint which can all
be adjusted to adapt your position for
ease of driving and comfort.
Height


)
Pull the control upwards to raise
or push it downwards to lower, as
many times as required, to obtain
the position required.



Seat back angle



)
Push the control rearwards.



Forwards-backwards



)
Raise the control and slide the seat
forwards or backwards.

CO
78






Heated seats control




)
Use the adjustment wheel to switch
on and select the level of heating re-
quired:



0
:
Off.

1
:
Low.

2
:
Medium.

3
:
High.

Head restraint height and angleadjustment



)
To raise the head restraint, pull it forwards
and upwards at the same time.

)

To remove the head restraint, press the
lug A
and pull the head restraint upwards.


)
To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the
seat back.

)
To lower the head restraint, press the
lug A
and the head restraint at the same
time.

)
To adjust the angle of the head restraint,
tilt its lower part forwards or rearwards.


The head restraint is fi tted with
a frame with notches which
prevents it from lowering; this
is a safety device in case of impact.

The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.

Never drive with the head restraints
removed; they must be in place and
adjusted correctly.




)
Turn the knob manually to obtain
the desired level of lumbar support.









With the hybrid system active, the front
seats can be heated individually.

CO
82

This system does not work continuous-
ly, but adapts the force of the fan cool-
ing to the requirements of the battery.
Its operation can be heard at the rear,
even if the vehicle is stopped after a
run.
If the air intake is blocked, the battery
may overheat, damaging the battery
and causing a loss of performance of
the hybrid system.
STEERING WHEEL ADJUSTMENT



)
When stationary
, pull the con-
trol lever to release the adjustment
mechanism.

)
Adjust the height and reach to suit
your driving position.

)
Push the control lever to lock the ad-
justment mechanism.
As a safety precaution, these
operations should only be car-
ried out while the vehicle is
stationary.
VOLTAGE BATTERY

For the best use of the high
voltage battery, please follow
these recommendations:


- do not obstruct the air intake with
loose articles, otherwise, the bat-
tery may overheat, causing a loss of
performance of the hybrid system

- do not spill fl uids, as this may
cause damage to the battery.











The high voltage battery has an air
cooling system, comprising an air in-
take located under the left hand rear
seat and a fan behind the left hand boot
trim panel.

VIS
104
In fog or snow, the sunshine
sensor may detect suffi cient
light. In this case, the lighting
will not come on automatically.
Do not cover the sunshine sensor,
coupled with the rain sensor and lo-
cated in the centre of the windscreen
behind the rear view mirror; the as-
sociated functions would no longer
be controlled.

When the automatic illumination of
headlamps function is activated, un-
der low ambient light the dipped beams
headlamps come on automatically when
the ignition is switched off.
Operating fault
In the event of a malfunction of
the sunshine sensor, the lighting
comes on, this warning lamp is
displayed in the instrument panel
and/or a message appears in the screen,
accompanied by an audible signal.
Contact a PEUGEOT dealer or a quali-
fi ed workshop.
MANUAL ADJUSTMENT OF
HALOGEN HEADLAMPS
The initial setting is position "0"
.
To avoid causing a nuisance to other road
users, the height of the halogen headlamps
should be adjusted according to the load in
the vehicle.

0.
1 or 2 people in the front seats.

-.
3 people.

1.
5 people.

-.
Intermediate setting.

2.
5 people + maximum authorised load.

-.
Intermediate setting.

3.
Driver + maximum authorised load.
Automatic "guide-me-home"lighting


Programming
Activation or deactivation, as well as the
duration of the guide-me-home lighting,
is set in the vehicle confi guration menu.