2012 NISSAN X-TRAIL API


> (GLW    0RGHO 7$@
2. Select heatrange.
.
For high heat, push theHI(High) sideofthe
switch
*
1
.
.
For low heat, push theLO (Low) sideofthe
switch
*
2
.
.
The indicator light
*
3
will illuminate whenlow
or high isselected.
3. To turn offthe heater, returntheswitch tothe level
position. Makesuretheindicator lightturns off.
The heater iscontrolled byathermostat, auto-
matically turningtheheater onand off.The
indicator lightwillremain onaslong asthe switch
is on.
When thevehicle's interioriswarmed, orbefore
you leave thevehicle, besure toturn offthe
switch.
CAUTION:
. The battery couldrundown ifthe seat heater
is operated whiletheengine isnot running.
. Do not use theseat heater forextended
periods orwhen noone isusing theseat.
. Do not putanything onthe seat which
insulates heat,suchasablanket, cushion,
seat cover, etc.Otherwise, theseat may
become overheated.
. Donot place anything hardorheavy onthe
seat orpierce itwith apin orsimilar object.
This may result indamage tothe seat heater.
. Any liquid spilled onthe heated seatshould
be removed immediately withadry cloth.
. When cleaning theseat, never usegasoline,
thinner, orany similar materials.
SECOND ROWSEATS
T32A1308 27-3C9448 50-5F36-4EC0 -8FC1-B5D4740BE525
Adjustment
T32A130 827-C4C392 1B-4C08-4E61-8F01-E53B D4BE934 E
JVR0330X
Forward andbackward:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Pull upthe adjusting lever
*
1
.
2. Slide theseat tothe desired position.
3. Release theadjusting lever
*
1
to lock theseat in
position.
Reclining:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Pull theadjusting lever
*
2
.
2. Tiltthe seatback tothe desired position.
3. Release theadjusting lever
*
2
to lock the
seatback inposition.
The reclining featureallowstheadjustment ofthe
seatback foroccupants ofdifferent sizestohelp obtain
the proper seatbeltfit.(See ªSeat beltsº (P.1-9) .)
The seatback maybereclined toallow occupants to
rest when thevehicle is
parked.
JVR0376X
Folding:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Forvehicles notequipped withthird rowseat: Pull
up the lever
*
1
and foldtheseatback flat.
For vehicles equipped withthird rowseat: Pullup
the lever
*
1
and pullthestrap
*
2
on the lower
side ofthe outboard seatstofold theseatback flat.
2. To return theseats toaseating position, pushup
on the seatback untilitlatches inplace.
WARNING:
. Never allowanyone toride inthe luggage
area oron the rear seats when theyarein
the fold-down position.Useofthese areas
by passengers withoutproperrestraints
could result inserious injuryinan accident
or sudden stop.
. Donot fold down thesecond rowseats when
occupants areinthe second rowseat area or
any luggage ison the second rowseats.
. Properly secureallluggage tohelp prevent it
from sliding orshifting. Donot place lug-
gage higher thantheseatbacks.
Safety Ðseats, seatbelts andsupplement alrestraint system
1-5
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
WARNING:
. The shoulder beltanchor heightshould be
adjusted tothe position bestforyou. Failure
to do somay reduce theeffectiveness ofthe
entire restraint systemandincrease the
chance orseverity ofinjury inan accident.
. The shoulder beltshould restonthe middle
of the shoulder. Itmust notrest against the
neck.
. Besure thattheseat beltisnot twisted in
any way.
. Be sure thattheshoulder beltanchor is
secured bytrying tomove theshoulder belt
anchor upand down afteradjustment.
The shoulder beltanchor heightshould beadjusted to
the position bestforyou.
The belt should beaway fromyourfaceandneck, but
not falling offyour shoulder.
T o adjust, pulltherelease button
*
1
and move the
shoulder beltanchor tothe proper position
*
2
, so that
the belt passes overthecenter ofthe shoulder.
Release thebutton tolock theshoulder beltanchor
into position.
