2012 PEUGEOT 107 gearbox

42Driving
The position of the gear lever ( R
, N
, Eor M )
and the gear engaged (1 to 5 ) are displayed in
the instrument panel screen.




















2 Tronic gearbox
Reverse "R". This gear will beengaged when stationary or at a
speed below approximately 4 mph (6 km/h).
Engagement of reverse gear is accompanied
by an audible signal.


Moving off

With the parking brake applied, press the brakepedal then select position Nto star t the engine.
With your foot on the brake, select position R , Eor M.
Release the parking brake, take your foot off
the brake
pedal, then accelerate. The
five-speed 2 Tronic gearbox gearbox offersa choice between the ease of automated
operation
or the driving pleasure of manual
gear changing.
You can chan
ge from position Eto position Mand vice versa at any time.
Gear lever positions
Select the driving mode by moving the gear
lever.
N eutral "N".
Position the lever to the right inposition N, to star t the engine.
E
asy "E": automatic gear changing.
M
anual (+ / -) "M": manual gear changing.


Steering mounted control
paddles
Press behind the +steering mounted control
paddle to change up.
Press behind the -steering mounted control
paddle to change down.
With the engine running, in these three positions, an audible signal is heard when the driver's door is opened.

Display in the instrument panel

5
43 Driving

EASY mode (automatic
mode)
Select position E
using the gear lever.
The gear engaged is displayed in the
instrument panel screen.
The gearbox continuously selects the mostsuitable gear.
Manual mode
Place the gear lever in position M, then changeup or down using:
- the gear lever, pushing:


- rearwards, "+"to change up,

- forwards, "-"to change down.
- or the steering mounted controls paddles.
The gear engaged is displayed on the
instrument panel screen.
If the engine speed is too low, the gearbox automatically changes down to prevent stalling.
In the event of overheating of the clutch, position N is selected automatically and the
symbol N flashes accompanied by an audible
signal.


Operating fault
Stoppin
g the engine

Before switching off the engine, you can change to position Nto be in neutral.
In all cases, it is essential that you apply the
parking brake to immobilise the vehicle.
With the i
gnition on, illumination
of this warning lamp indicates a gearbox fault.

Contact a PEUGEOT dealer or a qualified
workshop.

Stopping - Moving off on a
slo
pe
The gearbox is an electronically controlledmanual gearbox without a clutch pedal.
To hold the vehicle on a slope, it is necessary
to use the brake pedal or the parkin
g brake and not the accelerator pedal.
When moving off on a slope, accelerateprogressively while releasing the parking brake.

Always press the brake pedal while starting the engine.
Never select neutral N
while the vehicle is moving.In all cases, it is essential to apply the parking brake to immobilise the vehicle.

On a slope, use the brake to immobilisethe vehicle and place the gear lever in position N , E
or R.
Do not keep the vehicle immobilisedusing the accelerator.

If you press the accelerator pedal beyond the point of resistance, the2 Tronic gearbox gearbox changes
down for sharper acceleration.
Te m p o r a r i ly taking control of gear changes
You can temporarily take control of gear changes using the "+"and "-"
steering
mounted controls; if the engine speed allows,
the
gear change command is acted on.
This function allows you to anticipate cer tain
situations such as over taking a vehicle or approaching a corner.
After a few moments with no action on thecontrols, the gearbox returns to automaticcontrol of the gears.

9
65 Practical information
)As far as possible, immobilise the vehicle
on level, stable, non-slippery ground. )Apply the parking brake, switch off the
ignition and engage first gear or reverse
for the manual gearbox, position Nfor the2 Tronic gearbox. The followin
g tools are installed in a carrier,
located in the centre of the spare wheel:
1
. Wheelbrace 2.Jack with handle 3.Removable towing eye

Access to the spare wheel and
the jack in the boot
) Remove the carpet then the plastic cover using the handle.



