2012 Peugeot 208 audio

251
"Search"
"Settings"
- List of telephones already paired with the audio system. C1
- Display a description of the telephone. C2
- Connect/disconnect the selected telephone. C3
- Start the search for another peripheral so as to connect it to theC4 audio system via Bluetooth.
- Your Bluetooth settings.C7
- Import contacts from the telephone to the audio system.C71
- Make the audio system (telephone, ...) visible externally viaC72 Bluetooth.
Setting the answering time for an incoming call.

"CALL" (shortcut menu)

- List of outgoing, missed and incoming calls. D1
- Delete the selected telephone.
C5
- Import the contacts from the selected telephone to store them in C6 the audio system.
"Bluetooth"


Access to the "Communications" menu (continued)
- Enter an number using the keypad.
D2
Then press "CALL" to start the call.

- List of contacts saved in the telephone.
D3
For more information, refer to the "Contacts" menu.
- End the current call.
D4
- Duration, name and number of the contact for the current call.
D5
- "Switch call": change contact while retaining the current contact. "Conference call": accept the incoming call and communicate with more than one person.
D6
- "Micro OFF": cut the microphone temporarily so that the contact does not hear your conversation with a passenger.
D7
- "Privacy mode": transfer to your telephone for a private conversation or to leave the vehicle without ending the call.
D8
- Quit this shortcut menu.
D9

06
252

The " Hands-free" profi le should be used in preference if "Streaming"
is not desired.

The abilit
y of the system to connect with only one profi le depends on
the telephone. The two profi les may both connect by default.















PAIRING A BLUETOOTH TLEPHONE
FIRST CONNECTION
For reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth
mobile telephone to the hands-free system of the audio unit must becarried out with the vehicle stationary
.
Select " Bluetooth".
Press MENU
to display the "MAIN MENU" thenselect "Communications".
SelectSearch.
The list of peripherals detected is displayed.
Activate the telephone's Bluetooth
function and ensure that it is "visible to all" (telephoneconfi guration).

The system offers to connect the telephone:
-
in"All profi les" (for selection of both profi les).
-
in "Telephone (hands free)" profi le (telephone only),

-
in "Streaming Audio
" profi le (streaming: playing music fi les on
the telephone),

Select and confi rm.
Select the name of the desired peripheral from
t
he list and Confi rm.

Visit www.peugeot.co.uk for more information (compatibility,
additional help, ...).
BLUETOOTH

06
257






RINGTONES

Select "Audio".
Press MENU
to display the " MAIN MENU " then select "
Settings".

Select "Ringtones".


You can select the ringtone used and adjust its volume.
Select " Contacts".

Press Menu to display the " MAIN MENU
" then select " Communications
".

Select " Files".
Select:
-
"New" to add a new contact.
-
"Modify" to edit the selected contact.
- "
Delete
" to delete the selected contact.
- "
Delete all
" to delete all of the informationfor the selected contact.
Select "Confi rm
".


Select " Directory status" for the number of entries used, available, ...



MANAGING CONTACTS / ENTRIES
SETTINGS

261

Access to the "Settings" menu (continued)
"Vehicle settings"
"VEHICLE DIAGNOSTICS"
- List of faults detected (depending on version) in the vehicle. B3
For more information on a setting, refer to the section on
the corresponding function.
"Speed memorised"
- Memorise speed settings for use by the cruise control or speedB4 limiter.- Choose from the categories: "Driving assistance", "Vehicle B1 access", "Lighting". If no family is chosen, the complete list of functions is displayed.
- Select the function, a descriptive text and image provides detailsB2 of the function. The settings of some can be adjusted.
Select/deselect to activate/deactivate the function.
- Choose a speed to see the details. Press again to select it. B41
- With the speed(s) selected, press "Activate speed" to memorise B42 the speeds.
To deactivate all speeds, press "Activate speed".
- Select or deselect all speeds.B43
- Programme the speeds with default values.B44
- Modify the speed selected.B45
"Audio"
- Distribution: set the dominant position for sound in the vehicleC2 making use of the Arkamys©
system.
Move the point between the left (L) / right (R) and front (F) / rear (R).
- Choose the sound level when you touch the screen with a fi nger C3 (keypad beep). Activate the sound level depending on vehicle
speed.
- Choose the audio ambience (Jazz, Classic, Pop Rock, Techno,C1 Vocal) or personalise the ambience with treble / bass andactivate loudness.
- Choose the volume for the voice giving the names of streets.
C5
"Ambience"


"Ringtones"


- Choose the melody and the volume for the ringtone used for an
C4 incoming call.

The following table groups together the answers to the most frequently asked questions concerning your audio system.
FREQUENTLY ASKED QUESTIONS
264
QUESTIONANSWER SOLUTION
The route calculation is not successful. The guidance criteria may confl ict with the current location (exclusion of
toll roads on a toll motorway). Check the guidance criteria on the Navigation Menu, "Guidance options" "Defi ne calculation criteria".
The P
OIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs.
The P
OIs have not been downloaded. Download the POIs from the website:
"http://peugeot.navigation.com".