Unfastening seatbelts
T32A1308 27-6CC264E 9-D8AD-4962 -9D73-34F9C8D92938
Push thebutton onthe buckle. Theseat belt
automatically retracts.
Belt hook (ifequipped)
T32A130827- 702349E6-D2F 9-4807-B5A0-7C9EC 0BE7832
JVR0353X
Seat beltcanbehooked onthe belt hook.
Checking seatbeltoperation
T32A1308 27-71A5C 13C-A297- 4A48-8CD6-F B07919F9DB4
Seat beltretractors aredesigned tolock seat belt
movement:
. When theseat beltispulled quickly fromthe
retractor.
. When thevehicle slowsdownrapidly .
T o increase yourconfidence inthe seat belts, check
the operation bygrasping theshoulder beltandpulling
forward quickly.The retractor shouldlockandrestrict
further beltmovement. Ifthe retractor doesnotlock
during thischeck, contact aNISSAN dealerimmedi-
ately .
SEA TBEL TMAINTENANCE
T32A1308 27-091995 35-EE25-4EAC -9D54-D0AED305C354
Periodically checkthattheseat beltandallthe metal
components, suchasbuckles, tongues, retractors,
flexible wiresandanchors, workproperly .If loose parts,
deterioration, cutsorother damage onthe seat belt
webbing isfound, theentire seatbeltassembly should
be replaced.
If dirt builds upinthe shoulder beltguide ofthe seat
belt anchors, theseat belts mayretract slowly.Wipe
the shoulder beltguide withaclean, drycloth.
T o clean theseat beltwebbing, applyamild soap
solution orany solution recommended forcleaning
upholstery orcarpet. Thenwipewithacloth andallow
the seat belts todry inthe shade. Donot allow theseat
belts toretract untilthey arecompletely dry.
Safety Ðseats, seatbelts andsupplementa lrestraint system
1-13
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
1-20
Safety Ðseats, seatbelts andsupple mental restraint system
CHILD RESTRAINT ANCHORAGE (forsec-
ond rowseats)
T32A1308 27-2B9CCB1 1-46FB-4315-B086- 05B2E330A 092
Y our vehicle isdesigned toaccommodate achild
restraint systemonthe second rowseat. When
installing achild restraint system,carefully readand
follow theinstructions inthis manual andthose
supplied withthechild restraint system.
WARNING:
. Child restraint anchorages aredesigned to
withstand onlythose loadsimposed by
correctly fittedchildrestraints. Underno
circumstances arethey tobe used foradult
seat belts, harnesses orfor attaching other
items orequipment tothe vehicle. Doingso
could damage thechild restraint an-
chorages. Thechild restraint willnotbe
properly installed usingthedamaged an-
chorage, andachild could beseriously
injured orkilled inacollision.
. The child restraint toptether strapmaybe
damaged bycontact withthetonneau cover
(if equipped) oritems inthe luggage area.
Remove thetonneau coverfromthevehicle
or secure itand anyluggage. Your child
could beseriously injuredorkilled ina
collision ifthe top tether strapisdamaged.
Anchorage location
T32A130 827-22786 013-5A06-45 66-964F-9F5FF4AF100 9
JVR0326X
T ype A
JVR0366X
T ype B(example)
Anchorages arelocated asillustrated.
P osition thetop tether strapoverthetop ofthe
seatback andsecure itto the tether anchorage that
provides thestraightest installation. Tightenthetether
strap according tothe manufacturer's instructionto
remove anyslack.
CHILD RESTRAINT INSTALLA TION USING
ISOFIX
T32A130 827-8C4D26 8B-3C47-4D79-AE65-5ADCF8852558
WARNING:
. Attach ISOFIX childrestraints onlyatthe
specified locations. FortheISOFIX lower
anchor locations, seeªISOFIX childrestraint
system (forsecond rowseats)º (P.1-19) .If a
child restraint isnot secured properly, your
child could beseriously injuredorkilled in
an accident.
. Donot install childrestraints thatrequire the
use ofatop tether straptoseating positions
that donot have atop tether anchor.