Tyre pressures

These are indicated on the label positioned on the inner pillar of the left door, see
"Identification markings".



























Changing a wheel
)
If necessary, chock the wheel diagonally
opposite the wheel to be changed.) You must ensure that the occupants leave
the vehicle and wait in a safe location.

Parking the vehicle
To o l s

9
73 Practical information
* Fuses located behind the instrument panel. To change them, contact a PEUGEOT dealer or a qualified workshop.
FuseN°Rating(A)Functions
110Brake lamps - ABS - 2 Tronic gearbox
225Central locking/unlocking - Remote control
320Rear screen demisting
47.5Rear lamps - Number plate lamps - Instrument panel - Screen - headlamp adjustment - LED daytime runninglamps - Sidelamps
57.5Diagnostic socket
67.52 Tronic gearbox - Rear foglamp - ESP - LED daytime running lamps - Instrument panel - Rev counter
7-Not used
87.5
ABS/ESP - Power steering - Fan assembly
910Reversing lamps - Central locking/unlocking - Electric windows - Rear screen demisting - Speedometer - Air conditioning - Heating - Rev counter - Remote control
1020Front and rear wipers and screenwash
1115
Audio equipment - 12 V socket (120 W max)
127.5Heated rear screen - ABS - Fan assembly - Front and rear wipers and screenwash - Power steering - Central locking/
unlocking - Air conditioning - Heating - Electric windows - Speedometer - Rev counter - Remote control - Reversing lamp
1315
Airbag - Fuel injection system - 2 Tronic gearbox - Instrument panel - Rev counter - LED daytime running lamps
147.5 Air conditioning - Heating
15 *40
Audio system - 12 V socket - Front and rear wipers - Power steering - ABS/ESP - Cooling fan assembly
16 * 30Electric windows
17 *40
Air conditioning - Heating

9
75 Practical information
FuseN°Rating(A)Functions
15 LED daytime running lamps
220
Front foglamps
310
Left hand front lamp
410
Right hand front lamp
57.5 2 Tr o n i c gearbox - Fuel injection system
67.5
2 Tronic gearbox - Fuel injection system


730
LED daytime running lamps - Front foglamps
825
ABS
30
ABS/ESP (with VSC)
930
Starter motor - Heated rear screen - ABS -Cooling fan assembly - Front and rear wipers and screenwash - Power steering - Central locking/unlocking - Air conditioning - Heating - Electric windows - Speedometer -Rev counter - Remote control - Reversing lamp - Airbag - Fuel injection system - 2 Tronic gearbox - Instrument panel - LED daytime running lamps
FuseN°Rating(A)Functions
1010 Hazard warning lamps - Instrument panel - Rev counter - Direction indicators
1120
Left hand front lamp - Right hand front lamp
1215 Cour tesy lamp - Speedometer - Audiosystem- Instrument panel - Rev counter
1315
Fuel injection system - Cooling fan assembly
1410
Horn
157.5
Replacement fuse
1610
Replacement fuse
1715
Replacement fuse
1850 2 Tr o n i c gearbox
1930/40 Cooling fan assembly
20
40 ABS
50 ABS/ESP (with VSC)
2150
Power steering

9
77 Practical information









Charging the battery using
a battery charger
)Disconnect the battery from the vehicle.
)Follow the instructions for use provided by
the manufacturer of the charger.)Connect the battery star ting with thenegative terminal (-).)Check that the terminals and connectorsare clean. If they are covered with sulphate (whitish or greenish deposit), remove themand clean them.

The batteries contain harmful substances such as sulphuric acidand lead. They must be disposed of inaccordance with regulations and mustnot, in any circumstances, be discarded with household waste.
Take used remote control batteries andvehicle batteries to a special collection point.
Do not push the vehicle to star t the engine if you have a 2 Tronic gearbox.

It is advisable to disconnect the batteryif the vehicle is to be left unused for more than one month.