The speed camera
audible warning does not
w
ork.
The audible warning is not active. Activate audible warnings in the Guidance options menu, "Navigation - guidance", "Set parameters for risk areas".
The s
ystem does notsuggest a detour around an incident on the route. The
guidance criteria do not take account of TMC messages. Select the "Traffi c info" function in the list of guidance criteria.
I receive a speed camera
alert
for a speed camera
which is not on my route.
Other than guidance, the system announces all speed cameras
positioned in a cone located in front of the vehicle. It may provide an alert
for speed cameras located on nearby or parallel roads. Zoom in on the map to view the exact position o
f
the speed camera. Select "On the route" to nolonger receive alerts other than guidance or to reduce the time for the announcement.

FREQUENTLY ASKED QUESTIONS
265
QUESTIONANSWERSOLUTION
Certain traffi c jams
along the route are not
indicated in real time.
On starting, it is several minutes before the system begins to receive the
traffi c information. Wait until the traffi c information is being received correctly (display of the traffi c information icons on
the map).
Th
e fi lters are too restrictive. Modify the "Geographic fi lter" settings.
In certain countries, onl
y major routes (motorways...) are listed for the
traffi c information. This phenomenon is normal. The system is
dependent on the traffi c information available.
Th
e altitude is not
displayed. On starting, the initialisation of the GPS may take up to 3 minutes toreceive more than 4 satellites correctly. Wait until the system has started up completely.
Check that there is a GPS coverage of at least
4 satellites (long press on the SETUP button, then select "GPS coverage").
Dependin
g on the geographical environment (tunnel...) or the weather,
the conditions of reception of the GPS signal may vary. This phenomenon is normal. The system
is dependent on the GPS signal receptionconditions.
I cannot connect m
yBluetooth telephone.The telephone's Bluetooth function may be switched off or the telephone
may not be visible.
- Check that your telephone's Bluetoothfunction is switched on.

- Check in the telephone settin
gs that it is "visible to all".
The Bluetooth telephone is not compatible with the system.
A list of compatible Bluetooth mobile telephones is available from the dealer network.
Th
e volume of thetelephone connected
in Bluetooth mode isinaudible. The volume depends both on the s
ystem and on the telephone. Increase the volume of the audio system, tomaximum if required, and increase the volume of
the telephone if necessary.
The ambient noise level has an in
fl uence on the quality of telephone communication. Reduce the ambient noise level (close the windows,reduce the booster fan speed, slow down, ...).

FREQUENTLY ASKED QUESTIONS
266
QUESTIONANSWER SOLUTION
Some contacts areduplicated in the list.The options for synchronizing contacts are synchronizing the contacts
on the SIM card, the contacts on the telephone, or both. When both
synchronizations are selected, some contacts may be duplicated. Select "Displa
y SIM card contacts" or "Displaytelephone contacts".

Contacts are not shown
in alphabetical order.Some telephones offer display options. Depending on the settingschosen, contacts can be transferred in a specifi c order. Modify the display setting in the telephone
directory.
The system does not
receive SMS text messages. The Bluetooth mode does not permit sending SMS text messages to the
system.
The
CD is ejected
automatically or is not played by the player. The
CD is inserted upside down, is unplayable, does not contain any audio data or contains an audio format which the player cannot play.
- Check that the CD is inserted in the player the
right way up.

-
Check the condition of the CD: the CD cannot
be played if it is too damaged.

-
Check the content in the case of a recordedCD: consult the advice in the "Audio" section.

- The audio s
ystem's CD player does not play DVDs.

-
Some recorded CDs will not be played by
the audio system because they are not of thecorrect quality. Le CD has been recorded in a format that is not compatible with the pla
yer.
The CD is protected b
y an anti-pirating protection system which is not recognised by the audio system.
There is a long waiting
period following the insertion of a CD or connection of aUSB memory stick.
When a new medium is inserted, the system reads a certain amount of
data (directory, title, artist, etc.). This may take from a few seconds to a
few minutes. This
phenomenon is normal.
The
CD player sound ispoor.The CD used is scratched or of poor quality. Insert good quality CDs and store them in suitable conditions.
The audio equipment settin
gs (bass, treble, ambiences) are unsuitable. Set the treble or bass level to 0, without selectingan ambience.

FREQUENTLY ASKED QUESTIONS
267
QUESTIONANSWERSOLUTION
Some characters in themedia information are not
displayed correctly while playing. The audio s
ystem does not display some types of characters. Use standard characters to name tracks andfolders.
Pla
ying of streaming fi lesdoes not start. The peripheral device connected does not support automatic play. Start the playback from the device.
Th
e names of tracks and
the track length are not
displayed on the screen
when streaming audio. The Bluetooth
profi le does not allow the transfer of this information.
The qualit
y of receptionof the radio station
listened to graduallydeteriorates or the stored stations do not function(no sound, 87.5 Mhz is
displayed...). The vehicle is too
far from the transmitter used by the station listened
to or there is no transmitter in the geographical area through which the
vehicle is travelling.
Activate the "RDS" function by means of theshort-cut menu to enable the system to check
whether there is a more powerful transmitter in thegeographical area.
The environment
(hills, buildings, tunnels, basement car parks...) block reception, including in RDS mode. This phenomenon is normal and does not indicate
a fault with the audio system.
The aerial is absent or has been dama
ged (for example when goingthrough a car wash or into an underground car park). Have the aerial checked by a PEUGEOT dealer.
I
cannot fi nd some radiostations in the list of stations received.The station is not received or its name has chan
ged in the list.
Some radio stations send other information in place of their name (the
title of the song for example).
The s
ystem interprets this information as the name of the station.
The name of the radio station changes.