. Donot secure achild restraint inthe center
rear seating position usingtheISOFIX lower
anchors. Thechild restraint willnotbe
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
Small lightindicator light
T32A1308 27-952927 B8-E86D-40 A0-ADA2-5ED657B0A 0DE
The light illuminates whentheheadlight switchis
turned to
the
position.
SPORT modeindicator light(if
equipped)
GUID-49D 371AC-80 67-4316-8AB D-88BA45B995CE
The SPORT modeindicator lightilluminates whenthe
SPORT modeisturned ªONº.(See ªDriving with
Continuously Variable Transmission (CVT)º(P.5-13)
for the use ofthe SPORT modeswitch.)
T railer direction indicatorlight(if
equipped)
GUID-588 27E84-89C9 -468A-8CE3-E00B748 76BDA
The light willilluminate whenever anadditional
electrical loadisdetected bythe direction indicator
system.
For additional information, seeªTrailer towing (for
Australia, NewZealand, SouthAfricaandEurope)º
(P .5-52) .
T urn signals/hazard indicatorlights
T32A1308 27-AEE83761-686F-46 6B-B3B8-EDF8D7DC0 C36
The turn signals/hazard indicatorlightsblinkwhen the
turn signal switch orhazard indicator flasherswitchis
turned on.(See ªHeadlight andturn signal switchº
(P .2-39) orªHazard indicator flasherswitchº (P.6-2) .)
V ehicle Dynamic Control(VDC)off
indicator light(except forEurope)/Electronic
Stability Program (ESP)offindicator light(for
Europe)
GUID-10 C0347A-5993 -4CEC-84D6-C6D36D4 E64D2
When theignition switchisin the ªONº position, the
V ehicle Dynamic Control(VDC)/Electronic Stability
Program (ESP)offindicator lightilluminates andthen
turns off.
The VDC/ESP offindicator lightilluminates whenthe
VDC/ESP offswitch ispushed tothe ªOFFº position.
When theVDC/ESP offswitch ispushed tothe ªOFFº
position, theVDC/ESP systemisturned off.
For details, seeªVehicle Dynamic Control(VDC)/
Electronic StabilityProgram (ESP)systemº (P.5-26) .
AUDIBLE REMINDERS
T32A1308 27-39FBB3 CF-11CD-4D A8-9DB3-FBA F4F2E2596
Brake padwear warning
T32A1308 27-2C378ED 7-F157-4822 -BCF0-6E95CAA4B880
The disc brake padshaveaudible wearwarnings.
When abrake padrequires replacement, itwill make a
high pitched scraping soundwhenthevehicle isin
motion. Thisscraping soundwillfirst occur onlywhen
the brake pedalisdepressed. Aftermore wearofthe
brake pad,thesound willalways beheard evenifthe
brake pedal isnot depressed. Havethebrakes
checked assoon aspossible ifthe wear warning
sound isheard.
Have thesystem checked, andifnecessary repaired,
by aNISSAN dealerpromptly .(See ªBrakesº (P.8-
15) .)
Intelligent Key buzzer (ifequipped)
T32A130 827-4A0804 B9-235D-48CF-8FEE-2 4C2BB97CE26
The Intelligent Key buzzer sounds ifany one ofthe
following improperoperations isfound.
. The ignition switchisnot returned tothe ªLOCKº
position whenlocking thedoors.
. The Intelligent Key isleft inside thevehicle when
locking thedoors.
. Any doors arenot closed securely whenlocking
the doors.
When thebuzzer sounds, besure tocheck boththe
vehicle andtheIntelligent Key .(See ªIntelligent Key
systemº (P.3-10) .)
Light reminder chime
T32A1308 27-6F4DC6 D7-A8DC-4 6E9-8460-5 5E269AD82 EA
The chime willsound ifthe driver's sidedoor isopened
while theheadlight switchisin either the
or
position andtheignition switchisin the ªOFFº or
ªL OCKº position.
Be sure toturn thelight switch tothe ªOFFº orªAUT Oº
(if equipped) positionwhenyouleave thevehicle.