Do not reverse the polarity and use onlya 12 V charger.
Do not disconnect the terminals whilethe engine is running.
Do not charge the batteries withoutdisconnecting the terminals first.

80Practical information





Towing the vehicle
)
Install the towing bar. )
Put the gear lever into neutral (position Nfor the 2 Tronic gearbox).
)Take the removable towing eye stowed in
the spare wheel, under the boot carpet.
)Unclip the plastic cover. )Fully screw in the towing eye.

General
recommendations
Observe the legislation in force in your country.Ensure that the weight of the towing vehicle is higher than that of the towedvehicle.The driver must stay at the wheel of thetowed vehicle. Driving on motorways and fast roads is prohibited when towing.When towing a vehicle with all four wheels on the ground, always use an approved towing bar; rope and strapsare prohibited.When towing a vehicle with the engine off, there is no longer any power assistance for braking or steering.In the following cases, you must always call on a professional recovery service:- vehicle broken down on a motor way
or fast road,- when it is not possible to put the gearbox into neutral, unlock thesteering, or release the parkingbrake,- towing with only two wheels on theground, - where there is no approved towingbar available...

Your vehicle can only be towed at the front.
Never use the radiator crossmember.
To w i ng with fours wheels on theroad must be carried out at very low speed over a very shor t distance (in accordance with the legislation in force).
In all other cases, your vehicle must betranspor ted on a trailer.

Failure to obser ve this instruction maylead to damage to cer tain components (braking, transmission, ...) and the absence of braking assistance when theengine is started.
)
Unlock the steering by turning the key to
the first position and release the parkingbrake. ) Switch on the hazard warning lamps onboth vehicles.

88Checks






Checks






2 Tronic gearbox















Brake pads
Unless other wise indicated, check thesecomponents in accordance with the servicingbooklet and according to your engine.
Other wise, have them checked by a PEUGEOT
dealer or a qualified workshop.
12 V battery
Oil filter
Manual gearbox
Only use products recommended byPEUGEOT or products of equivalent quality and specification.
In order to optimise the operation of units as impor tant as the brakingsystem, PEUGEOT selects and offers very specific products. To avoid damaging the electrical units, the use of a high pressure washer in the engine compar tment is strictlyprohibited.
Air filter and passenger compartment filter

Brake disc wear
Parkin
g brake
The battery does not require any maintenance.
However, check that the terminals are clean
and correctl
y tightened, particularly in summer and winter.
When carrying out work on the battery, refer to the "Practical information" section for details of the precautions
to be taken before disconnecting the battery and following its reconnection.

Refer to the ser vicing booklet for
details of the replacement intervals
for these components.
Dependin
g on the environment (e.g.
dusty atmosphere) and the use of the vehicle (e.g. city driving), replace them twice as often if necessary.y A clogged passenger compar tment filter mayhave an adverse effect on the performance
of the air conditioning system and generate undesirable odours.
Replace the oil
filter each time theengine oil is changed.
Refer to the ser vicing booklet for
details of the replacement inter val for
this component.
The gearbox does not require any maintenance (no oil change).
Refer to the ser vicing booklet for the
details of the level checking intervalfor this component.
The
2 Tr o n i c gearbox does not require
any maintenance (no oil change).
Refer to the servicing booklet for
details of the checking inter val for
this unit.
Brake wear depends on the st
yle
of driving, par ticularly in the case
of vehicles used in town, over shor t
distances. It ma
y be necessary to
have the condition of the brakes checked
, even between vehicle services.
Unless there is a leak in the circuit, a drop in
the brake fluid level indicates that the brake pads are worn. For information on checkin
g brake
disc wear, contact a PEUGEOT
dealer or a qualified workshop.

I
f excessive travel or a loss of effectiveness of this system is
noticed, the parking brake must be checked, even between two services.
Checking this system must be done by a
PEUGEOT dealer or a qualified workshop.