Page 242 of 328
05
240
PRESET A STATION
From the permanent display, press "Memory".
Select a radio station or frequency
(refer to the corresponding section).
Select a number in the list to preset thepreviously chosen radio station.
A long press on this number presets the station.
Recall
pre-set stations
Press MENUto display the " MAIN MENU " then select " Media".
Select "Radio".
RADIO
Select "Memory".
Page 243 of 328
05
241
ACTIVATE / DEACTIVATE RDS
Select " RDS".
Press the MODE
button until the RADIO / MEDIA
display is obtained.
Select Alternative frequencies (RDS).
Select Confi rm.
RD
S, if activated, allows you to continue listening to the same
station by automatic retuning to alternative frequencies. However, incertain conditions, coverage of an RDS station may not be assured
throughout the entire country as radio stations do not cover 100 % of
the territory. This explains the loss of reception of the station during
a journey.
RADIO
Page 244 of 328
05
242
CD, MP3 CD, USB PLAYER, AUXILIARY
Insert the CD in the player, insert the USBmemory stick in the USB player or connect theUSB peripheral to the USB port using a suitablecable (not supplied).
The s
ystem builds playlists (in temporarymemory), an operation which can take froma few seconds to several minutes at the fi rstconnection.
R
educe the number of non-music fi les and the number of folders to reduce the waiting time.
The pla
ylists are updated every time the ignition
is switched off or connection of a USB memory stick. However, the system memorises these
lists and if they are not modifi ed, the loadingtime will be shorter.
Pla
y starts automatically after a period which
depends on the capacity of the USB memory stick.SELECTION OF SOURCE
The steering mounted SRC(source) button can be used to go to thenext media source, available if the source is active.
"CD / CD MP
3"
"
USB, iPod
"
"
Bluetooth (streaming)
"
"Auxiliary
"
"Radio"
Select changing source then choose thesource. Pr
ess the MODE button
until the RADIO / MEDIA
display is obtained.
It is also possible to chan
ge source from the
top bar.
MUSIC
Page 245 of 328
05
243
CD, MP3 CD / USB PLAYER
The audio equipment will only play audio fi les with".wma, .aac, .fl ac, .ogg and .mp3" fi le extensions and with a bit rate of between32 Kbps and 320 Kbps.
It also supports VBR
(Variable Bit Rate) mode.
No other t
ype of fi le (.mp4, .m3u...) can be played.
WMA fi les must be of the standard wma 9 t
ype.
The samplin
g rates supported are 11, 22, 44 and 48 KHz.
It is advisable to restrict fi le names to 20 characters, without usin
g of special characters (e.g.: " " ? ; ù) to avoid any playing and displayingproblems.
In order to be able to play a recorded
CDR or CDRW, whenrecording it is preferable to select the ISO 9660 level 1, 2 or Jolietstandard.
If the disc is recorded in another format it ma
y not be playedcorrectly.
It is recommended that the same recordin
g standard is always used
for an individual disc, with as low a speed as possible (4x maximum)for optimum sound quality.
In the particular case o
f a multi-session CD, the Joliet standard isrecommended.
INFORMATION AND ADVICE
The s
ystem supports USB mass storage or
iPod devices via the USB port (suitable cable not supplied).
Control of the peripheral device is with the
audio system controls.
Other peripherals, not recognised onconnection, must be connected to the auxiliary socket using a Jack cable (not supplied).
In order to be read, a U
SB memory stick must be formatted FAT 16 or 32.
MUSIC
The system does not support the operation of an Apple®
and a USB®
memory stick connected at the same time.
It is recommended that o
ffi cial AppleÆ
USB cables are used toÆ
ensure correct operation.
Page 248 of 328
05
246
USING THE AUXILIARY INPUT (AUX)
Cable not supplied
socket using an audio cable.
First ad
just the volume of your portable device (to a high level). Then
adjust the volume of your audio system.
Displa
y and management of the controls are via the portable device.
Select changing the source.
Press the MODE button until the RADIO
display is obtained.