Parking brakereminder chime
T32A130 827-0DD91 978-046D-4BBA-9DC9-E 4F062F1D5B0
The chime willsound ifthe vehicle isdriven atmore
than 7km/h (4MPH) (models notequipped with
electronic parkingbrake)or4km/h (2MPH) (models
equipped withelectronic parkingbrake)withthe
parking brakeapplied. Stopthevehicle andrelease
the parking brake.
Instrume ntsand controls
2-19
&RQGLWLRQ
([FHSWIRU&KLQD


 
> (GLW    0RGHO 7$@
2-60
Instrument sand controls
T ONNEAU COVER(ifequipped)
T32A130827-B 65E2369-D26A-4207-9 A36-6345D2 9FE264
JVI0955X
The tonneau coverkeeps theluggage compartment contents
hiddenfromtheoutside.
T o use thetonneau cover,opentheflap
*
1
, pull itout
*
2
and insert bothsides tothe guide
*
3
.
T o remove thetonneau cover,stowthecover andpull
the holder
*
4
.
WARNING:
. Never putanything onthe tonneau cover,no
matter howsmall. Anyobject onitcould
cause aninjury inan accident orsudden
stop.
. Donot leave thetonneau coverinthe vehicle
with itdisengaged fromtheholder.
. The child restraint toptether strapmaybe
damaged bycontact withthetonneau cover
or items inthe luggage area.Remove the
tonneau coverfromthevehicle orsecure it
in the luggage area.Alsosecure anyitems in
the luggage area.Your child could be
seriously injuredorkilled inacollision if
the top tether strapisdamaged.
T32A1308 27-C6B218 0B-8BDB-4771-B0A2 -5D1F084D16 D7
JVI0889X
Luggage canbecarried onthe roof bysecuring
crossbars tothe roof rail.Follow allcrossbar manu-
facturers instructions forinstalling anduseofthe
crossbars. Theroof railisdesigned tocarry loads
(luggage pluscrossbars) below100kg(221 lb).
Overloading maycause damage tothe vehicle.
CAUTION:
. Donot putorhang anything onoraround
side pipes orplastic covers.
. For crossbar installation onaroof railwith
driving lights,contact aNISSAN dealer.
ROOF RAIL(ifequippe d)
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3-20
Pre-driving checksandadjustments
GUID-17F A495C-3D75-4AC6- BDA1-CF035 C5BC711
Y our vehicle haseither orboth ofthe following security
systems:
. Theft warning
. NISSAN Anti-theft System(NATS)*
The security condition willbeshown bythe security
indicator light.
(* immobilizer)
THEFT WARNING SYSTEM (ifequipped)
GUID-76 C0FFDE-576D -4F0F-954F-F551549C6BCD
The theft warning systemprovides visualandaudio
alarm signals ifparts ofthe vehicle aredisturbed.
Security indicator light
GUID-4DC D2AF1-FA12-44F6 -BC69-8E08 33CCECA6
SIC2045
The security indicator light,located onthe meter panel,
operates whenever theignition switchisin the ªLOCKº
or ªOFFº position. Thisisnormal.
For models withultrasonic sensor
GUID-607 4FDDD-A03 E-4D79-AE83- 4F6D45B64020
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
2. Place theignition switchinthe ªOFFº position.
3. Carry theremote controller orthe Intelligent Key
with youand getoutofthe vehicle.
4. Make surethehood andtheback doorareclosed.
Close andlock alldoors withtheremote
controller, theIntelligent Key orthe request switch.
If a door orthe hood isopen, thebuzzer will
sound. Thebuzzer willstop when thedoor is
correctly closed.
5. Confirm thatthesecurity indicator lightcomes on.
The security indicator lightblinks rapidly for
approximately 20seconds andthen blinks slowly.
The system isnow activated. If,during this20-
second timeperiod, thedoor isunlocked bythe
remote controller, theIntelligent Key orthe request
switch, orthe ignition switchisplaced inthe ªONº
position, thesystem willnot activate.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors locked andtheignition switchoff.Place
the ignition switchinthe ªONº position toturn
the system off.
If the system malfunctions, theshort beep
sounds 5times whenthesystem isactivated.
Have thesystem checked byaNISSAN dealer.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The warning systemwillgive thefollowing alarm:
. The hazard indicator blinksandthealarm sounds
intermittently forapproximately 30seconds. (The
alarm willrepeat 8times.) .
The alarm automatically turnsoffafter approxi-
mately 30seconds. However, thealarm reacti-
vates ifthe vehicle istampered withagain.
The alarm isactivated when:
. operating thedoor orthe back doorwithout using
the remote controller, theIntelligent Key orthe
request switch.
. opening thehood (ifequipped) .
. thevolumetric sensingsystem(ultrasonic sensors)
is triggered (whenitis activated) .
. thepower supply isdisconnected.
How tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop byunlocking adoor withthe
request switch(ifequipped) orthe ªUNL OCKº
button onthe Intelligent Key .
. The alarm willstop ifthe ignition switchisplaced
in the ªONº position.
Cancel switchforultrasonic sensor:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94A EAE0
JVP0311X
The ultrasonic sensors
*
A
(volumetric sensing),
located onthe ceiling, detectmovement inthe
passenger's compartment. Whenthetheft warning
system isset tothe armed position, itwill automatically
SECURITY SY STEM
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
switch onthe ultrasonic sensor.
It is possible toexclude theultrasonic (forexample,
when leaving petsinside thecar ortransporting the
vehicle onaferry) .
T o exclude theultrasonic:
1. Close allthe windows.
2. Place theignition switchinthe ªOFFº position.
3. Push thecancel switch
*
B
located onthe ceiling.
The security indicator lightwillstart flashing
rapidly .
4. Close thedoors, hoodandback door. Lockthem
using theremote controller, theIntelligent Key or
the request switch.Thesecurity indicator lightwill
start flashing fasterandabuzzer willsound once.
The ultrasonic sensorisnow excluded fromthetheft
warning system.Allother functions ofthe system
remain activated untilthetheft warning systemis
disarmed again.
For models without ultrasonic sensor
GUID-F6 883F2C-1 8CE-4385-9B AC-D9C25E45F1E2
How toactivate system:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
1. Close allwindows andsunroof (ifequipped) .
The system canbearmed evenifthe
windows areopen.
2. Place theignition switchinthe ªOFFº position.
3. Remove remotecontroller orthe Intelligent Key
from thevehicle.
4. Close alldoors, hoodandback door. Lockall
doors. Thedoors canbelocked withremote
controller orthe Intelligent Key ,door handle
request switch,powerdoorlockswitch or
mechanical key. 5.
Confirm thatthesecurity indicator lightcomes on.
The security indicator lightstays onfor about 30
seconds. Thevehicle security systemisnow pre-
armed. Afterabout 30seconds thevehicle
security systemautomatically shiftsintothearmed
phase. Thesecurity lightbegins toflash once
every approximately 3seconds. If,during this30
seconds pre-armtimeperiod, thedoor isun-
locked, orthe ignition switchisplaced inªONº ,
the system willnot alarm.
Even when thedriver and/or passengers arein
the vehicle, thesystem willactivate withall
doors, hood,andback doorlocked withthe
ignition switchinthe ªLOCKº position. When
placing theignition switchinthe ªONº position,
the system willbereleased.
Theft warning systemoperation:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
The vehicle security systemwillgive thefollowing
alarm:
. The hazard indicator orheadlight blinksandthe
horn sounds intermittently .
. The alarm automatically turnsoffafter approxi-
mately 30or50 seconds. However, thealarm
reactivates ifthe vehicle istampered withagain.
The alarm isactivated by:
. Unlocking thedoor oropening theback door
without usingthebutton onthe remote controller
or the Intelligent Key ,the door handle request
switch orthe mechanical key.(Even ifthe door is
opened byreleasing thedoor inside lockknob, the
alarm willactivate.)
. Opening thehood. How
tostop alarm:
GUID-2201 8305-9BAB- 4201-B6FC-C08EB94AEAE0
. The alarm willstop onlybyunlocking adoor by
pushing theªUNL OCKº button onthe remote
controller orthe Intelligent Key .