Select the AUXILIARYsource.Y
MUSIC
Page 249 of 328
05
247
- " Ambience" (choice of 6 musical ambiences)
- " Bass"
-"
Treble"
-
"Loudness" (Activate/Deactivate)
-
"Distribution" (" Driver
", "rAll passengers", " Front speakers only
")
The audio settin
gs ( Ambience
, Bass
, Trebleand Loudness) are
different and independent for each sound source.
The settin
gs for distribution and balance are common to all sources.
The distribution
(or spatialisation using the Arkamys© system)©
of sound is an audio process that allows the audio quality to be
adapted to the number of listeners in the vehicle.
On-board Audio: Arkamys ©Sound Staging.
With
Sound Staging, the driver and passengers are immersed in an
"audio scene" recreating the natural atmosphere of an auditorium:
truly a part of the scene and its surroundings.
This new sensation is made possible b
y software in the audiosystem which processes the digital signals from the media players (radio, CD, MP3…) without changing the audio settings. This
processing takes account of the characteristics of the passenger compartment to produce optimum results.
The Arkam
ys© software installed in your audio system processes ©
the digital signal from the media players (radio, CD, MP3, ...) and
recreates a natural musical scene, with harmonious placement of
instruments and voices in the space in front of passengers, level with
the windscreen.
AUDIO
Select "Audio".
PressMENU to display the " MAIN MENU
", then select " Settings".
Select "Ambience
" or " Distribution".
SETTINGS
Page 251 of 328
249
"Contacts"
"Keypad"
"Call log"
"Contacts"
Access to the "Communications" menu
- List of contacts saved in the telephone.
A1
Press twice to start the call.
- Select information on the contact or the position of the contact
A2 on the map, using their address.
When the information is displayed, press a number to start the call or the address to start navigation.
- Display the list of contacts saved in the vehicle.
A3
- Press to start navigation towards the selected contact, using
A5 their address.
- List of outgoing, missed and incoming calls.
B1
- Details of the call selected.
B2
Press the number to start the call.
- Add a new contact.
B4
- Enter a number using the keypad.
A4
PressCALL to start the call.
- Enter another number.
A41
- "Micro OFF": cut the microphone temporarily so that the contact
A42 does not hear your conversation with a passenger.
- "Privacy mode": transfer to your telephone for a private conversation or to leave the vehicle without ending the call.
- Choose another contact in the list.
A43
- End the call in progress.
A44
- "Switch call": change contact while retaining the current contact.
A45
- "Conference call": accept the incoming call and communicate with more than one person.
- Manage the contact entries saved: B3
- Use the alphabet or the arrows to fi nd a contact by their name. B31
- Create a new contact. B32
- Modify the displayed contact.B33
- Delete the displayed contact.B34
- Delete all the information for the displayed contact. B35
- Contact folder info: entries used or available, percentage of B36 internal directory used and Bluetooth contacts.
Page 253 of 328
251
"Search"
"Settings"
- List of telephones already paired with the audio system. C1
- Display a description of the telephone. C2
- Connect/disconnect the selected telephone. C3
- Start the search for another peripheral so as to connect it to theC4 audio system via Bluetooth.
- Your Bluetooth settings.C7
- Import contacts from the telephone to the audio system.C71
- Make the audio system (telephone, ...) visible externally viaC72 Bluetooth.
Setting the answering time for an incoming call.
"CALL" (shortcut menu)
- List of outgoing, missed and incoming calls. D1
- Delete the selected telephone.
C5
- Import the contacts from the selected telephone to store them in C6 the audio system.
"Bluetooth"
Access to the "Communications" menu (continued)
- Enter an number using the keypad.
D2
Then press "CALL" to start the call.
- List of contacts saved in the telephone.
D3
For more information, refer to the "Contacts" menu.
- End the current call.
D4
- Duration, name and number of the contact for the current call.
D5
- "Switch call": change contact while retaining the current contact. "Conference call": accept the incoming call and communicate with more than one person.
D6
- "Micro OFF": cut the microphone temporarily so that the contact does not hear your conversation with a passenger.
D7
- "Privacy mode": transfer to your telephone for a private conversation or to leave the vehicle without ending the call.
D8
- Quit this shortcut menu.
D9