. The alarm willnotstop ifthe ignition switchis
placed inthe ªONº position.
NISSAN ANTI-THEFT SYSTEM (NATS)
GUID-5E4 37D07-076 E-4181-8CCF -57AFFB80C485
The NISSAN Anti-Theft System (NATS) willnotallow
the engine tostart without theuse ofthe registered
NA TS key.
If the engine doesnotstart using theregistered NATS
key ,it may bedue tointerference causedby:
. Another NATS key.
. Automated tollroad device.
. Automated paymentdevice.
. Other devices thattransmit similarsignals.
Start theengine usingthefollowing procedure:
1. Remove anyitems thatmay becausing the
interference awayfromtheNATS key.
2. Leave theignition switchinthe ªONº position for
approximately 5seconds.
3. Place theignition switchinthe ªOFFº orªLOCKº
position, andwait approximately 10seconds.
4. Repeat steps2and 3again.
5. Start theengine.
6. Repeat thesteps above untilallpossible inter-
ferences areeliminated.
If this procedure allowstheengine tostart, NISSAN
recommends placingtheregistered NATS key sepa-
rate from other devices toavoid interference.
Pre-driving checksandadjustments
3-21
&RQGLWLRQ
([FHSWIRU&KLQD



> (GLW    0RGHO 7$@
3. Push theback dooruptoopen.
Contact aNISSAN dealerassoon aspossible for
repair.
GARAGE MODESYSTEM
GUID-531 CA4F1-7D23 -438C-A1F3-4CA23C52B39B
The back doorcanbeset toopen toaspecific height
by performing thefollowing:
1. Open theback doorusing therequest switchor
the Intelligent Key .
2. Pull theback doordown tothe desired position
and hold theback door(theback doorwillhave
some resistance whenbeing manually adjusted) .
3. While holding theback doorinposition, pressand
hold theback doorswitch
*
D
located onthe
back doorforapproximately 3seconds oruntil 2
beeps areheard.
The back doorwillopen tothe selected position
setting. To change theposition ofthe back door,
repeat steps1-3forsetting theposition ofthe back
door.
CAUTION:
Do not setthe height ofthe back doorbelow
approximately 1/3ofthe way tothe floor using
garage mode.Evenifyou setthe height below
approximately 1/3ofthe way tothe floor, the
height willautomatically beset toapproximately
1/3 ofthe way tothe floor.
T32A130827-F 6C771EA-041B-45A2 -BC6E-E70D 9FACF7EA
WARNING:
. Fuel isextremely flammable andhighly
explosive undercertain conditions. You
could beburned orseriously injuredifit is
misused ormishandled. Alwaysstopthe
engine anddonot smoke orallow open
flames orsparks nearthevehicle when
refueling.
. Fuel maybeunder pressure. Turn thecap a
half ofaturn, andwait forany ªhissingº
sound tostop toprevent fuelfrom spraying
out and possibly causingpersonal injury.
Then remove thecap.
. Use only anoriginal equipment typefuel
filler capasareplacement. Ithas abuilt-in
safety valveneeded forproper operation of
the fuel system andemission controlsys-
tem. Anincorrect capcanresult inaserious
malfunction andpossible injury.
OPENING FUELFILLER LID
T32A1308 27-0D460FB 6-261C-4E00-B4CB-E4FF 034DD8D 4
SP A2336
T o open thefuel filler lid,pull thefuel filler lidrelease
handle.
FUEL FILLER CAP
T32A1308 27-5BDD6 661-9721-4 13B-9229-2776A0BD4 6DC
SP A2800
The fuelfiller capisaratcheting type.Turn thecap
counterclockwise
*
1
to remove. Tightenthecap
clockwise
*
2
until ratchet clicks,morethantwice,
after refueling.
Put thefuel filler caponthe cap holder
*
A
while
refueling.
CAUTION:
If fuel isspilled onthe vehicle body,flushitaway
with water toavoid paintdamage.
Pre-driving checksandadjustments
3-27
FUEL
FILLER LID
&RQGLWLRQ
([FHSWIRU&KLQD